[RESEND V11 2/3] drm/mediatek: implement the DSI HS packets aligned

Rex-BC Chen rex-bc.chen at mediatek.com
Tue Mar 8 23:36:36 PST 2022


Some DSI RX devices (for example, anx7625) require last alignment of
packets on all lanes after each row of data is sent.
Otherwise, there will be some issues of shift or scroll for screen.

Take horizontal_sync_active_byte for a example,
we roundup the HSA packet data to lane number, and the subtraction of 2
is the packet data value added by the roundup operation, making the
long packets are integer multiples of lane number.
This value (2) varies with the lane number, and that is the reason we
do this operation when the lane number is 4.

In the previous operation of function "mtk_dsi_config_vdo_timing",
the length of HSA and HFP data packets has been adjusted to an
integration multiple of lane number.
Since the number of RGB data packets cannot be guaranteed to be an
integer multiple of lane number, we modify the data packet length of
HBP so that the number of HBP + RGB is equal to the lane number.
So after sending a line of data (HSA + HBP + RGB + HFP), the data
lanes are aligned.

Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>
Signed-off-by: Rex-BC Chen <rex-bc.chen at mediatek.com>
Signed-off-by: Xinlei Lee <xinlei.lee at mediatek.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda at intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu at kernel.org>
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index bced4c7d668e..208463dbf326 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -500,6 +500,18 @@ static void mtk_dsi_config_vdo_timing(struct mtk_dsi *dsi)
 		DRM_WARN("HFP + HBP less than d-phy, FPS will under 60Hz\n");
 	}
 
+	if ((dsi->mode_flags & MIPI_DSI_HS_PKT_END_ALIGNED) &&
+	    (dsi->lanes == 4)) {
+		horizontal_sync_active_byte =
+			roundup(horizontal_sync_active_byte, dsi->lanes) - 2;
+		horizontal_frontporch_byte =
+			roundup(horizontal_frontporch_byte, dsi->lanes) - 2;
+		horizontal_backporch_byte =
+			roundup(horizontal_backporch_byte, dsi->lanes) - 2;
+		horizontal_backporch_byte -=
+			(vm->hactive * dsi_tmp_buf_bpp + 2) % dsi->lanes;
+	}
+
 	writel(horizontal_sync_active_byte, dsi->regs + DSI_HSA_WC);
 	writel(horizontal_backporch_byte, dsi->regs + DSI_HBP_WC);
 	writel(horizontal_frontporch_byte, dsi->regs + DSI_HFP_WC);
-- 
2.18.0




More information about the linux-arm-kernel mailing list