[PATCH v2 3/7] tty: serial: samsung: constify s3c24xx_serial_drv_data
Alim Akhtar
alim.akhtar at samsung.com
Mon Mar 7 10:18:10 PST 2022
>-----Original Message-----
>From: Krzysztof Kozlowski [mailto:krzysztof.kozlowski at canonical.com]
>Sent: Monday, March 7, 2022 1:39 PM
>To: Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>; Alim Akhtar
><alim.akhtar at samsung.com>; Greg Kroah-Hartman
><gregkh at linuxfoundation.org>; Jiri Slaby <jirislaby at kernel.org>; linux-arm-
>kernel at lists.infradead.org; linux-samsung-soc at vger.kernel.org; linux-
>serial at vger.kernel.org; linux-kernel at vger.kernel.org
>Subject: [PATCH v2 3/7] tty: serial: samsung: constify
s3c24xx_serial_drv_data
>
>The driver data (struct s3c24xx_serial_drv_data) is only used to initialize
the
>driver properly and is not modified. Make it const.
>
>Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>
>---
Reviewed-by: Alim Akhtar <alim.akhtar at samsung.com>
> drivers/tty/serial/samsung_tty.c | 130 +++++++++++++++----------------
> 1 file changed, 65 insertions(+), 65 deletions(-)
>
>diff --git a/drivers/tty/serial/samsung_tty.c
>b/drivers/tty/serial/samsung_tty.c
>index a9a75b5b9705..c4b13f2d6e26 100644
>--- a/drivers/tty/serial/samsung_tty.c
>+++ b/drivers/tty/serial/samsung_tty.c
>@@ -136,14 +136,14 @@ struct s3c24xx_uart_port {
> unsigned int tx_mode;
> unsigned int rx_mode;
>
>- struct s3c24xx_uart_info *info;
>+ const struct s3c24xx_uart_info *info;
> struct clk *clk;
> struct clk *baudclk;
> struct uart_port port;
>- struct s3c24xx_serial_drv_data *drv_data;
>+ const struct s3c24xx_serial_drv_data *drv_data;
>
> /* reference to platform data */
>- struct s3c2410_uartcfg *cfg;
>+ const struct s3c2410_uartcfg *cfg;
>
> struct s3c24xx_uart_dma *dma;
>
>@@ -221,7 +221,7 @@ static inline void s3c24xx_clear_bit(struct uart_port
>*port, int idx,
> local_irq_restore(flags);
> }
>
>-static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
>+static inline struct s3c24xx_uart_port *to_ourport(const struct
>+uart_port *port)
> {
> return container_of(port, struct s3c24xx_uart_port, port); } @@ -
>573,13 +573,13 @@ static void s3c24xx_serial_stop_rx(struct uart_port
*port)
> }
> }
>
>-static inline struct s3c24xx_uart_info
>+static inline const struct s3c24xx_uart_info
> *s3c24xx_port_to_info(struct uart_port *port) {
> return to_ourport(port)->info;
> }
>
>-static inline struct s3c2410_uartcfg
>+static inline const struct s3c2410_uartcfg
> *s3c24xx_port_to_cfg(struct uart_port *port) {
> struct s3c24xx_uart_port *ourport;
>@@ -594,7 +594,7 @@ static inline struct s3c2410_uartcfg static int
>s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
> unsigned long ufstat)
> {
>- struct s3c24xx_uart_info *info = ourport->info;
>+ const struct s3c24xx_uart_info *info = ourport->info;
>
> if (ufstat & info->rx_fifofull)
> return ourport->port.fifosize;
>@@ -986,7 +986,7 @@ static irqreturn_t apple_serial_handle_irq(int irq,
void
>*id)
>
> static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port) {
>- struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
>+ const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
> unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT);
> unsigned long ufcon = rd_regl(port, S3C2410_UFCON);
>
>@@ -1405,7 +1405,7 @@ static void s3c24xx_serial_pm(struct uart_port
>*port, unsigned int level,
>
> static inline int s3c24xx_serial_getsource(struct uart_port *port) {
>- struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
>+ const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
> unsigned int ucon;
>
> if (info->num_clks == 1)
>@@ -1419,7 +1419,7 @@ static inline int s3c24xx_serial_getsource(struct
>uart_port *port) static void s3c24xx_serial_setsource(struct uart_port
*port,
> unsigned int clk_sel)
> {
>- struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
>+ const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
> unsigned int ucon;
>
> if (info->num_clks == 1)
>@@ -1438,7 +1438,7 @@ static unsigned int s3c24xx_serial_getclk(struct
>s3c24xx_uart_port *ourport,
> unsigned int req_baud, struct clk **best_clk,
> unsigned int *clk_num)
> {
>- struct s3c24xx_uart_info *info = ourport->info;
>+ const struct s3c24xx_uart_info *info = ourport->info;
> struct clk *clk;
> unsigned long rate;
> unsigned int cnt, baud, quot, best_quot = 0; @@ -1522,7 +1522,7 @@
>static void s3c24xx_serial_set_termios(struct uart_port *port,
> struct ktermios *termios,
> struct ktermios *old)
> {
>- struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
>+ const struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
> struct s3c24xx_uart_port *ourport = to_ourport(port);
> struct clk *clk = ERR_PTR(-EINVAL);
> unsigned long flags;
>@@ -1691,7 +1691,7 @@ static const char *s3c24xx_serial_type(struct
>uart_port *port)
>
> static void s3c24xx_serial_config_port(struct uart_port *port, int flags)
{
>- struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
>+ const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
>
> if (flags & UART_CONFIG_TYPE)
> port->type = info->port_type;
>@@ -1703,7 +1703,7 @@ static void s3c24xx_serial_config_port(struct
>uart_port *port, int flags) static int s3c24xx_serial_verify_port(struct
>uart_port *port, struct serial_struct *ser) {
>- struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
>+ const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
>
> if (ser->type != PORT_UNKNOWN && ser->type != info->port_type)
> return -EINVAL;
>@@ -1873,9 +1873,9 @@
>s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = {
> */
>
> static void s3c24xx_serial_resetport(struct uart_port *port,
>- struct s3c2410_uartcfg *cfg)
>+ const struct s3c2410_uartcfg *cfg)
> {
>- struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
>+ const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
> unsigned long ucon = rd_regl(port, S3C2410_UCON);
>
> ucon &= (info->clksel_mask | info->ucon_mask); @@ -1979,7 +1979,7
>@@ s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
>static int s3c24xx_serial_enable_baudclk(struct s3c24xx_uart_port *ourport)
>{
> struct device *dev = ourport->port.dev;
>- struct s3c24xx_uart_info *info = ourport->info;
>+ const struct s3c24xx_uart_info *info = ourport->info;
> char clk_name[MAX_CLK_NAME_LENGTH];
> unsigned int clk_sel;
> struct clk *clk;
>@@ -2021,7 +2021,7 @@ static int s3c24xx_serial_init_port(struct
>s3c24xx_uart_port *ourport,
> struct platform_device *platdev) {
> struct uart_port *port = &ourport->port;
>- struct s3c2410_uartcfg *cfg = ourport->cfg;
>+ const struct s3c2410_uartcfg *cfg = ourport->cfg;
> struct resource *res;
> int ret;
>
>@@ -2156,7 +2156,7 @@ static const struct of_device_id
>s3c24xx_uart_dt_match[];
>
> static int probe_index;
>
>-static inline struct s3c24xx_serial_drv_data *
>+static inline const struct s3c24xx_serial_drv_data *
> s3c24xx_get_driver_data(struct platform_device *pdev) { #ifdef
>CONFIG_OF @@ -2419,7 +2419,7 @@ static struct uart_port *cons_uart;
>static int s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned
int
>ufcon) {
>- struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
>+ const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
> unsigned long ufstat, utrstat;
>
> if (ufcon & S3C2410_UFCON_FIFOMODE) {
>@@ -2615,7 +2615,7 @@ static struct console s3c24xx_serial_console = {
>#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */
>
> #ifdef CONFIG_CPU_S3C2410
>-static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = {
>+static const struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = {
> .info = {
> .name = "Samsung S3C2410 UART",
> .type = TYPE_S3C24XX,
>@@ -2637,13 +2637,13 @@ static struct s3c24xx_serial_drv_data
>s3c2410_serial_drv_data = {
> .ufcon = S3C2410_UFCON_DEFAULT,
> },
> };
>-#define S3C2410_SERIAL_DRV_DATA
>((kernel_ulong_t)&s3c2410_serial_drv_data)
>+#define S3C2410_SERIAL_DRV_DATA (&s3c2410_serial_drv_data)
> #else
>-#define S3C2410_SERIAL_DRV_DATA (kernel_ulong_t)NULL
>+#define S3C2410_SERIAL_DRV_DATA NULL
> #endif
>
> #ifdef CONFIG_CPU_S3C2412
>-static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = {
>+static const struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = {
> .info = {
> .name = "Samsung S3C2412 UART",
> .type = TYPE_S3C24XX,
>@@ -2666,14 +2666,14 @@ static struct s3c24xx_serial_drv_data
>s3c2412_serial_drv_data = {
> .ufcon = S3C2410_UFCON_DEFAULT,
> },
> };
>-#define S3C2412_SERIAL_DRV_DATA
>((kernel_ulong_t)&s3c2412_serial_drv_data)
>+#define S3C2412_SERIAL_DRV_DATA (&s3c2412_serial_drv_data)
> #else
>-#define S3C2412_SERIAL_DRV_DATA (kernel_ulong_t)NULL
>+#define S3C2412_SERIAL_DRV_DATA NULL
> #endif
>
> #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \
> defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2442) -
>static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = {
>+static const struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = {
> .info = {
> .name = "Samsung S3C2440 UART",
> .type = TYPE_S3C24XX,
>@@ -2697,13 +2697,13 @@ static struct s3c24xx_serial_drv_data
>s3c2440_serial_drv_data = {
> .ufcon = S3C2410_UFCON_DEFAULT,
> },
> };
>-#define S3C2440_SERIAL_DRV_DATA
>((kernel_ulong_t)&s3c2440_serial_drv_data)
>+#define S3C2440_SERIAL_DRV_DATA (&s3c2440_serial_drv_data)
> #else
>-#define S3C2440_SERIAL_DRV_DATA (kernel_ulong_t)NULL
>+#define S3C2440_SERIAL_DRV_DATA NULL
> #endif
>
> #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) -
>static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
>+static const struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
> .info = {
> .name = "Samsung S3C6400 UART",
> .type = TYPE_S3C6400,
>@@ -2726,13 +2726,13 @@ static struct s3c24xx_serial_drv_data
>s3c6400_serial_drv_data = {
> .ufcon = S3C2410_UFCON_DEFAULT,
> },
> };
>-#define S3C6400_SERIAL_DRV_DATA
>((kernel_ulong_t)&s3c6400_serial_drv_data)
>+#define S3C6400_SERIAL_DRV_DATA (&s3c6400_serial_drv_data)
> #else
>-#define S3C6400_SERIAL_DRV_DATA (kernel_ulong_t)NULL
>+#define S3C6400_SERIAL_DRV_DATA NULL
> #endif
>
> #ifdef CONFIG_CPU_S5PV210
>-static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
>+static const struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
> .info = {
> .name = "Samsung S5PV210 UART",
> .type = TYPE_S3C6400,
>@@ -2755,9 +2755,9 @@ static struct s3c24xx_serial_drv_data
>s5pv210_serial_drv_data = {
> },
> .fifosize = { 256, 64, 16, 16 },
> };
>-#define S5PV210_SERIAL_DRV_DATA
>((kernel_ulong_t)&s5pv210_serial_drv_data)
>+#define S5PV210_SERIAL_DRV_DATA (&s5pv210_serial_drv_data)
> #else
>-#define S5PV210_SERIAL_DRV_DATA (kernel_ulong_t)NULL
>+#define S5PV210_SERIAL_DRV_DATA NULL
> #endif
>
> #if defined(CONFIG_ARCH_EXYNOS)
>@@ -2784,33 +2784,33 @@ static struct s3c24xx_serial_drv_data
>s5pv210_serial_drv_data = {
> .has_fracval = 1, \
> } \
>
>-static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
>+static const struct s3c24xx_serial_drv_data exynos4210_serial_drv_data
>+= {
> EXYNOS_COMMON_SERIAL_DRV_DATA(),
> .fifosize = { 256, 64, 16, 16 },
> };
>
>-static struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = {
>+static const struct s3c24xx_serial_drv_data exynos5433_serial_drv_data
>+= {
> EXYNOS_COMMON_SERIAL_DRV_DATA(),
> .fifosize = { 64, 256, 16, 256 },
> };
>
>-static struct s3c24xx_serial_drv_data exynos850_serial_drv_data = {
>+static const struct s3c24xx_serial_drv_data exynos850_serial_drv_data =
>+{
> EXYNOS_COMMON_SERIAL_DRV_DATA(),
> .fifosize = { 256, 64, 64, 64 },
> };
>
>-#define EXYNOS4210_SERIAL_DRV_DATA
>((kernel_ulong_t)&exynos4210_serial_drv_data)
>-#define EXYNOS5433_SERIAL_DRV_DATA
>((kernel_ulong_t)&exynos5433_serial_drv_data)
>-#define EXYNOS850_SERIAL_DRV_DATA
>((kernel_ulong_t)&exynos850_serial_drv_data)
>+#define EXYNOS4210_SERIAL_DRV_DATA (&exynos4210_serial_drv_data)
>+#define EXYNOS5433_SERIAL_DRV_DATA (&exynos5433_serial_drv_data)
>+#define EXYNOS850_SERIAL_DRV_DATA (&exynos850_serial_drv_data)
>
> #else
>-#define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)NULL) -#define
>EXYNOS5433_SERIAL_DRV_DATA ((kernel_ulong_t)NULL) -#define
>EXYNOS850_SERIAL_DRV_DATA ((kernel_ulong_t)NULL)
>+#define EXYNOS4210_SERIAL_DRV_DATA NULL #define
>+EXYNOS5433_SERIAL_DRV_DATA NULL #define
>EXYNOS850_SERIAL_DRV_DATA NULL
> #endif
>
> #ifdef CONFIG_ARCH_APPLE
>-static struct s3c24xx_serial_drv_data s5l_serial_drv_data = {
>+static const struct s3c24xx_serial_drv_data s5l_serial_drv_data = {
> .info = {
> .name = "Apple S5L UART",
> .type = TYPE_APPLE_S5L,
>@@ -2832,39 +2832,39 @@ static struct s3c24xx_serial_drv_data
>s5l_serial_drv_data = {
> .ufcon = S3C2410_UFCON_DEFAULT,
> },
> };
>-#define S5L_SERIAL_DRV_DATA ((kernel_ulong_t)&s5l_serial_drv_data)
>+#define S5L_SERIAL_DRV_DATA (&s5l_serial_drv_data)
> #else
>-#define S5L_SERIAL_DRV_DATA ((kernel_ulong_t)NULL)
>+#define S5L_SERIAL_DRV_DATA NULL
> #endif
>
> static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
> {
> .name = "s3c2410-uart",
>- .driver_data = S3C2410_SERIAL_DRV_DATA,
>+ .driver_data =
>(kernel_ulong_t)S3C2410_SERIAL_DRV_DATA,
> }, {
> .name = "s3c2412-uart",
>- .driver_data = S3C2412_SERIAL_DRV_DATA,
>+ .driver_data =
>(kernel_ulong_t)S3C2412_SERIAL_DRV_DATA,
> }, {
> .name = "s3c2440-uart",
>- .driver_data = S3C2440_SERIAL_DRV_DATA,
>+ .driver_data =
>(kernel_ulong_t)S3C2440_SERIAL_DRV_DATA,
> }, {
> .name = "s3c6400-uart",
>- .driver_data = S3C6400_SERIAL_DRV_DATA,
>+ .driver_data =
>(kernel_ulong_t)S3C6400_SERIAL_DRV_DATA,
> }, {
> .name = "s5pv210-uart",
>- .driver_data = S5PV210_SERIAL_DRV_DATA,
>+ .driver_data =
>(kernel_ulong_t)S5PV210_SERIAL_DRV_DATA,
> }, {
> .name = "exynos4210-uart",
>- .driver_data = EXYNOS4210_SERIAL_DRV_DATA,
>+ .driver_data =
>(kernel_ulong_t)EXYNOS4210_SERIAL_DRV_DATA,
> }, {
> .name = "exynos5433-uart",
>- .driver_data = EXYNOS5433_SERIAL_DRV_DATA,
>+ .driver_data =
>(kernel_ulong_t)EXYNOS5433_SERIAL_DRV_DATA,
> }, {
> .name = "s5l-uart",
>- .driver_data = S5L_SERIAL_DRV_DATA,
>+ .driver_data = (kernel_ulong_t)S5L_SERIAL_DRV_DATA,
> }, {
> .name = "exynos850-uart",
>- .driver_data = EXYNOS850_SERIAL_DRV_DATA,
>+ .driver_data =
>(kernel_ulong_t)EXYNOS850_SERIAL_DRV_DATA,
> },
> { },
> };
>@@ -2873,23 +2873,23 @@ MODULE_DEVICE_TABLE(platform,
>s3c24xx_serial_driver_ids); #ifdef CONFIG_OF static const struct
>of_device_id s3c24xx_uart_dt_match[] = {
> { .compatible = "samsung,s3c2410-uart",
>- .data = (void *)S3C2410_SERIAL_DRV_DATA },
>+ .data = S3C2410_SERIAL_DRV_DATA },
> { .compatible = "samsung,s3c2412-uart",
>- .data = (void *)S3C2412_SERIAL_DRV_DATA },
>+ .data = S3C2412_SERIAL_DRV_DATA },
> { .compatible = "samsung,s3c2440-uart",
>- .data = (void *)S3C2440_SERIAL_DRV_DATA },
>+ .data = S3C2440_SERIAL_DRV_DATA },
> { .compatible = "samsung,s3c6400-uart",
>- .data = (void *)S3C6400_SERIAL_DRV_DATA },
>+ .data = S3C6400_SERIAL_DRV_DATA },
> { .compatible = "samsung,s5pv210-uart",
>- .data = (void *)S5PV210_SERIAL_DRV_DATA },
>+ .data = S5PV210_SERIAL_DRV_DATA },
> { .compatible = "samsung,exynos4210-uart",
>- .data = (void *)EXYNOS4210_SERIAL_DRV_DATA },
>+ .data = EXYNOS4210_SERIAL_DRV_DATA },
> { .compatible = "samsung,exynos5433-uart",
>- .data = (void *)EXYNOS5433_SERIAL_DRV_DATA },
>+ .data = EXYNOS5433_SERIAL_DRV_DATA },
> { .compatible = "apple,s5l-uart",
>- .data = (void *)S5L_SERIAL_DRV_DATA },
>+ .data = S5L_SERIAL_DRV_DATA },
> { .compatible = "samsung,exynos850-uart",
>- .data = (void *)EXYNOS850_SERIAL_DRV_DATA },
>+ .data = EXYNOS850_SERIAL_DRV_DATA },
> {},
> };
> MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
>--
>2.32.0
More information about the linux-arm-kernel
mailing list