[v2 14/17] ASoC: mediatek: mt8186: add machine driver with mt6366, da7219 and max98357
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Mon Mar 7 01:14:29 PST 2022
Il 05/03/22 09:58, Jiaxin Yu ha scritto:
> On Fri, 2022-02-18 at 15:54 +0100, AngeloGioacchino Del Regno wrote:
>> Il 17/02/22 14:42, Jiaxin Yu ha scritto:
>>> This patch adds support for mt8186 board with mt6366, da7219 and
>>> max98357.
>>>
>>> Signed-off-by: Jiaxin Yu <jiaxin.yu at mediatek.com>
>>> ---
>>> .../mt8186/mt8186-mt6366-da7219-max98357.c | 910
>>> ++++++++++++++++++
>>> 1 file changed, 910 insertions(+)
>>> create mode 100644 sound/soc/mediatek/mt8186/mt8186-mt6366-
>>> da7219-max98357.c
>>>
>>> diff --git a/sound/soc/mediatek/mt8186/mt8186-mt6366-da7219-
>>> max98357.c b/sound/soc/mediatek/mt8186/mt8186-mt6366-da7219-
>>> max98357.c
>>> new file mode 100644
>>> index 000000000000..6ba53b8d1e46
>>> --- /dev/null
>>> +++ b/sound/soc/mediatek/mt8186/mt8186-mt6366-da7219-max98357.c
>>> @@ -0,0 +1,910 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +//
>>> +// mt8186-mt6366-da7219-max98357.c
>>> +// -- MT8186-MT6366-DA7219-MAX98357 ALSA SoC machine driver
>>> +//
>>> +// Copyright (c) 2022 MediaTek Inc.
>>> +// Author: Jiaxin Yu <jiaxin.yu at mediatek.com>
>>> +//
>>> +
>>> +#include <linux/input.h>
>>> +#include <linux/module.h>
>>> +#include <linux/pm_runtime.h>
>>> +#include <sound/pcm_params.h>
>>> +#include <sound/soc.h>
>>> +
>>> +#include "../../codecs/da7219-aad.h"
>>> +#include "../../codecs/da7219.h"
>>> +#include "../../codecs/mt6358.h"
>>> +#include "../common/mtk-afe-platform-driver.h"
>>> +#include "mt8186-afe-common.h"
>>> +#include "mt8186-afe-clk.h"
>>> +#include "mt8186-afe-gpio.h"
>>> +
>>> +#define DA7219_CODEC_DAI "da7219-hifi"
>>> +#define DA7219_DEV_NAME "da7219.5-001a"
>>> +
>>> +struct mt8186_mt6366_da7219_max98357_priv {
>>> + struct snd_soc_jack headset_jack, hdmi_jack;
>>> +};
>>> +
>>> +static struct snd_soc_codec_conf mt6366_codec_conf[] = {
>>> + {
>>> + .dlc = COMP_CODEC_CONF("mt6358-sound"),
>>> + .name_prefix = "Mt6366",
>>> + },
>>> +};
>>> +
>>> +static int mt8186_da7219_init(struct snd_soc_pcm_runtime *rtd)
>>> +{
>>> + struct mt8186_mt6366_da7219_max98357_priv *priv =
>>> + snd_soc_card_get_drvdata(rtd->card);
>>> + struct snd_soc_jack *jack = &priv->headset_jack;
>>> + struct snd_soc_component *cmpnt_codec =
>>> + asoc_rtd_to_codec(rtd, 0)->component;
>>> + int ret;
>>> +
>>> + /* Enable Headset and 4 Buttons Jack detection */
>>> + ret = snd_soc_card_jack_new(rtd->card, "Headset Jack",
>>> + SND_JACK_HEADSET | SND_JACK_BTN_0 |
>>> + SND_JACK_BTN_1 | SND_JACK_BTN_2 |
>>> + SND_JACK_BTN_3 | SND_JACK_LINEOUT,
>>> + jack, NULL, 0);
>>> + if (ret) {
>>> + dev_err(rtd->dev, "Headset Jack creation failed: %d\n",
>>> ret);
>>> + return ret;
>>> + }
>>> +
>>> + snd_jack_set_key(jack->jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
>>> + snd_jack_set_key(jack->jack, SND_JACK_BTN_1, KEY_VOLUMEUP);
>>> + snd_jack_set_key(jack->jack, SND_JACK_BTN_2, KEY_VOLUMEDOWN);
>>> + snd_jack_set_key(jack->jack, SND_JACK_BTN_3, KEY_VOICECOMMAND);
>>> +
>>> + da7219_aad_jack_det(cmpnt_codec, &priv->headset_jack);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int mt8186_da7219_i2s_hw_params(struct snd_pcm_substream
>>> *substream,
>>> + struct snd_pcm_hw_params
>>> *params)
>>> +{
>>> + struct snd_soc_pcm_runtime *rtd =
>>> asoc_substream_to_rtd(substream);
>>> + struct snd_soc_dai *codec_dai;
>>> + unsigned int rate = params_rate(params);
>>> + unsigned int mclk_fs_ratio = 256;
>>> + unsigned int mclk_fs = rate * mclk_fs_ratio;
>>> + unsigned int freq;
>>> + int ret = 0, j;
>>> +
>>> + ret = snd_soc_dai_set_sysclk(asoc_rtd_to_cpu(rtd, 0), 0,
>>> + mclk_fs, SND_SOC_CLOCK_OUT);
>>> + if (ret < 0)
>>> + dev_err(rtd->dev, "failed to set cpu dai sysclk\n");
>>
>> Does it really make sense to go on after this failure?
>>
>>> +
>>> + for_each_rtd_codec_dais(rtd, j, codec_dai) {
>>> + if (!strcmp(codec_dai->component->name,
>>> DA7219_DEV_NAME)) {
>>> + ret = snd_soc_dai_set_sysclk(codec_dai,
>>> + DA7219_CLKSRC_MCLK
>>> ,
>>> + mclk_fs,
>>> + SND_SOC_CLOCK_IN);
>>> + if (ret < 0)
>>> + dev_err(rtd->dev, "failed to set
>>> sysclk\n");
>>> +
>>
>> I think that going on past this wouldn't make sense as well, as it
>> may result
>> in unexpected behavior... just return a failure here
>
> Yes, it is.
>>
>>> + if ((rate % 8000) == 0)
>>> + freq = DA7219_PLL_FREQ_OUT_98304;
>>> + else
>>> + freq = DA7219_PLL_FREQ_OUT_90316;
>>> +
>>> + ret = snd_soc_dai_set_pll(codec_dai, 0,
>>> + DA7219_SYSCLK_PLL_SRM
>>> ,
>>> + 0, freq);
>>> + if (ret)
>>> + dev_err(rtd->dev, "failed to start PLL:
>>> %d\n",
>>> + ret);
>>
>> and here
> Yes, you are right.
>
>>
>>> + }
>>> + }
>>> +
>>
>> So, you've covered all failure cases already, for which, you can
>> simply
>> return 0 here.
> Yes, it is.
>
>>
>>> + return ret;
>>> +}
>>> +
>>> +static int mt8186_da7219_i2s_hw_free(struct snd_pcm_substream
>>> *substream)
>>> +{
>>> + struct snd_soc_pcm_runtime *rtd =
>>> asoc_substream_to_rtd(substream);
>>> + struct snd_soc_dai *codec_dai;
>>> + int ret = 0, j;
>>> +
>>> + for_each_rtd_codec_dais(rtd, j, codec_dai) {
>>> + if (!strcmp(codec_dai->component->name,
>>> DA7219_DEV_NAME)) {
>>> + ret = snd_soc_dai_set_pll(codec_dai,
>>> + 0,
>>> DA7219_SYSCLK_MCLK, 0, 0);
>>> + if (ret < 0) {
>>> + dev_err(rtd->dev, "failed to stop PLL:
>>> %d\n",
>>> + ret);
>>> + break;
>>> + }
>>> + }
>>> + }
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +static const struct snd_soc_ops mt8186_da7219_i2s_ops = {
>>> + .hw_params = mt8186_da7219_i2s_hw_params,
>>> + .hw_free = mt8186_da7219_i2s_hw_free,
>>> +};
>>> +
>>> +static int mt8186_mt6366_hdmi_init(struct snd_soc_pcm_runtime
>>> *rtd)
>>> +{
>>> + struct snd_soc_component *cmpnt_codec =
>>> + asoc_rtd_to_codec(rtd, 0)->component;
>>> + struct mt8186_mt6366_da7219_max98357_priv *priv =
>>> + snd_soc_card_get_drvdata(rtd->card);
>>> + int ret;
>>> +
>>> + ret = snd_soc_card_jack_new(rtd->card, "HDMI Jack",
>>> SND_JACK_LINEOUT,
>>> + &priv->hdmi_jack, NULL, 0);
>>> + if (ret) {
>>> + dev_err(rtd->dev, "HDMI Jack creation failed: %d\n",
>>> ret);
>>> + return ret;
>>> + }
>>> +
>>> + return snd_soc_component_set_jack(cmpnt_codec, &priv-
>>>> hdmi_jack, NULL);
>>> +}
>>> +
>>> +static int mt8186_mt6366_init(struct snd_soc_pcm_runtime *rtd)
>>> +{
>>> + struct snd_soc_component *cmpnt_afe =
>>> + snd_soc_rtdcom_lookup(rtd, AFE_PCM_NAME);
>>> + struct snd_soc_component *cmpnt_codec =
>>> + asoc_rtd_to_codec(rtd, 0)->component;
>>> + struct mtk_base_afe *afe =
>>> snd_soc_component_get_drvdata(cmpnt_afe);
>>> + struct mt8186_afe_private *afe_priv = afe->platform_priv;
>>> + struct snd_soc_dapm_context *dapm = &rtd->card->dapm;
>>> + int ret;
>>> +
>>> + /* set mtkaif protocol */
>>> + mt6358_set_mtkaif_protocol(cmpnt_codec,
>>> + MT6358_MTKAIF_PROTOCOL_1);
>>> + afe_priv->mtkaif_protocol = MT6358_MTKAIF_PROTOCOL_1;
>>> +
>>> + ret = snd_soc_dapm_sync(dapm);
>>> + if (ret) {
>>> + dev_info(rtd->dev, "failed to snd_soc_dapm_sync\n");
>>
>> dev_err()
>>
>>> + return ret;
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int mt8186_i2s_hw_params_fixup(struct snd_soc_pcm_runtime
>>> *rtd,
>>> + struct snd_pcm_hw_params *params)
>>> +{
>>> + struct snd_interval *channels = hw_param_interval(params,
>>> + SNDRV_PCM_HW_PARAM_CHANNELS);
>>> + dev_info(rtd->dev, "%s(), fix format to 32bit\n", __func__);
>>> +
>>
>> dev_dbg()
>>
>>> + /* fix BE i2s channel to 2 channel */
>>> + channels->min = 2;
>>> + channels->max = 2;
>>> +
>>> + /* fix BE i2s format to S32_LE, clean param mask first */
>>> + snd_mask_reset_range(hw_param_mask(params,
>>> SNDRV_PCM_HW_PARAM_FORMAT),
>>> + 0, (__force unsigned
>>> int)SNDRV_PCM_FORMAT_LAST);
>>> +
>>> + params_set_format(params, SNDRV_PCM_FORMAT_S32_LE);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int mt8186_hdmi_i2s_hw_params_fixup(struct
>>> snd_soc_pcm_runtime *rtd,
>>> + struct snd_pcm_hw_params
>>> *params)
>>> +{
>>> + struct snd_interval *channels = hw_param_interval(params,
>>> + SNDRV_PCM_HW_PARAM_CHANNELS);
>>> + dev_info(rtd->dev, "%s(), fix format to 32bit\n", __func__);
>>> +
>>
>> dev_dbg()
>>
>>> + /* fix BE i2s channel to 2 channel */
>>> + channels->min = 2;
>>> + channels->max = 2;
>>> +
>>> + /* fix BE i2s format to S24_LE, clean param mask first */
>>> + snd_mask_reset_range(hw_param_mask(params,
>>> SNDRV_PCM_HW_PARAM_FORMAT),
>>> + 0, (__force unsigned
>>> int)SNDRV_PCM_FORMAT_LAST);
>>> +
>>> + params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
>>> +
>>> + return 0;
>>> +}
>>
>
> Ok, I will use this code which is really more concise.
>
>> Besides, I would do the following instead:
>>
>> static int mt8186_hw_params_fixup(struct snd_soc_pcm_runtime *rtd,
>>
>> struct snd_pcm_hw_params *params,
>>
>> snd_pcm_format_t fmt)
>>
>> {
>>
>> struct snd_interval *channels = hw_param_interval(params,
>>
>> SNDRV_PCM_HW_PARAM_CHANNELS);
>>
>> dev_dbg(rtd->dev, "%s(), fix format to 32bit\n", __func__);
>>
>>
>>
>> /* fix BE i2s channel to 2 channel */
>>
>> channels->min = 2;
>>
>> channels->max = 2;
>>
>>
>>
>> /* fix BE i2s format to S32_LE, clean param mask first */
>>
>> snd_mask_reset_range(hw_param_mask(params,
>> SNDRV_PCM_HW_PARAM_FORMAT),
>>
>> 0, (__force unsigned
>> int)SNDRV_PCM_FORMAT_LAST);
>>
>>
>>
>> params_set_format(params, fmt);
>>
>>
>>
>> return 0;
>>
>> }
>>
>>
>>
>> static int mt8186_i2s_hw_params_fixup(struct snd_soc_pcm_runtime
>> *rtd,
>>
>> struct snd_pcm_hw_params *params)
>>
>> {
>>
>> return mt8186_hw_params_fixup(rtd, params,
>> SNDRV_PCM_FORMAT_S32_LE);
>>
>> }
>>
>>
>>
>> static int mt8186_hdmi_i2s_hw_params_fixup(struct snd_soc_pcm_runtime
>> *rtd,
>>
>> struct snd_pcm_hw_params
>> *params)
>>
>> {
>>
>> return mt8186_hw_params_fixup(rtd, params,
>> SNDRV_PCM_FORMAT_S24_LE);
>>
>> }
>>
>> ... this reduces code duplication!
>>
>>> +
>>> +/* FE */
>>> +SND_SOC_DAILINK_DEFS(playback1,
>>> + DAILINK_COMP_ARRAY(COMP_CPU("DL1")),
>>> + DAILINK_COMP_ARRAY(COMP_DUMMY()),
>>> + DAILINK_COMP_ARRAY(COMP_EMPTY()));
>>
>>
>> ..snip..
>>
>>> +static int mt8186_mt6366_da7219_max98357_dev_probe(struct
>>> platform_device *pdev)
>>> +{
>>> + struct snd_soc_card *card =
>>> &mt8186_mt6366_da7219_max98357_soc_card;
>>> + struct snd_soc_dai_link *dai_link;
>>> + struct mt8186_mt6366_da7219_max98357_priv *priv;
>>> + struct device_node *platform_node, *hdmi_codec;
>>> + int ret, i;
>>> +
>>> + dev_info(&pdev->dev, "%s(), ++\n", __func__);
>>> +
>>> + card->dev = &pdev->dev;
>>> +
>>> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
>>> + if (!priv)
>>> + return -ENOMEM;
>>> +
>>> + platform_node = of_parse_phandle(pdev->dev.of_node,
>>> + "mediatek,platform", 0);
>>> + if (!platform_node) {
>>> + dev_info(&pdev->dev,
>>> + "Property 'platform' missing or invalid\n");
>>
>> if (!platform_node)
>> return dev_err_probe(&pdev->dev, -EINVAL,
>> "mediatek,platform missing or
>> invalid\n");
>>
>>> + return -EINVAL;
> got err_platform_node;
>>> + }
>>> +
>>> + hdmi_codec = of_parse_phandle(pdev->dev.of_node,
>>> + "mediatek,hdmi-codec", 0);
>>> + if (!hdmi_codec) {
>>> + dev_info(&pdev->dev,
>>> + "Property 'hdmi' missing or invalid\n");
>>
>> dev_err()
>>
>>> + return -EINVAL;
>>> + }
> Should I of_node_put(platform_node) befor return?
>
> goto err_hdmi_node;
>
of_node_put() has to be called only when of_parse_phandle() succeeds,
otherwise there is nothing to put.
>
>>> +
>>> + for_each_card_prelinks(card, i, dai_link) {
>>> + if (dai_link->platforms->name)
>>> + continue;
>>> +
>>> + if (hdmi_codec && strcmp(dai_link->name, "I2S3") == 0)
>>> {
>>> + dai_link->codecs->of_node = hdmi_codec;
>>> + dai_link->ignore = 0;
>>> + }
>>> +
>>> + dai_link->platforms->of_node = platform_node;
>>> + }
>>> +
>>> + snd_soc_card_set_drvdata(card, priv);
>>> +
>>> + /* init gpio */
>>> + ret = mt8186_afe_gpio_init(&pdev->dev);
>>> + if (ret)
>>> + dev_info(&pdev->dev, "init gpio error\n");
>>
>> dev_err() and goto end;
> Yes, goto err_init_gpio and of_node_put for hdmi_codec and
> platform_node.
Yes, agreed.
Regards,
Angelo
>>
>>> +
>>> + dev_info(&pdev->dev, "%s(), devm_snd_soc_register_card\n",
>>> __func__);
>>> + ret = devm_snd_soc_register_card(&pdev->dev, card);
>>> + if (ret)
>>> + dev_info(&pdev->dev, "%s snd_soc_register_card fail
>>> %d\n",
>>> + __func__, ret);
>>
>> dev_err_probe()
>>
>> end:
>>
> err_init_gpio:
>>> + of_node_put(hdmi_codec);
> err_hdmi_node:
>>> + of_node_put(platform_node);
>>> +
> err_platform_node:
>>> + return ret;
>>> +}
>>> +
>>> +#if IS_ENABLED(CONFIG_OF)
>>> +static const struct of_device_id
>>> mt8186_mt6366_da7219_max98357_dt_match[] = {
>>> + {.compatible =
>>> "mediatek,mt8186_mt6366_da7219_max98357_sound",},
>>> + {}
>>> +};
>>> +#endif
>>> +
>>> +static struct platform_driver mt8186_mt6366_da7219_max98357_driver
>>> = {
>>> + .driver = {
>>> + .name = "mt8186_mt6366_da7219_max98357",
>>> +#if IS_ENABLED(CONFIG_OF)
>>> + .of_match_table =
>>> mt8186_mt6366_da7219_max98357_dt_match,
>>> +#endif
>>> + .pm = &snd_soc_pm_ops,
>>> + },
>>> + .probe = mt8186_mt6366_da7219_max98357_dev_probe,
>>> +};
>>> +
>>> +module_platform_driver(mt8186_mt6366_da7219_max98357_driver);
>>> +
>>> +/* Module information */
>>> +MODULE_DESCRIPTION("MT8186-MT6366-DA7219-MAX98357 ALSA SoC machine
>>> driver");
>>> +MODULE_AUTHOR("Jiaxin Yu <jiaxin.yu at mediatek.com>");
>>> +MODULE_LICENSE("GPL v2");
>>> +MODULE_ALIAS("mt8186_mt6366_da7219_max98357 soc card");
>>
>>
>
More information about the linux-arm-kernel
mailing list