[PATCH] crypto: xilinx: prevent probing on non-xilinx hardware

[Corentin Labbe]

The zynqmp-sha driver is always loaded and register its algorithm even on
platform which do not have the proper hardware.
This lead to a stacktrace due to zynqmp-sha3-384 failing its crypto
self tests.
So check if hardware is present via the firmware API call get_version.

While at it, simplify the platform_driver by using module_platform_driver()

Furthermore the driver should depend on ZYNQMP_FIRMWARE since it cannot
work without it.

Fixes: 7ecc3e34474b ("crypto: xilinx - Add Xilinx SHA3 driver")
Signed-off-by: Corentin Labbe <clabbe at baylibre.com>
---
 drivers/crypto/Kconfig             |  2 +-
 drivers/crypto/xilinx/zynqmp-sha.c | 35 +++++++-----------------------
 2 files changed, 9 insertions(+), 28 deletions(-)

diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 51df3cd9934f..52bb632a91d5 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -822,7 +822,7 @@ config CRYPTO_DEV_ZYNQMP_AES
 
 config CRYPTO_DEV_ZYNQMP_SHA3
 	bool "Support for Xilinx ZynqMP SHA3 hardware accelerator"
-	depends on ARCH_ZYNQMP
+	depends on ZYNQMP_FIRMWARE
 	select CRYPTO_SHA3
 	help
 	  Xilinx ZynqMP has SHA3 engine used for secure hash calculation.
diff --git a/drivers/crypto/xilinx/zynqmp-sha.c b/drivers/crypto/xilinx/zynqmp-sha.c
index 89549f4788ba..43ff170ff1c2 100644
--- a/drivers/crypto/xilinx/zynqmp-sha.c
+++ b/drivers/crypto/xilinx/zynqmp-sha.c
@@ -193,6 +193,13 @@ static int zynqmp_sha_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	int err;
+	u32 v;
+
+	/* Verify the hardware is present */
+	err = zynqmp_pm_get_api_version(&v);
+	if (err)
+		return err;
+
 
 	err = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(ZYNQMP_DMA_BIT_MASK));
 	if (err < 0) {
@@ -251,33 +258,7 @@ static struct platform_driver zynqmp_sha_driver = {
 	},
 };
 
-static int __init sha_driver_init(void)
-{
-	struct platform_device *pdev;
-	int ret;
-
-	ret = platform_driver_register(&zynqmp_sha_driver);
-	if (ret)
-		return ret;
-
-	pdev = platform_device_register_simple(zynqmp_sha_driver.driver.name,
-					       0, NULL, 0);
-	if (IS_ERR(pdev)) {
-		ret = PTR_ERR(pdev);
-		platform_driver_unregister(&zynqmp_sha_driver);
-		pr_info("Failed to register ZynqMP SHA3 dvixe %d\n", ret);
-	}
-
-	return ret;
-}
-
-device_initcall(sha_driver_init);
-
-static void __exit sha_driver_exit(void)
-{
-	platform_driver_unregister(&zynqmp_sha_driver);
-}
-
+module_platform_driver(zynqmp_sha_driver);
 MODULE_DESCRIPTION("ZynqMP SHA3 hardware acceleration support.");
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Harsha <harsha.harsha at xilinx.com>");
-- 
2.34.1