[v2 11/17] ASoC: mediatek: mt8186: support gpio control in platform driver
Jiaxin Yu
jiaxin.yu at mediatek.com
Thu Mar 3 07:30:46 PST 2022
On Fri, 2022-02-18 at 15:54 +0100, AngeloGioacchino Del Regno wrote:
> Il 17/02/22 14:41, Jiaxin Yu ha scritto:
> > This patch add gpio control for all audio interface separately.
> >
> > Signed-off-by: Jiaxin Yu <jiaxin.yu at mediatek.com>
> > ---
> > sound/soc/mediatek/mt8186/mt8186-afe-gpio.c | 210
> > ++++++++++++++++++++
> > sound/soc/mediatek/mt8186/mt8186-afe-gpio.h | 19 ++
> > 2 files changed, 229 insertions(+)
> > create mode 100644 sound/soc/mediatek/mt8186/mt8186-afe-gpio.c
> > create mode 100644 sound/soc/mediatek/mt8186/mt8186-afe-gpio.h
> >
> > diff --git a/sound/soc/mediatek/mt8186/mt8186-afe-gpio.c
> > b/sound/soc/mediatek/mt8186/mt8186-afe-gpio.c
> > new file mode 100644
> > index 000000000000..6faec5c95bf3
> > --- /dev/null
> > +++ b/sound/soc/mediatek/mt8186/mt8186-afe-gpio.c
> > @@ -0,0 +1,210 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +//
> > +// mt8186-afe-gpio.c -- Mediatek 8186 afe gpio ctrl
> > +//
> > +// Copyright (c) 2022 MediaTek Inc.
> > +// Author: Jiaxin Yu <jiaxin.yu at mediatek.com>
> > +
> > +#include <linux/gpio.h>
> > +#include <linux/pinctrl/consumer.h>
> > +
> > +#include "mt8186-afe-common.h"
> > +#include "mt8186-afe-gpio.h"
> > +
> > +struct pinctrl *aud_pinctrl;
> > +
> > +enum mt8186_afe_gpio {
> > + MT8186_AFE_GPIO_CLK_MOSI_OFF,
> > + MT8186_AFE_GPIO_CLK_MOSI_ON,
> > + MT8186_AFE_GPIO_CLK_MISO_OFF,
> > + MT8186_AFE_GPIO_CLK_MISO_ON,
> > + MT8186_AFE_GPIO_DAT_MISO_OFF,
> > + MT8186_AFE_GPIO_DAT_MISO_ON,
> > + MT8186_AFE_GPIO_DAT_MOSI_OFF,
> > + MT8186_AFE_GPIO_DAT_MOSI_ON,
> > + MT8186_AFE_GPIO_I2S0_OFF,
> > + MT8186_AFE_GPIO_I2S0_ON,
> > + MT8186_AFE_GPIO_I2S1_OFF,
> > + MT8186_AFE_GPIO_I2S1_ON,
> > + MT8186_AFE_GPIO_I2S2_OFF,
> > + MT8186_AFE_GPIO_I2S2_ON,
> > + MT8186_AFE_GPIO_I2S3_OFF,
> > + MT8186_AFE_GPIO_I2S3_ON,
> > + MT8186_AFE_GPIO_TDM_OFF,
> > + MT8186_AFE_GPIO_TDM_ON,
> > + MT8186_AFE_GPIO_PCM_OFF,
> > + MT8186_AFE_GPIO_PCM_ON,
> > + MT8186_AFE_GPIO_GPIO_NUM
> > +};
> > +
> > +struct audio_gpio_attr {
> > + const char *name;
> > + bool gpio_prepare;
> > + struct pinctrl_state *gpioctrl;
> > +};
> > +
> > +static struct audio_gpio_attr aud_gpios[MT8186_AFE_GPIO_GPIO_NUM]
> > = {
> > + [MT8186_AFE_GPIO_CLK_MOSI_OFF] = {"aud_clk_mosi_off", false,
> > NULL},
> > + [MT8186_AFE_GPIO_CLK_MOSI_ON] = {"aud_clk_mosi_on", false,
> > NULL},
> > + [MT8186_AFE_GPIO_CLK_MISO_OFF] = {"aud_clk_miso_off", false,
> > NULL},
> > + [MT8186_AFE_GPIO_CLK_MISO_ON] = {"aud_clk_miso_on", false,
> > NULL},
> > + [MT8186_AFE_GPIO_DAT_MISO_OFF] = {"aud_dat_miso_off", false,
> > NULL},
> > + [MT8186_AFE_GPIO_DAT_MISO_ON] = {"aud_dat_miso_on", false,
> > NULL},
> > + [MT8186_AFE_GPIO_DAT_MOSI_OFF] = {"aud_dat_mosi_off", false,
> > NULL},
> > + [MT8186_AFE_GPIO_DAT_MOSI_ON] = {"aud_dat_mosi_on", false,
> > NULL},
> > + [MT8186_AFE_GPIO_I2S0_OFF] = {"aud_gpio_i2s0_off", false,
> > NULL},
> > + [MT8186_AFE_GPIO_I2S0_ON] = {"aud_gpio_i2s0_on", false, NULL},
> > + [MT8186_AFE_GPIO_I2S1_OFF] = {"aud_gpio_i2s1_off", false,
> > NULL},
> > + [MT8186_AFE_GPIO_I2S1_ON] = {"aud_gpio_i2s1_on", false, NULL},
> > + [MT8186_AFE_GPIO_I2S2_OFF] = {"aud_gpio_i2s2_off", false,
> > NULL},
> > + [MT8186_AFE_GPIO_I2S2_ON] = {"aud_gpio_i2s2_on", false, NULL},
> > + [MT8186_AFE_GPIO_I2S3_OFF] = {"aud_gpio_i2s3_off", false,
> > NULL},
> > + [MT8186_AFE_GPIO_I2S3_ON] = {"aud_gpio_i2s3_on", false, NULL},
> > + [MT8186_AFE_GPIO_TDM_OFF] = {"aud_gpio_tdm_off", false, NULL},
> > + [MT8186_AFE_GPIO_TDM_ON] = {"aud_gpio_tdm_on", false, NULL},
> > + [MT8186_AFE_GPIO_PCM_OFF] = {"aud_gpio_pcm_off", false, NULL},
> > + [MT8186_AFE_GPIO_PCM_ON] = {"aud_gpio_pcm_on", false, NULL},
> > +};
> > +
> > +static DEFINE_MUTEX(gpio_request_mutex);
> > +
> > +int mt8186_afe_gpio_init(struct device *dev)
> > +{
> > + int ret;
> > + int i = 0;
> > +
> > + aud_pinctrl = devm_pinctrl_get(dev);
> > + if (IS_ERR(aud_pinctrl)) {
> > + ret = PTR_ERR(aud_pinctrl);
> > + dev_info(dev, "%s(), ret %d, cannot get
> > aud_pinctrl!\n",
> > + __func__, ret);
>
> dev_err()
> ... and return ret.
>
> > + return -ENODEV;
> > + }
> > +
> > + for (i = 0; i < ARRAY_SIZE(aud_gpios); i++) {
> > + aud_gpios[i].gpioctrl =
> > pinctrl_lookup_state(aud_pinctrl,
> > + aud_gpios[
> > i].name);
> > + if (IS_ERR(aud_gpios[i].gpioctrl)) {
> > + ret = PTR_ERR(aud_gpios[i].gpioctrl);
> > + dev_info(dev, "%s(), pinctrl_lookup_state %s
> > fail, ret %d\n",
> > + __func__, aud_gpios[i].name, ret);
>
> dev_err()
>
> P.S.: I think that this function should return ret, at this point, to
> avoid
> unexpected behavior.
Because we maybe don't need to config all of audio interface gpio in
dtsi. for example, we may only use I2S0/I2S1 instead of I2S3/I2S4, so
there only config I2S0/I2S1's pinctrl in dtsi. So I think there only
need dev_info() as a reminder. How do you suggest for it?
>
>
> > + } else {
> > + aud_gpios[i].gpio_prepare = true;
> > + }
> > + }
> > +
> > + /* gpio status init */
> > + mt8186_afe_gpio_request(dev, false, MT8186_DAI_ADDA, 0);
> > + mt8186_afe_gpio_request(dev, false, MT8186_DAI_ADDA, 1);
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL_GPL(mt8186_afe_gpio_init);
> > +
> > +static int mt8186_afe_gpio_select(struct device *dev,
> > + enum mt8186_afe_gpio type)
> > +{
> > + int ret = 0;
> > +
> > + if (type < 0 || type >= MT8186_AFE_GPIO_GPIO_NUM) {
> > + dev_info(dev, "%s(), error, invalid gpio type %d\n",
> > + __func__, type);
> > + return -EINVAL;
> > + }
> > +
> > + if (!aud_gpios[type].gpio_prepare) {
> > + dev_info(dev, "%s(), error, gpio type %d not
> > prepared\n",
> > + __func__, type);
> > + return -EIO;
> > + }
> > +
> > + ret = pinctrl_select_state(aud_pinctrl,
> > + aud_gpios[type].gpioctrl);
> > + if (ret)
> > + dev_info(dev, "%s(), error, can not set gpio type
> > %d\n",
> > + __func__, type);
> > +
> > + return ret;
>
> Please change it like so:
>
> if (ret) {
> dev_err(dev, "Failed to select picntrl state for type
> %d\n", type);
> return ret;
> }
>
> return 0;
>
> > +}
> > +
> > +static int mt8186_afe_gpio_adda_dl(struct device *dev, bool
> > enable)
> > +{
> > + if (enable) {
> > + mt8186_afe_gpio_select(dev,
> > MT8186_AFE_GPIO_CLK_MOSI_ON);
> > + mt8186_afe_gpio_select(dev,
> > MT8186_AFE_GPIO_DAT_MOSI_ON);
> > + } else {
> > + mt8186_afe_gpio_select(dev,
> > MT8186_AFE_GPIO_DAT_MOSI_OFF);
> > + mt8186_afe_gpio_select(dev,
> > MT8186_AFE_GPIO_CLK_MOSI_OFF);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int mt8186_afe_gpio_adda_ul(struct device *dev, bool
> > enable)
> > +{
> > + if (enable) {
> > + mt8186_afe_gpio_select(dev,
> > MT8186_AFE_GPIO_CLK_MISO_ON);
> > + mt8186_afe_gpio_select(dev,
> > MT8186_AFE_GPIO_DAT_MISO_ON);
> > + } else {
> > + mt8186_afe_gpio_select(dev,
> > MT8186_AFE_GPIO_DAT_MISO_OFF);
> > + mt8186_afe_gpio_select(dev,
> > MT8186_AFE_GPIO_CLK_MISO_OFF);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +int mt8186_afe_gpio_request(struct device *dev, bool enable,
> > + int dai, int uplink)
> > +{
>
> I think that it's more readable and even shorter if you do:
>
> enum mt8186_afe_gpio sel;
>
> int ret = -EINVAL;
>
>
>
> mutex_lock(&gpio_request_mutex);
>
>
>
> switch (dai) {
>
> case MT8186_DAI_ADDA:
> if (uplink)
> ret = mt8186_afe_gpio_adda_ul(dev, enable);
> else
> ret = mt8186_afe_gpio_adda_dl(dev, enable);
> goto unlock;
> case MT8186_DAI_I2S_0:
>
> sel = enable ? MT8186_AFE_GPIO_I2S0_ON :
> MT8186_AFE_GPIO_I2S0_OFF;
>
> break;
>
> case MT8186_DAI_I2S_1:
>
> sel = enable ? MT8186_AFE_GPIO_I2S1_ON :
> MT8186_AFE_GPIO_I2S1_OFF;
>
> break;
>
>
>
> .................... all other cases ................
>
> default:
>
> dev_err(dev, "invalid dai %d\n", dai);
>
> goto unlock;
>
> }
>
>
> ret = mt8186_afe_gpio_select(dev, sel);
>
>
> unlock:
>
> mutex_unlock(&gpio_request_mutex);
>
> return ret;
> }
>
> > + mutex_lock(&gpio_request_mutex);
> > + switch (dai) {
> > + case MT8186_DAI_ADDA:
> > + if (uplink)
> > + mt8186_afe_gpio_adda_ul(dev, enable);
> > + else
> > + mt8186_afe_gpio_adda_dl(dev, enable);
> > + break;
> > + case MT8186_DAI_I2S_0:
> > + if (enable)
> > + mt8186_afe_gpio_select(dev,
> > MT8186_AFE_GPIO_I2S0_ON);
> > + else
> > + mt8186_afe_gpio_select(dev,
> > MT8186_AFE_GPIO_I2S0_OFF);
> > + break;
> > + case MT8186_DAI_I2S_1:
> > + if (enable)
> > + mt8186_afe_gpio_select(dev,
> > MT8186_AFE_GPIO_I2S1_ON);
> > + else
> > + mt8186_afe_gpio_select(dev,
> > MT8186_AFE_GPIO_I2S1_OFF);
> > + break;
> > + case MT8186_DAI_I2S_2:
> > + if (enable)
> > + mt8186_afe_gpio_select(dev,
> > MT8186_AFE_GPIO_I2S2_ON);
> > + else
> > + mt8186_afe_gpio_select(dev,
> > MT8186_AFE_GPIO_I2S2_OFF);
> > + break;
> > + case MT8186_DAI_I2S_3:
> > + if (enable)
> > + mt8186_afe_gpio_select(dev,
> > MT8186_AFE_GPIO_I2S3_ON);
> > + else
> > + mt8186_afe_gpio_select(dev,
> > MT8186_AFE_GPIO_I2S3_OFF);
> > + break;
> > + case MT8186_DAI_TDM_IN:
> > + if (enable)
> > + mt8186_afe_gpio_select(dev,
> > MT8186_AFE_GPIO_TDM_ON);
> > + else
> > + mt8186_afe_gpio_select(dev,
> > MT8186_AFE_GPIO_TDM_OFF);
> > + break;
> > + case MT8186_DAI_PCM:
> > + if (enable)
> > + mt8186_afe_gpio_select(dev,
> > MT8186_AFE_GPIO_PCM_ON);
> > + else
> > + mt8186_afe_gpio_select(dev,
> > MT8186_AFE_GPIO_PCM_OFF);
> > + break;
> > + default:
> > + mutex_unlock(&gpio_request_mutex);
> > + dev_info(dev, "%s(), invalid dai %d\n", __func__, dai);
> > + return -EINVAL;
> > + }
> > + mutex_unlock(&gpio_request_mutex);
> > + return 0;
> > +}
> > diff --git a/sound/soc/mediatek/mt8186/mt8186-afe-gpio.h
> > b/sound/soc/mediatek/mt8186/mt8186-afe-gpio.h
> > new file mode 100644
> > index 000000000000..1ddc27838eb1
> > --- /dev/null
> > +++ b/sound/soc/mediatek/mt8186/mt8186-afe-gpio.h
> > @@ -0,0 +1,19 @@
> > +/* SPDX-License-Identifier: GPL-2.0
> > + *
> > + * mt6833-afe-gpio.h -- Mediatek 6833 afe gpio ctrl definition
> > + *
> > + * Copyright (c) 2022 MediaTek Inc.
> > + * Author: Jiaxin Yu <jiaxin.yu at mediatek.com>
> > + */
> > +
> > +#ifndef _MT8186_AFE_GPIO_H_
> > +#define _MT8186_AFE_GPIO_H_
> > +
> > +struct mtk_base_afe;
> > +
> > +int mt8186_afe_gpio_init(struct device *dev);
> > +
> > +int mt8186_afe_gpio_request(struct device *dev, bool enable,
> > + int dai, int uplink);
> > +
> > +#endif
>
>
More information about the linux-arm-kernel
mailing list