[PATCH v2] arm64: defconfig: Enable SC7180 interconnect driver

[Nícolas F. R. A. Prado]

On Mon, Jan 31, 2022 at 12:32:23PM -0500, Nícolas F. R. A. Prado wrote:
> From: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
> 
> On SC7180 device trees, almost all of the nodes are declaring
> interconnect properties, including the QUP nodes: at least on
> some machines, leaving this configuration option disabled, or
> as a module, the kernel appears to hang while initializing the
> QUP node containing the UART device.
> 
> To solve this issue, enable the interconnect driver for this
> SoC as built-in.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
> Tested-by: "kernelci.org bot" <bot at kernelci.org>
> Acked-by: Georgi Djakov <djakov at kernel.org>
> [rebased on top of mainline]
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado at collabora.com>

Hi Bjorn, could you pick this, as well as
https://lore.kernel.org/all/20220201200504.854917-1-nfraprado@collabora.com/,
up for arm64-defconfig-for-5.18?

Both series apply cleanly on that branch. Thanks!

Nícolas

> ---
> Changes in v2:
> - Just rebased and fixed conflicts
> 
> v1: https://lore.kernel.org/lkml/20211011154003.904355-1-angelogioacchino.delregno@collabora.com/T/#u
> 
>  arch/arm64/configs/defconfig | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index 30516dc0b70e..68913a575784 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -1191,6 +1191,7 @@ CONFIG_INTERCONNECT_IMX8MQ=m
>  CONFIG_INTERCONNECT_QCOM=y
>  CONFIG_INTERCONNECT_QCOM_MSM8916=m
>  CONFIG_INTERCONNECT_QCOM_OSM_L3=m
> +CONFIG_INTERCONNECT_QCOM_SC7180=y
>  CONFIG_INTERCONNECT_QCOM_SC7280=y
>  CONFIG_INTERCONNECT_QCOM_SDM845=y
>  CONFIG_INTERCONNECT_QCOM_SM8150=m
> -- 
> 2.35.1
> 
> 
> -- 
> To unsubscribe, send mail to kernel-unsubscribe at lists.collabora.co.uk.