[PATCH 1/1] arm64: dts: mediatek: add clock support for mt7986a

[Matthias Brugger]

On 19/01/2022 13:36, Sam Shih wrote:
> Add clock controller nodes, include 40M clock source, topckgen,
> infracfg, apmixedsys and ethernet subsystem.
> 
> Signed-off-by: Sam Shih <sam.shih at mediatek.com>

Applied, thanks!

> ---
>   arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 68 +++++++++++++++++++++--
>   1 file changed, 63 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> index b8da76b6ba47..694acf8f5b70 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> @@ -6,16 +6,18 @@
>   
>   #include <dt-bindings/interrupt-controller/irq.h>
>   #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/mt7986-clk.h>
>   
>   / {
>   	interrupt-parent = <&gic>;
>   	#address-cells = <2>;
>   	#size-cells = <2>;
>   
> -	system_clk: dummy40m {
> +	clk40m: oscillator at 0 {
>   		compatible = "fixed-clock";
>   		clock-frequency = <40000000>;
>   		#clock-cells = <0>;
> +		clock-output-names = "clkxtal";
>   	};
>   
>   	cpus {
> @@ -98,6 +100,18 @@ gic: interrupt-controller at c000000 {
>   			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
>   		};
>   
> +		infracfg: infracfg at 10001000 {
> +			compatible = "mediatek,mt7986-infracfg", "syscon";
> +			reg = <0 0x10001000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		topckgen: topckgen at 1001b000 {
> +			compatible = "mediatek,mt7986-topckgen", "syscon";
> +			reg = <0 0x1001B000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
>   		watchdog: watchdog at 1001c000 {
>   			compatible = "mediatek,mt7986-wdt",
>   				     "mediatek,mt6589-wdt";
> @@ -107,6 +121,12 @@ watchdog: watchdog at 1001c000 {
>   			status = "disabled";
>   		};
>   
> +		apmixedsys: apmixedsys at 1001e000 {
> +			compatible = "mediatek,mt7986-apmixedsys";
> +			reg = <0 0x1001E000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
>   		pio: pinctrl at 1001f000 {
>   			compatible = "mediatek,mt7986a-pinctrl";
>   			reg = <0 0x1001f000 0 0x1000>,
> @@ -128,11 +148,25 @@ pio: pinctrl at 1001f000 {
>   			#interrupt-cells = <2>;
>   		};
>   
> +		sgmiisys0: syscon at 10060000 {
> +			compatible = "mediatek,mt7986-sgmiisys_0",
> +				     "syscon";
> +			reg = <0 0x10060000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		sgmiisys1: syscon at 10070000 {
> +			compatible = "mediatek,mt7986-sgmiisys_1",
> +				     "syscon";
> +			reg = <0 0x10070000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
>   		trng: trng at 1020f000 {
>   			compatible = "mediatek,mt7986-rng",
>   				     "mediatek,mt7623-rng";
>   			reg = <0 0x1020f000 0 0x100>;
> -			clocks = <&system_clk>;
> +			clocks = <&infracfg CLK_INFRA_TRNG_CK>;
>   			clock-names = "rng";
>   			status = "disabled";
>   		};
> @@ -142,7 +176,13 @@ uart0: serial at 11002000 {
>   				     "mediatek,mt6577-uart";
>   			reg = <0 0x11002000 0 0x400>;
>   			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&system_clk>;
> +			clocks = <&infracfg CLK_INFRA_UART0_SEL>,
> +				 <&infracfg CLK_INFRA_UART0_CK>;
> +			clock-names = "baud", "bus";
> +			assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
> +					  <&infracfg CLK_INFRA_UART0_SEL>;
> +			assigned-clock-parents = <&topckgen CLK_TOP_XTAL>,
> +						 <&topckgen CLK_TOP_UART_SEL>;
>   			status = "disabled";
>   		};
>   
> @@ -151,7 +191,11 @@ uart1: serial at 11003000 {
>   				     "mediatek,mt6577-uart";
>   			reg = <0 0x11003000 0 0x400>;
>   			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&system_clk>;
> +			clocks = <&infracfg CLK_INFRA_UART1_SEL>,
> +				 <&infracfg CLK_INFRA_UART1_CK>;
> +			clock-names = "baud", "bus";
> +			assigned-clocks = <&infracfg CLK_INFRA_UART1_SEL>;
> +			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
>   			status = "disabled";
>   		};
>   
> @@ -160,10 +204,24 @@ uart2: serial at 11004000 {
>   				     "mediatek,mt6577-uart";
>   			reg = <0 0x11004000 0 0x400>;
>   			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&system_clk>;
> +			clocks = <&infracfg CLK_INFRA_UART2_SEL>,
> +				 <&infracfg CLK_INFRA_UART2_CK>;
> +			clock-names = "baud", "bus";
> +			assigned-clocks = <&infracfg CLK_INFRA_UART2_SEL>;
> +			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
>   			status = "disabled";
>   		};
>   
> +		ethsys: syscon at 15000000 {
> +			 #address-cells = <1>;
> +			 #size-cells = <1>;
> +			 compatible = "mediatek,mt7986-ethsys",
> +				      "syscon";
> +			 reg = <0 0x15000000 0 0x1000>;
> +			 #clock-cells = <1>;
> +			 #reset-cells = <1>;
> +		};
> +
>   	};
>   
>   };