[PATCH v3 4/7] iommu/mediatek: Add error path for loop of mm_dts_parse

Yong Wu yong.wu at mediatek.com
Thu Jun 30 22:39:39 PDT 2022


The mtk_iommu_mm_dts_parse will parse the smi larbs nodes. if the i+1
larb is parsed fail, we should put_device for the 0..i larbs.

There are two places need to comment:
1) The larbid may be not linear mapping, we should loop whole
   the array in the error path.
2) I move this line position: "data->larb_imu[id].dev = &plarbdev->dev;"
   That means set data->larb_imu[id].dev before the error path.
   then we don't need "platform_device_put(plarbdev)" again while
   probe_defer case. All depend on "put_device" in the error path in error
   cases.

Fixes: d2e9a1102cfc ("iommu/mediatek: Contain MM IOMMU flow with the MM TYPE")
Signed-off-by: Yong Wu <yong.wu at mediatek.com>
---
 drivers/iommu/mtk_iommu.c | 42 ++++++++++++++++++++++++++++-----------
 1 file changed, 30 insertions(+), 12 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 3da8c6252c2c..aa0973bafde1 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -1057,8 +1057,10 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **m
 		u32 id;
 
 		larbnode = of_parse_phandle(dev->of_node, "mediatek,larbs", i);
-		if (!larbnode)
-			return -EINVAL;
+		if (!larbnode) {
+			ret = -EINVAL;
+			goto err_larbdev_put;
+		}
 
 		if (!of_device_is_available(larbnode)) {
 			of_node_put(larbnode);
@@ -1071,14 +1073,16 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **m
 
 		plarbdev = of_find_device_by_node(larbnode);
 		of_node_put(larbnode);
-		if (!plarbdev)
-			return -ENODEV;
+		if (!plarbdev) {
+			ret = -ENODEV;
+			goto err_larbdev_put;
+		}
+		data->larb_imu[id].dev = &plarbdev->dev;
 
 		if (!plarbdev->dev.driver) {
-			platform_device_put(plarbdev);
-			return -EPROBE_DEFER;
+			ret = -EPROBE_DEFER;
+			goto err_larbdev_put;
 		}
-		data->larb_imu[id].dev = &plarbdev->dev;
 
 		component_match_add(dev, match, component_compare_dev, &plarbdev->dev);
 		platform_device_put(plarbdev);
@@ -1086,8 +1090,10 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **m
 
 	/* Get smi-(sub)-common dev from the last larb. */
 	smi_subcomm_node = of_parse_phandle(larbnode, "mediatek,smi", 0);
-	if (!smi_subcomm_node)
-		return -EINVAL;
+	if (!smi_subcomm_node) {
+		ret = -EINVAL;
+		goto err_larbdev_put;
+	}
 
 	/*
 	 * It may have two level smi-common. the node is smi-sub-common if it
@@ -1101,8 +1107,10 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **m
 
 	pcommdev = of_find_device_by_node(smicomm_node);
 	of_node_put(smicomm_node);
-	if (!pcommdev)
-		return -EINVAL;
+	if (!pcommdev) {
+		ret = -EINVAL;
+		goto err_larbdev_put;
+	}
 	data->smicomm_dev = &pcommdev->dev;
 
 	link = device_link_add(data->smicomm_dev, dev,
@@ -1110,9 +1118,19 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **m
 	platform_device_put(pcommdev);
 	if (!link) {
 		dev_err(dev, "Unable to link %s.\n", dev_name(data->smicomm_dev));
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err_larbdev_put;
 	}
 	return 0;
+
+err_larbdev_put:
+	/* id may be not linear mapping, loop whole the array */
+	for (i = 0; i < MTK_LARB_NR_MAX; i++) {
+		if (!data->larb_imu[i].dev)
+			continue;
+		put_device(data->larb_imu[i].dev);
+	}
+	return ret;
 }
 
 static int mtk_iommu_probe(struct platform_device *pdev)
-- 
2.18.0




More information about the linux-arm-kernel mailing list