[PATCH v12 2/2] iommu/mediatek: Allow page table PA up to 35bit

Robin Murphy robin.murphy at arm.com
Thu Jun 30 08:27:08 PDT 2022


On 2022-06-30 10:29, yf.wang at mediatek.com wrote:
> From: Yunfei Wang <yf.wang at mediatek.com>
> 
> Single memory zone feature will remove ZONE_DMA32 and ZONE_DMA. So add
> the quirk IO_PGTABLE_QUIRK_ARM_MTK_TTBR_EXT to let level 1 and level 2
> pgtable support at most 35bit PA.

FWIW,

Reviewed-by: Robin Murphy <robin.murphy at arm.com>

> Signed-off-by: Ning Li <ning.li at mediatek.com>
> Signed-off-by: Yunfei Wang <yf.wang at mediatek.com>
> ---
>   drivers/iommu/mtk_iommu.c | 13 +++++++------
>   1 file changed, 7 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index bb9dd92c9898..3b9f4bdb15b7 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -34,7 +34,6 @@
>   #include <dt-bindings/memory/mtk-memory-port.h>
>   
>   #define REG_MMU_PT_BASE_ADDR			0x000
> -#define MMU_PT_ADDR_MASK			GENMASK(31, 7)
>   
>   #define REG_MMU_INVALIDATE			0x020
>   #define F_ALL_INVLD				0x2
> @@ -138,6 +137,7 @@
>   /* PM and clock always on. e.g. infra iommu */
>   #define PM_CLK_AO			BIT(15)
>   #define IFA_IOMMU_PCIE_SUPPORT		BIT(16)
> +#define PGTABLE_PA_35_EN		BIT(17)
>   
>   #define MTK_IOMMU_HAS_FLAG_MASK(pdata, _x, mask)	\
>   				((((pdata)->flags) & (mask)) == (_x))
> @@ -596,6 +596,9 @@ static int mtk_iommu_domain_finalise(struct mtk_iommu_domain *dom,
>   		.iommu_dev = data->dev,
>   	};
>   
> +	if (MTK_IOMMU_HAS_FLAG(data->plat_data, PGTABLE_PA_35_EN))
> +		dom->cfg.quirks |= IO_PGTABLE_QUIRK_ARM_MTK_TTBR_EXT;
> +
>   	if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_4GB_MODE))
>   		dom->cfg.oas = data->enable_4GB ? 33 : 32;
>   	else
> @@ -684,8 +687,7 @@ static int mtk_iommu_attach_device(struct iommu_domain *domain,
>   			goto err_unlock;
>   		}
>   		bank->m4u_dom = dom;
> -		writel(dom->cfg.arm_v7s_cfg.ttbr & MMU_PT_ADDR_MASK,
> -		       bank->base + REG_MMU_PT_BASE_ADDR);
> +		writel(dom->cfg.arm_v7s_cfg.ttbr, bank->base + REG_MMU_PT_BASE_ADDR);
>   
>   		pm_runtime_put(m4udev);
>   	}
> @@ -1366,8 +1368,7 @@ static int __maybe_unused mtk_iommu_runtime_resume(struct device *dev)
>   		writel_relaxed(reg->int_control[i], base + REG_MMU_INT_CONTROL0);
>   		writel_relaxed(reg->int_main_control[i], base + REG_MMU_INT_MAIN_CONTROL);
>   		writel_relaxed(reg->ivrp_paddr[i], base + REG_MMU_IVRP_PADDR);
> -		writel(m4u_dom->cfg.arm_v7s_cfg.ttbr & MMU_PT_ADDR_MASK,
> -		       base + REG_MMU_PT_BASE_ADDR);
> +		writel(m4u_dom->cfg.arm_v7s_cfg.ttbr, base + REG_MMU_PT_BASE_ADDR);
>   	} while (++i < data->plat_data->banks_num);
>   
>   	/*
> @@ -1401,7 +1402,7 @@ static const struct mtk_iommu_plat_data mt2712_data = {
>   static const struct mtk_iommu_plat_data mt6779_data = {
>   	.m4u_plat      = M4U_MT6779,
>   	.flags         = HAS_SUB_COMM_2BITS | OUT_ORDER_WR_EN | WR_THROT_EN |
> -			 MTK_IOMMU_TYPE_MM,
> +			 MTK_IOMMU_TYPE_MM | PGTABLE_PA_35_EN,
>   	.inv_sel_reg   = REG_MMU_INV_SEL_GEN2,
>   	.banks_num    = 1,
>   	.banks_enable = {true},



More information about the linux-arm-kernel mailing list