[PATCH v6 09/14] dt-bindings: firmware: Add fsl,scu yaml file

[Rob Herring]

On Wed, 29 Jun 2022 19:44:09 +0300, Viorel Suman (OSS) wrote:
> From: Abel Vesa <abel.vesa at nxp.com>
> 
> In order to replace the fsl,scu txt file from bindings/arm/freescale,
> we need to split it between the right subsystems. This patch adds the
> fsl,scu.yaml in the firmware bindings folder. This one is only for
> the main SCU node. The old txt file will be removed only after all
> the child nodes have been properly switch to yaml.
> 
> Signed-off-by: Abel Vesa <abel.vesa at nxp.com>
> Signed-off-by: Viorel Suman <viorel.suman at nxp.com>
> ---
>  .../devicetree/bindings/firmware/fsl,scu.yaml | 160 ++++++++++++++++++
>  1 file changed, 160 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/firmware/fsl,scu.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/firmware/fsl,scu.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/clock/fsl,scu-clk.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/firmware/fsl,scu.example.dtb: system-controller: clock-controller: False schema does not allow {'compatible': ['fsl,imx8qxp-clk', 'fsl,scu-clk'], '#clock-cells': [[2]]}
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/firmware/fsl,scu.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/firmware/fsl,scu.example.dtb: system-controller: pinctrl: False schema does not allow {'compatible': ['fsl,imx8qxp-iomuxc'], 'lpuart0grp': {'fsl,pins': [[111, 0, 100663328, 112, 0, 100663328]]}}
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/firmware/fsl,scu.yaml
Documentation/devicetree/bindings/firmware/fsl,scu.example.dtb:0:0: /example-0/firmware/system-controller/clock-controller: failed to match any schema with compatible: ['fsl,imx8qxp-clk', 'fsl,scu-clk']
Documentation/devicetree/bindings/firmware/fsl,scu.example.dtb:0:0: /example-0/firmware/system-controller/clock-controller: failed to match any schema with compatible: ['fsl,imx8qxp-clk', 'fsl,scu-clk']
Documentation/devicetree/bindings/firmware/fsl,scu.example.dtb:0:0: /example-0/firmware/system-controller/pinctrl: failed to match any schema with compatible: ['fsl,imx8qxp-iomuxc']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.