[PATCH] dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema
Chanwoo Choi
cwchoi00 at gmail.com
Wed Jun 29 12:39:08 PDT 2022
On 22. 6. 26. 21:52, Krzysztof Kozlowski wrote:
> Convert the Samsung Exynos SoC Bus and Interconnect bindings to DT
> schema.
>
> Vast parts of descritpion and example were copied, so keep license as
> GPL-2.0-only.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> ---
> .../bindings/devfreq/exynos-bus.txt | 488 ------------------
> .../interconnect/samsung,exynos-bus.yaml | 290 +++++++++++
> MAINTAINERS | 2 +-
> 3 files changed, 291 insertions(+), 489 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/devfreq/exynos-bus.txt
> create mode 100644 Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml
>
> diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
> deleted file mode 100644
> index bcaa2c08ac11..000000000000
> --- a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
> +++ /dev/null
> @@ -1,488 +0,0 @@
> -* Generic Exynos Bus frequency device
> -
> -The Samsung Exynos SoC has many buses for data transfer between DRAM
> -and sub-blocks in SoC. Most Exynos SoCs share the common architecture
> -for buses. Generally, each bus of Exynos SoC includes a source clock
> -and a power line, which are able to change the clock frequency
> -of the bus in runtime. To monitor the usage of each bus in runtime,
> -the driver uses the PPMU (Platform Performance Monitoring Unit), which
> -is able to measure the current load of sub-blocks.
> -
> -The Exynos SoC includes the various sub-blocks which have the each AXI bus.
> -The each AXI bus has the owned source clock but, has not the only owned
> -power line. The power line might be shared among one more sub-blocks.
> -So, we can divide into two type of device as the role of each sub-block.
> -There are two type of bus devices as following:
> -- parent bus device
> -- passive bus device
> -
> -Basically, parent and passive bus device share the same power line.
> -The parent bus device can only change the voltage of shared power line
> -and the rest bus devices (passive bus device) depend on the decision of
> -the parent bus device. If there are three blocks which share the VDD_xxx
> -power line, Only one block should be parent device and then the rest blocks
> -should depend on the parent device as passive device.
> -
> - VDD_xxx |--- A block (parent)
> - |--- B block (passive)
> - |--- C block (passive)
> -
> -There are a little different composition among Exynos SoC because each Exynos
> -SoC has different sub-blocks. Therefore, such difference should be specified
> -in devicetree file instead of each device driver. In result, this driver
> -is able to support the bus frequency for all Exynos SoCs.
> -
> -Required properties for all bus devices:
> -- compatible: Should be "samsung,exynos-bus".
> -- clock-names : the name of clock used by the bus, "bus".
> -- clocks : phandles for clock specified in "clock-names" property.
> -- operating-points-v2: the OPP table including frequency/voltage information
> - to support DVFS (Dynamic Voltage/Frequency Scaling) feature.
> -
> -Required properties only for parent bus device:
> -- vdd-supply: the regulator to provide the buses with the voltage.
> -- devfreq-events: the devfreq-event device to monitor the current utilization
> - of buses.
> -
> -Required properties only for passive bus device:
> -- devfreq: the parent bus device.
> -
> -Optional properties only for parent bus device:
> -- exynos,saturation-ratio: the percentage value which is used to calibrate
> - the performance count against total cycle count.
> -
> -Optional properties for the interconnect functionality (QoS frequency
> -constraints):
> -- #interconnect-cells: should be 0.
> -- interconnects: as documented in ../interconnect.txt, describes a path at the
> - higher level interconnects used by this interconnect provider.
> - If this interconnect provider is directly linked to a top level interconnect
> - provider the property contains only one phandle. The provider extends
> - the interconnect graph by linking its node to a node registered by provider
> - pointed to by first phandle in the 'interconnects' property.
> -
> -- samsung,data-clock-ratio: ratio of the data throughput in B/s to minimum data
> - clock frequency in Hz, default value is 8 when this property is missing.
> -
> -Detailed correlation between sub-blocks and power line according to Exynos SoC:
> -- In case of Exynos3250, there are two power line as following:
> - VDD_MIF |--- DMC
> -
> - VDD_INT |--- LEFTBUS (parent device)
> - |--- PERIL
> - |--- MFC
> - |--- G3D
> - |--- RIGHTBUS
> - |--- PERIR
> - |--- FSYS
> - |--- LCD0
> - |--- PERIR
> - |--- ISP
> - |--- CAM
> -
> -- In case of Exynos4210, there is one power line as following:
> - VDD_INT |--- DMC (parent device)
> - |--- LEFTBUS
> - |--- PERIL
> - |--- MFC(L)
> - |--- G3D
> - |--- TV
> - |--- LCD0
> - |--- RIGHTBUS
> - |--- PERIR
> - |--- MFC(R)
> - |--- CAM
> - |--- FSYS
> - |--- GPS
> - |--- LCD0
> - |--- LCD1
> -
> -- In case of Exynos4x12, there are two power line as following:
> - VDD_MIF |--- DMC
> -
> - VDD_INT |--- LEFTBUS (parent device)
> - |--- PERIL
> - |--- MFC(L)
> - |--- G3D
> - |--- TV
> - |--- IMAGE
> - |--- RIGHTBUS
> - |--- PERIR
> - |--- MFC(R)
> - |--- CAM
> - |--- FSYS
> - |--- GPS
> - |--- LCD0
> - |--- ISP
> -
> -- In case of Exynos5422, there are two power line as following:
> - VDD_MIF |--- DREX 0 (parent device, DRAM EXpress controller)
> - |--- DREX 1
> -
> - VDD_INT |--- NoC_Core (parent device)
> - |--- G2D
> - |--- G3D
> - |--- DISP1
> - |--- NoC_WCORE
> - |--- GSCL
> - |--- MSCL
> - |--- ISP
> - |--- MFC
> - |--- GEN
> - |--- PERIS
> - |--- PERIC
> - |--- FSYS
> - |--- FSYS2
> -
> -- In case of Exynos5433, there is VDD_INT power line as following:
> - VDD_INT |--- G2D (parent device)
> - |--- MSCL
> - |--- GSCL
> - |--- JPEG
> - |--- MFC
> - |--- HEVC
> - |--- BUS0
> - |--- BUS1
> - |--- BUS2
> - |--- PERIS (Fixed clock rate)
> - |--- PERIC (Fixed clock rate)
> - |--- FSYS (Fixed clock rate)
> -
> -Example 1:
> - Show the AXI buses of Exynos3250 SoC. Exynos3250 divides the buses to
> - power line (regulator). The MIF (Memory Interface) AXI bus is used to
> - transfer data between DRAM and CPU and uses the VDD_MIF regulator.
> -
> - - MIF (Memory Interface) block
> - : VDD_MIF |--- DMC (Dynamic Memory Controller)
> -
> - - INT (Internal) block
> - : VDD_INT |--- LEFTBUS (parent device)
> - |--- PERIL
> - |--- MFC
> - |--- G3D
> - |--- RIGHTBUS
> - |--- FSYS
> - |--- LCD0
> - |--- PERIR
> - |--- ISP
> - |--- CAM
> -
> - - MIF bus's frequency/voltage table
> - -----------------------
> - |Lv| Freq | Voltage |
> - -----------------------
> - |L1| 50000 |800000 |
> - |L2| 100000 |800000 |
> - |L3| 134000 |800000 |
> - |L4| 200000 |825000 |
> - |L5| 400000 |875000 |
> - -----------------------
> -
> - - INT bus's frequency/voltage table
> - ----------------------------------------------------------
> - |Block|LEFTBUS|RIGHTBUS|MCUISP |ISP |PERIL ||VDD_INT |
> - | name| |LCD0 | | | || |
> - | | |FSYS | | | || |
> - | | |MFC | | | || |
> - ----------------------------------------------------------
> - |Mode |*parent|passive |passive|passive|passive|| |
> - ----------------------------------------------------------
> - |Lv |Frequency ||Voltage |
> - ----------------------------------------------------------
> - |L1 |50000 |50000 |50000 |50000 |50000 ||900000 |
> - |L2 |80000 |80000 |80000 |80000 |80000 ||900000 |
> - |L3 |100000 |100000 |100000 |100000 |100000 ||1000000 |
> - |L4 |134000 |134000 |200000 |200000 | ||1000000 |
> - |L5 |200000 |200000 |400000 |300000 | ||1000000 |
> - ----------------------------------------------------------
> -
> -Example 2:
> - The bus of DMC (Dynamic Memory Controller) block in exynos3250.dtsi
> - is listed below:
> -
> - bus_dmc: bus_dmc {
> - compatible = "samsung,exynos-bus";
> - clocks = <&cmu_dmc CLK_DIV_DMC>;
> - clock-names = "bus";
> - operating-points-v2 = <&bus_dmc_opp_table>;
> - status = "disabled";
> - };
> -
> - bus_dmc_opp_table: opp_table1 {
> - compatible = "operating-points-v2";
> - opp-shared;
> -
> - opp-50000000 {
> - opp-hz = /bits/ 64 <50000000>;
> - opp-microvolt = <800000>;
> - };
> - opp-100000000 {
> - opp-hz = /bits/ 64 <100000000>;
> - opp-microvolt = <800000>;
> - };
> - opp-134000000 {
> - opp-hz = /bits/ 64 <134000000>;
> - opp-microvolt = <800000>;
> - };
> - opp-200000000 {
> - opp-hz = /bits/ 64 <200000000>;
> - opp-microvolt = <825000>;
> - };
> - opp-400000000 {
> - opp-hz = /bits/ 64 <400000000>;
> - opp-microvolt = <875000>;
> - };
> - };
> -
> - bus_leftbus: bus_leftbus {
> - compatible = "samsung,exynos-bus";
> - clocks = <&cmu CLK_DIV_GDL>;
> - clock-names = "bus";
> - operating-points-v2 = <&bus_leftbus_opp_table>;
> - status = "disabled";
> - };
> -
> - bus_rightbus: bus_rightbus {
> - compatible = "samsung,exynos-bus";
> - clocks = <&cmu CLK_DIV_GDR>;
> - clock-names = "bus";
> - operating-points-v2 = <&bus_leftbus_opp_table>;
> - status = "disabled";
> - };
> -
> - bus_lcd0: bus_lcd0 {
> - compatible = "samsung,exynos-bus";
> - clocks = <&cmu CLK_DIV_ACLK_160>;
> - clock-names = "bus";
> - operating-points-v2 = <&bus_leftbus_opp_table>;
> - status = "disabled";
> - };
> -
> - bus_fsys: bus_fsys {
> - compatible = "samsung,exynos-bus";
> - clocks = <&cmu CLK_DIV_ACLK_200>;
> - clock-names = "bus";
> - operating-points-v2 = <&bus_leftbus_opp_table>;
> - status = "disabled";
> - };
> -
> - bus_mcuisp: bus_mcuisp {
> - compatible = "samsung,exynos-bus";
> - clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>;
> - clock-names = "bus";
> - operating-points-v2 = <&bus_mcuisp_opp_table>;
> - status = "disabled";
> - };
> -
> - bus_isp: bus_isp {
> - compatible = "samsung,exynos-bus";
> - clocks = <&cmu CLK_DIV_ACLK_266>;
> - clock-names = "bus";
> - operating-points-v2 = <&bus_isp_opp_table>;
> - status = "disabled";
> - };
> -
> - bus_peril: bus_peril {
> - compatible = "samsung,exynos-bus";
> - clocks = <&cmu CLK_DIV_ACLK_100>;
> - clock-names = "bus";
> - operating-points-v2 = <&bus_peril_opp_table>;
> - status = "disabled";
> - };
> -
> - bus_mfc: bus_mfc {
> - compatible = "samsung,exynos-bus";
> - clocks = <&cmu CLK_SCLK_MFC>;
> - clock-names = "bus";
> - operating-points-v2 = <&bus_leftbus_opp_table>;
> - status = "disabled";
> - };
> -
> - bus_leftbus_opp_table: opp_table1 {
> - compatible = "operating-points-v2";
> - opp-shared;
> -
> - opp-50000000 {
> - opp-hz = /bits/ 64 <50000000>;
> - opp-microvolt = <900000>;
> - };
> - opp-80000000 {
> - opp-hz = /bits/ 64 <80000000>;
> - opp-microvolt = <900000>;
> - };
> - opp-100000000 {
> - opp-hz = /bits/ 64 <100000000>;
> - opp-microvolt = <1000000>;
> - };
> - opp-134000000 {
> - opp-hz = /bits/ 64 <134000000>;
> - opp-microvolt = <1000000>;
> - };
> - opp-200000000 {
> - opp-hz = /bits/ 64 <200000000>;
> - opp-microvolt = <1000000>;
> - };
> - };
> -
> - bus_mcuisp_opp_table: opp_table2 {
> - compatible = "operating-points-v2";
> - opp-shared;
> -
> - opp-50000000 {
> - opp-hz = /bits/ 64 <50000000>;
> - };
> - opp-80000000 {
> - opp-hz = /bits/ 64 <80000000>;
> - };
> - opp-100000000 {
> - opp-hz = /bits/ 64 <100000000>;
> - };
> - opp-200000000 {
> - opp-hz = /bits/ 64 <200000000>;
> - };
> - opp-400000000 {
> - opp-hz = /bits/ 64 <400000000>;
> - };
> - };
> -
> - bus_isp_opp_table: opp_table3 {
> - compatible = "operating-points-v2";
> - opp-shared;
> -
> - opp-50000000 {
> - opp-hz = /bits/ 64 <50000000>;
> - };
> - opp-80000000 {
> - opp-hz = /bits/ 64 <80000000>;
> - };
> - opp-100000000 {
> - opp-hz = /bits/ 64 <100000000>;
> - };
> - opp-200000000 {
> - opp-hz = /bits/ 64 <200000000>;
> - };
> - opp-300000000 {
> - opp-hz = /bits/ 64 <300000000>;
> - };
> - };
> -
> - bus_peril_opp_table: opp_table4 {
> - compatible = "operating-points-v2";
> - opp-shared;
> -
> - opp-50000000 {
> - opp-hz = /bits/ 64 <50000000>;
> - };
> - opp-80000000 {
> - opp-hz = /bits/ 64 <80000000>;
> - };
> - opp-100000000 {
> - opp-hz = /bits/ 64 <100000000>;
> - };
> - };
> -
> -
> - Usage case to handle the frequency and voltage of bus on runtime
> - in exynos3250-rinato.dts is listed below:
> -
> - &bus_dmc {
> - devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
> - vdd-supply = <&buck1_reg>; /* VDD_MIF */
> - status = "okay";
> - };
> -
> - &bus_leftbus {
> - devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
> - vdd-supply = <&buck3_reg>;
> - status = "okay";
> - };
> -
> - &bus_rightbus {
> - devfreq = <&bus_leftbus>;
> - status = "okay";
> - };
> -
> - &bus_lcd0 {
> - devfreq = <&bus_leftbus>;
> - status = "okay";
> - };
> -
> - &bus_fsys {
> - devfreq = <&bus_leftbus>;
> - status = "okay";
> - };
> -
> - &bus_mcuisp {
> - devfreq = <&bus_leftbus>;
> - status = "okay";
> - };
> -
> - &bus_isp {
> - devfreq = <&bus_leftbus>;
> - status = "okay";
> - };
> -
> - &bus_peril {
> - devfreq = <&bus_leftbus>;
> - status = "okay";
> - };
> -
> - &bus_mfc {
> - devfreq = <&bus_leftbus>;
> - status = "okay";
> - };
> -
> -Example 3:
> - An interconnect path "bus_display -- bus_leftbus -- bus_dmc" on
> - Exynos4412 SoC with video mixer as an interconnect consumer device.
> -
> - soc {
> - bus_dmc: bus_dmc {
> - compatible = "samsung,exynos-bus";
> - clocks = <&clock CLK_DIV_DMC>;
> - clock-names = "bus";
> - operating-points-v2 = <&bus_dmc_opp_table>;
> - samsung,data-clock-ratio = <4>;
> - #interconnect-cells = <0>;
> - };
> -
> - bus_leftbus: bus_leftbus {
> - compatible = "samsung,exynos-bus";
> - clocks = <&clock CLK_DIV_GDL>;
> - clock-names = "bus";
> - operating-points-v2 = <&bus_leftbus_opp_table>;
> - #interconnect-cells = <0>;
> - interconnects = <&bus_dmc>;
> - };
> -
> - bus_display: bus_display {
> - compatible = "samsung,exynos-bus";
> - clocks = <&clock CLK_ACLK160>;
> - clock-names = "bus";
> - operating-points-v2 = <&bus_display_opp_table>;
> - #interconnect-cells = <0>;
> - interconnects = <&bus_leftbus &bus_dmc>;
> - };
> -
> - bus_dmc_opp_table: opp_table1 {
> - compatible = "operating-points-v2";
> - /* ... */
> - }
> -
> - bus_leftbus_opp_table: opp_table3 {
> - compatible = "operating-points-v2";
> - /* ... */
> - };
> -
> - bus_display_opp_table: opp_table4 {
> - compatible = "operating-points-v2";
> - /* .. */
> - };
> -
> - &mixer {
> - compatible = "samsung,exynos4212-mixer";
> - interconnects = <&bus_display &bus_dmc>;
> - /* ... */
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml b/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml
> new file mode 100644
> index 000000000000..ad9ed596dfef
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml
> @@ -0,0 +1,290 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interconnect/samsung,exynos-bus.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung Exynos SoC Bus and Interconnect
> +
> +maintainers:
> + - Chanwoo Choi <cw00.choi at samsung.com>
> + - Krzysztof Kozlowski <krzk at kernel.org>
> +
> +description: |
> + The Samsung Exynos SoC has many buses for data transfer between DRAM and
> + sub-blocks in SoC. Most Exynos SoCs share the common architecture for buses.
> + Generally, each bus of Exynos SoC includes a source clock and a power line,
> + which are able to change the clock frequency of the bus in runtime. To
> + monitor the usage of each bus in runtime, the driver uses the PPMU (Platform
> + Performance Monitoring Unit), which is able to measure the current load of
> + sub-blocks.
> +
> + The Exynos SoC includes the various sub-blocks which have the each AXI bus.
> + The each AXI bus has the owned source clock but, has not the only owned power
> + line. The power line might be shared among one more sub-blocks. So, we can
> + divide into two type of device as the role of each sub-block. There are two
> + type of bus devices as following::
> + - parent bus device
> + - passive bus device
> +
> + Basically, parent and passive bus device share the same power line. The
> + parent bus device can only change the voltage of shared power line and the
> + rest bus devices (passive bus device) depend on the decision of the parent
> + bus device. If there are three blocks which share the VDD_xxx power line,
> + Only one block should be parent device and then the rest blocks should depend
> + on the parent device as passive device.
> +
> + VDD_xxx |--- A block (parent)
> + |--- B block (passive)
> + |--- C block (passive)
> +
> + There are a little different composition among Exynos SoC because each Exynos
> + SoC has different sub-blocks. Therefore, such difference should be specified
> + in devicetree file instead of each device driver. In result, this driver is
> + able to support the bus frequency for all Exynos SoCs.
> +
> + Detailed correlation between sub-blocks and power line according
> + to Exynos SoC::
> + - In case of Exynos3250, there are two power line as following::
> + VDD_MIF |--- DMC (Dynamic Memory Controller)
> +
> + VDD_INT |--- LEFTBUS (parent device)
> + |--- PERIL
> + |--- MFC
> + |--- G3D
> + |--- RIGHTBUS
> + |--- PERIR
> + |--- FSYS
> + |--- LCD0
> + |--- PERIR
> + |--- ISP
> + |--- CAM
> +
> + - MIF bus's frequency/voltage table
> + -----------------------
> + |Lv| Freq | Voltage |
> + -----------------------
> + |L1| 50000 |800000 |
> + |L2| 100000 |800000 |
> + |L3| 134000 |800000 |
> + |L4| 200000 |825000 |
> + |L5| 400000 |875000 |
> + -----------------------
> +
> + - INT bus's frequency/voltage table
> + ----------------------------------------------------------
> + |Block|LEFTBUS|RIGHTBUS|MCUISP |ISP |PERIL ||VDD_INT |
> + | name| |LCD0 | | | || |
> + | | |FSYS | | | || |
> + | | |MFC | | | || |
> + ----------------------------------------------------------
> + |Mode |*parent|passive |passive|passive|passive|| |
> + ----------------------------------------------------------
> + |Lv |Frequency ||Voltage |
> + ----------------------------------------------------------
> + |L1 |50000 |50000 |50000 |50000 |50000 ||900000 |
> + |L2 |80000 |80000 |80000 |80000 |80000 ||900000 |
> + |L3 |100000 |100000 |100000 |100000 |100000 ||1000000 |
> + |L4 |134000 |134000 |200000 |200000 | ||1000000 |
> + |L5 |200000 |200000 |400000 |300000 | ||1000000 |
> + ----------------------------------------------------------
> +
> + - In case of Exynos4210, there is one power line as following::
> + VDD_INT |--- DMC (parent device, Dynamic Memory Controller)
> + |--- LEFTBUS
> + |--- PERIL
> + |--- MFC(L)
> + |--- G3D
> + |--- TV
> + |--- LCD0
> + |--- RIGHTBUS
> + |--- PERIR
> + |--- MFC(R)
> + |--- CAM
> + |--- FSYS
> + |--- GPS
> + |--- LCD0
> + |--- LCD1
> +
> + - In case of Exynos4x12, there are two power line as following::
> + VDD_MIF |--- DMC (Dynamic Memory Controller)
> +
> + VDD_INT |--- LEFTBUS (parent device)
> + |--- PERIL
> + |--- MFC(L)
> + |--- G3D
> + |--- TV
> + |--- IMAGE
> + |--- RIGHTBUS
> + |--- PERIR
> + |--- MFC(R)
> + |--- CAM
> + |--- FSYS
> + |--- GPS
> + |--- LCD0
> + |--- ISP
> +
> + - In case of Exynos5422, there are two power line as following::
> + VDD_MIF |--- DREX 0 (parent device, DRAM EXpress controller)
> + |--- DREX 1
> +
> + VDD_INT |--- NoC_Core (parent device)
> + |--- G2D
> + |--- G3D
> + |--- DISP1
> + |--- NoC_WCORE
> + |--- GSCL
> + |--- MSCL
> + |--- ISP
> + |--- MFC
> + |--- GEN
> + |--- PERIS
> + |--- PERIC
> + |--- FSYS
> + |--- FSYS2
> +
> + - In case of Exynos5433, there is VDD_INT power line as following::
> + VDD_INT |--- G2D (parent device)
> + |--- MSCL
> + |--- GSCL
> + |--- JPEG
> + |--- MFC
> + |--- HEVC
> + |--- BUS0
> + |--- BUS1
> + |--- BUS2
> + |--- PERIS (Fixed clock rate)
> + |--- PERIC (Fixed clock rate)
> + |--- FSYS (Fixed clock rate)
> +
> +properties:
> + compatible:
> + enum:
> + - samsung,exynos-bus
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + items:
> + - const: bus
> +
> + devfreq:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + Parent bus device. Valid and required only for the passive bus devices.
> +
> + devfreq-events:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + minItems: 1
> + maxItems: 4
> + description:
> + Devfreq-event device to monitor the current utilization of buses. Valid
> + and required only for the parent bus devices.
> +
> + exynos,saturation-ratio:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Percentage value which is used to calibrate the performance count against
> + total cycle count. Valid only for the parent bus devices.
> +
> + '#interconnect-cells':
> + const: 0
> +
> + interconnects:
> + minItems: 1
> + maxItems: 2
> +
> + operating-points-v2: true
> +
> + samsung,data-clock-ratio:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + default: 8
> + description:
> + Ratio of the data throughput in B/s to minimum data clock frequency in
> + Hz.
> +
> + vdd-supply:
> + description:
> + Main bus power rail. Valid and required only for the parent bus devices.
> +
> +required:
> + - compatible
> + - clocks
> + - clock-names
> + - operating-points-v2
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/exynos3250.h>
> +
> + bus-dmc {
> + compatible = "samsung,exynos-bus";
> + clocks = <&cmu_dmc CLK_DIV_DMC>;
> + clock-names = "bus";
> + operating-points-v2 = <&bus_dmc_opp_table>;
> + devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
> + vdd-supply = <&buck1_reg>;
> + };
> +
> + ppmu_dmc0: ppmu at 106a0000 {
> + compatible = "samsung,exynos-ppmu";
> + reg = <0x106a0000 0x2000>;
> + events {
> + ppmu_dmc0_3: ppmu-event3-dmc0 {
> + event-name = "ppmu-event3-dmc0";
> + };
> + };
> + };
> +
> + bus_leftbus: bus-leftbus {
> + compatible = "samsung,exynos-bus";
> + clocks = <&cmu CLK_DIV_GDL>;
> + clock-names = "bus";
> + operating-points-v2 = <&bus_leftbus_opp_table>;
> + devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
> + vdd-supply = <&buck3_reg>;
> + };
> +
> + bus-rightbus {
> + compatible = "samsung,exynos-bus";
> + clocks = <&cmu CLK_DIV_GDR>;
> + clock-names = "bus";
> + operating-points-v2 = <&bus_leftbus_opp_table>;
> + devfreq = <&bus_leftbus>;
> + };
> +
> + - |
> + dmc: bus-dmc {
> + compatible = "samsung,exynos-bus";
> + clocks = <&clock CLK_DIV_DMC>;
> + clock-names = "bus";
> + operating-points-v2 = <&bus_dmc_opp_table>;
> + samsung,data-clock-ratio = <4>;
> + #interconnect-cells = <0>;
> + devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
> + vdd-supply = <&buck1_reg>;
> + };
> +
> + leftbus: bus-leftbus {
> + compatible = "samsung,exynos-bus";
> + clocks = <&clock CLK_DIV_GDL>;
> + clock-names = "bus";
> + operating-points-v2 = <&bus_leftbus_opp_table>;
> + interconnects = <&dmc>;
> + #interconnect-cells = <0>;
> + devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
> + vdd-supply = <&buck3_reg>;
> + };
> +
> + display: bus-display {
> + compatible = "samsung,exynos-bus";
> + clocks = <&clock CLK_DIV_ACLK_266>;
> + clock-names = "bus";
> + operating-points-v2 = <&bus_display_opp_table>;
> + interconnects = <&leftbus &dmc>;
> + #interconnect-cells = <0>;
> + devfreq = <&leftbus>;
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 7c9187635801..19875f60ebb1 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -4328,7 +4328,7 @@ L: linux-pm at vger.kernel.org
> L: linux-samsung-soc at vger.kernel.org
> S: Maintained
> T: git git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux.git
> -F: Documentation/devicetree/bindings/devfreq/exynos-bus.txt
> +F: Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml
> F: drivers/devfreq/exynos-bus.c
>
> BUSLOGIC SCSI DRIVER
Applied it.
--
Best Regards,
Samsung Electronics
Chanwoo Choi
More information about the linux-arm-kernel
mailing list