[PATCH v6 04/14] dt-bindings: nvmem: Add fsl,scu-ocotp yaml file

[Krzysztof Kozlowski]

On 29/06/2022 18:44, Viorel Suman (OSS) wrote:
> From: Abel Vesa <abel.vesa at nxp.com>
> 
> In order to replace the fsl,scu txt file from bindings/arm/freescale,
> we need to split it between the right subsystems. This patch documents
> separately the 'ocotp' child node of the SCU main node.
> 
> Signed-off-by: Abel Vesa <abel.vesa at nxp.com>
> Signed-off-by: Viorel Suman <viorel.suman at nxp.com>
> ---
>  .../bindings/nvmem/fsl,scu-ocotp.yaml         | 57 +++++++++++++++++++
>  1 file changed, 57 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/nvmem/fsl,scu-ocotp.yaml
> 
> diff --git a/Documentation/devicetree/bindings/nvmem/fsl,scu-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/fsl,scu-ocotp.yaml
> new file mode 100644
> index 000000000000..a8972acb1b01
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/nvmem/fsl,scu-ocotp.yaml
> @@ -0,0 +1,57 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/nvmem/fsl,scu-ocotp.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: i.MX SCU Client Device Node - OCOTP bindings based on SCU Message Protocol
> +
> +maintainers:
> +  - Dong Aisheng <aisheng.dong at nxp.com>
> +
> +description: i.MX SCU Client Device Node
> +  Client nodes are maintained as children of the relevant IMX-SCU device node.
> +  Detailed bindings are described in bindings/nvmem/nvmem.txt

Skip last sentence, does not make sense anymore.

> +
> +allOf:
> +  - $ref: "nvmem.yaml#"

Don't mix quotes. I mentioned it last time, although in other place.

> +
> +properties:
> +  compatible:
> +    enum:
> +      - fsl,imx8qm-scu-ocotp
> +      - fsl,imx8qxp-scu-ocotp
> +
> +patternProperties:
> +  '^mac@[0-9a-f]*$':
> +    type: object
> +    description:
> +      MAC address.
> +
> +    properties:
> +      reg:
> +        description:
> +          Byte offset within OCOTP where the MAC address is stored
> +        maxItems: 1
> +
> +    required:
> +      - reg
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    imx8qx-ocotp {

Just "ocotp" (generic node naming).

> +        compatible = "fsl,imx8qxp-scu-ocotp";
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +
> +        fec_mac0: mac at 2c4 {
> +            reg = <0x2c4 6>;
> +        };
> +    };


Best regards,
Krzysztof