[PATCH net-next v2 02/35] dt-bindings: net: Convert FMan MAC bindings to yaml
Sean Anderson
sean.anderson at seco.com
Tue Jun 28 15:13:31 PDT 2022
This converts the MAC portion of the FMan MAC bindings to yaml.
Signed-off-by: Sean Anderson <sean.anderson at seco.com>
---
Changes in v2:
- New
.../bindings/net/fsl,fman-dtsec.yaml | 144 ++++++++++++++++++
.../devicetree/bindings/net/fsl-fman.txt | 128 +---------------
2 files changed, 145 insertions(+), 127 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml
diff --git a/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml
new file mode 100644
index 000000000000..809df1589f20
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,fman-dtsec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP FMan MAC
+
+maintainers:
+ - Madalin Bucur <madalin.bucur at nxp.com>
+
+description: |
+ Each FMan has several MACs, each implementing an Ethernet interface. Earlier
+ versions of FMan used the Datapath Three Speed Ethernet Controller (dTSEC) for
+ 10/100/1000 MBit/s speeds, and the 10-Gigabit Ethernet Media Access Controller
+ (10GEC) for 10 Gbit/s speeds. Later versions of FMan use the Multirate
+ Ethernet Media Access Controller (mEMAC) to handle all speeds.
+
+properties:
+ compatible:
+ enum:
+ - fsl,fman-dtsec
+ - fsl,fman-xgec
+ - fsl,fman-memac
+
+ cell-index:
+ maximum: 64
+ description: |
+ FManV2:
+ register[bit] MAC cell-index
+ ============================================================
+ FM_EPI[16] XGEC 8
+ FM_EPI[16+n] dTSECn n-1
+ FM_NPI[11+n] dTSECn n-1
+ n = 1,..,5
+
+ FManV3:
+ register[bit] MAC cell-index
+ ============================================================
+ FM_EPI[16+n] mEMACn n-1
+ FM_EPI[25] mEMAC10 9
+
+ FM_NPI[11+n] mEMACn n-1
+ FM_NPI[10] mEMAC10 9
+ FM_NPI[11] mEMAC9 8
+ n = 1,..8
+
+ FM_EPI and FM_NPI are located in the FMan memory map.
+
+ 2. SoC registers:
+
+ - P2041, P3041, P4080 P5020, P5040:
+ register[bit] FMan MAC cell
+ Unit index
+ ============================================================
+ DCFG_DEVDISR2[7] 1 XGEC 8
+ DCFG_DEVDISR2[7+n] 1 dTSECn n-1
+ DCFG_DEVDISR2[15] 2 XGEC 8
+ DCFG_DEVDISR2[15+n] 2 dTSECn n-1
+ n = 1,..5
+
+ - T1040, T2080, T4240, B4860:
+ register[bit] FMan MAC cell
+ Unit index
+ ============================================================
+ DCFG_CCSR_DEVDISR2[n-1] 1 mEMACn n-1
+ DCFG_CCSR_DEVDISR2[11+n] 2 mEMACn n-1
+ n = 1,..6,9,10
+
+ EVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
+ the specific SoC "Device Configuration/Pin Control" Memory
+ Map.
+
+ reg:
+ maxItems: 1
+
+ fsl,fman-ports:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 2
+ description: |
+ An array of two references: the first is the FMan RX port and the second
+ is the TX port used by this MAC.
+
+ ptp-timer:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: A reference to the IEEE1588 timer
+
+ pcsphy-handle:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: A reference to the PCS (typically found on the SerDes)
+
+ tbi-handle:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: A reference to the (TBI-based) PCS
+
+required:
+ - compatible
+ - cell-index
+ - reg
+ - fsl,fman-ports
+ - ptp-timer
+
+allOf:
+ - $ref: "ethernet-controller.yaml#"
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,fman-dtsec
+ then:
+ required:
+ - tbi-handle
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,fman-memac
+ then:
+ required:
+ - pcsphy-handle
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ ethernet at e0000 {
+ compatible = "fsl,fman-dtsec";
+ cell-index = <0>;
+ reg = <0xe0000 0x1000>;
+ fsl,fman-ports = <&fman1_rx8 &fman1_tx28>;
+ ptp-timer = <&ptp_timer>;
+ tbi-handle = <&tbi0>;
+ };
+ - |
+ ethernet at e8000 {
+ cell-index = <4>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe8000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
+ ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy4>;
+ phy-handle = <&sgmii_phy1>;
+ phy-connection-type = "sgmii";
+ };
diff --git a/Documentation/devicetree/bindings/net/fsl-fman.txt b/Documentation/devicetree/bindings/net/fsl-fman.txt
index 801efc7d6818..b9055335db3b 100644
--- a/Documentation/devicetree/bindings/net/fsl-fman.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fman.txt
@@ -232,133 +232,7 @@ port at 81000 {
=============================================================================
FMan dTSEC/XGEC/mEMAC Node
-DESCRIPTION
-
-mEMAC/dTSEC/XGEC are the Ethernet network interfaces
-
-PROPERTIES
-
-- compatible
- Usage: required
- Value type: <stringlist>
- Definition: A standard property.
- Must include one of the following:
- - "fsl,fman-dtsec" for dTSEC MAC
- - "fsl,fman-xgec" for XGEC MAC
- - "fsl,fman-memac" for mEMAC MAC
-
-- cell-index
- Usage: required
- Value type: <u32>
- Definition: Specifies the MAC id.
-
- The cell-index value may be used by the FMan or the SoC, to
- identify the MAC unit in the FMan (or SoC) memory map.
- In the tables below there's a description of the cell-index
- use, there are two tables, one describes the use of cell-index
- by the FMan, the second describes the use by the SoC:
-
- 1. FMan Registers
-
- FManV2:
- register[bit] MAC cell-index
- ============================================================
- FM_EPI[16] XGEC 8
- FM_EPI[16+n] dTSECn n-1
- FM_NPI[11+n] dTSECn n-1
- n = 1,..,5
-
- FManV3:
- register[bit] MAC cell-index
- ============================================================
- FM_EPI[16+n] mEMACn n-1
- FM_EPI[25] mEMAC10 9
-
- FM_NPI[11+n] mEMACn n-1
- FM_NPI[10] mEMAC10 9
- FM_NPI[11] mEMAC9 8
- n = 1,..8
-
- FM_EPI and FM_NPI are located in the FMan memory map.
-
- 2. SoC registers:
-
- - P2041, P3041, P4080 P5020, P5040:
- register[bit] FMan MAC cell
- Unit index
- ============================================================
- DCFG_DEVDISR2[7] 1 XGEC 8
- DCFG_DEVDISR2[7+n] 1 dTSECn n-1
- DCFG_DEVDISR2[15] 2 XGEC 8
- DCFG_DEVDISR2[15+n] 2 dTSECn n-1
- n = 1,..5
-
- - T1040, T2080, T4240, B4860:
- register[bit] FMan MAC cell
- Unit index
- ============================================================
- DCFG_CCSR_DEVDISR2[n-1] 1 mEMACn n-1
- DCFG_CCSR_DEVDISR2[11+n] 2 mEMACn n-1
- n = 1,..6,9,10
-
- EVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
- the specific SoC "Device Configuration/Pin Control" Memory
- Map.
-
-- reg
- Usage: required
- Value type: <prop-encoded-array>
- Definition: A standard property.
-
-- fsl,fman-ports
- Usage: required
- Value type: <prop-encoded-array>
- Definition: An array of two phandles - the first references is
- the FMan RX port and the second is the TX port used by this
- MAC.
-
-- ptp-timer
- Usage required
- Value type: <phandle>
- Definition: A phandle for 1EEE1588 timer.
-
-- pcsphy-handle
- Usage required for "fsl,fman-memac" MACs
- Value type: <phandle>
- Definition: A phandle for pcsphy.
-
-- tbi-handle
- Usage required for "fsl,fman-dtsec" MACs
- Value type: <phandle>
- Definition: A phandle for tbiphy.
-
-EXAMPLE
-
-fman1_tx28: port at a8000 {
- cell-index = <0x28>;
- compatible = "fsl,fman-v2-port-tx";
- reg = <0xa8000 0x1000>;
-};
-
-fman1_rx8: port at 88000 {
- cell-index = <0x8>;
- compatible = "fsl,fman-v2-port-rx";
- reg = <0x88000 0x1000>;
-};
-
-ptp-timer: ptp_timer at fe000 {
- compatible = "fsl,fman-ptp-timer";
- reg = <0xfe000 0x1000>;
-};
-
-ethernet at e0000 {
- compatible = "fsl,fman-dtsec";
- cell-index = <0>;
- reg = <0xe0000 0x1000>;
- fsl,fman-ports = <&fman1_rx8 &fman1_tx28>;
- ptp-timer = <&ptp-timer>;
- tbi-handle = <&tbi0>;
-};
+Refer to Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml
============================================================================
FMan IEEE 1588 Node
--
2.35.1.1320.gc452695387.dirty
More information about the linux-arm-kernel
mailing list