[PATCH v3 2/6] dt-bindings: Use new video interface bus type macros in examples

Laurent Pinchart laurent.pinchart at ideasonboard.com
Mon Jun 27 16:40:07 PDT 2022


Hi Rob,

On Mon, Jun 27, 2022 at 04:16:08PM -0600, Rob Herring wrote:
> On Thu, Jun 16, 2022 at 01:14:06AM +0300, Laurent Pinchart wrote:
> > Now that a header exists with macros for the media interface bus-type
> > values, replace hardcoding numerical constants with the corresponding
> > macros in the DT binding examples.
> > 
> > Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> > ---
> > Changes since v2:
> > 
> > - Go back to PARALLEL
> > 
> > Changes since v1:
> > 
> > - Rename PARALLEL to BT601
> > ---
> >  .../devicetree/bindings/display/bridge/analogix,anx7625.yaml  | 1 +
> >  Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml     | 3 ++-
> >  Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml  | 3 ++-
> >  .../devicetree/bindings/media/marvell,mmp2-ccic.yaml          | 3 ++-
> >  Documentation/devicetree/bindings/media/microchip,xisc.yaml   | 3 ++-
> >  Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml    | 4 +++-
> >  6 files changed, 12 insertions(+), 5 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > index 35a48515836e..b0e5585f93e2 100644
> > --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > @@ -118,6 +118,7 @@ additionalProperties: false
> >  examples:
> >    - |
> >      #include <dt-bindings/gpio/gpio.h>
> > +    #include <dt-bindings/media/video-interfaces.h>
> >  
> >      i2c0 {
> >          #address-cells = <1>;
> > diff --git a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
> > index 39395ea8c318..edde4201116f 100644
> > --- a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
> > +++ b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
> > @@ -104,6 +104,7 @@ additionalProperties: false
> >  examples:
> >    - |
> >      #include <dt-bindings/gpio/gpio.h>
> > +    #include <dt-bindings/media/video-interfaces.h>
> >  
> >      i2c2 {
> >          #address-cells = <1>;
> > @@ -124,7 +125,7 @@ examples:
> >                      remote-endpoint = <&csi2a_ep>;
> >                      link-frequencies = /bits/ 64 <199200000 210000000
> >                                                    499200000>;
> > -                    bus-type = <4>;
> > +                    bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
> >                  };
> >              };
> >          };
> > diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
> > index 44529425ce3a..161e6d598e1c 100644
> > --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
> > +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
> > @@ -105,6 +105,7 @@ additionalProperties: false
> >  examples:
> >    - |
> >      #include <dt-bindings/gpio/gpio.h>
> > +    #include <dt-bindings/media/video-interfaces.h>
> >  
> >      i2c0 {
> >          #address-cells = <1>;
> > @@ -118,7 +119,7 @@ examples:
> >  
> >              port {
> >                  ov772x_0: endpoint {
> > -                    bus-type = <5>;
> > +                    bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
> >                      vsync-active = <0>;
> >                      hsync-active = <0>;
> >                      pclk-sample = <0>;
> > diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
> > index b39b84c5f012..0e3478551e13 100644
> > --- a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
> > +++ b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
> > @@ -68,6 +68,7 @@ additionalProperties: false
> >  examples:
> >    - |
> >      #include <dt-bindings/clock/marvell,mmp2.h>
> > +    #include <dt-bindings/media/video-interfaces.h>
> >      #include <dt-bindings/power/marvell,mmp2.h>
> >  
> >      camera at d420a000 {
> > @@ -83,7 +84,7 @@ examples:
> >        port {
> >          camera0_0: endpoint {
> >            remote-endpoint = <&ov7670_0>;
> > -          bus-type = <5>;      /* Parallel */
> > +          bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
> >            hsync-active = <1>;  /* Active high */
> >            vsync-active = <1>;  /* Active high */
> >            pclk-sample = <0>;   /* Falling */
> > diff --git a/Documentation/devicetree/bindings/media/microchip,xisc.yaml b/Documentation/devicetree/bindings/media/microchip,xisc.yaml
> > index 8b37fccab5e2..25f5f79d40ce 100644
> > --- a/Documentation/devicetree/bindings/media/microchip,xisc.yaml
> > +++ b/Documentation/devicetree/bindings/media/microchip,xisc.yaml
> > @@ -106,6 +106,7 @@ examples:
> >      #include <dt-bindings/interrupt-controller/arm-gic.h>
> >      #include <dt-bindings/clock/at91.h>
> >      #include <dt-bindings/interrupt-controller/irq.h>
> > +    #include <dt-bindings/media/video-interfaces.h>
> >  
> >      xisc: xisc at e1408000 {
> >          compatible = "microchip,sama7g5-isc";
> > @@ -118,7 +119,7 @@ examples:
> >  
> >          port {
> >                  xisc_in: endpoint {
> > -                       bus-type = <5>; /* Parallel */
> > +                       bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
> >                         remote-endpoint = <&csi2dc_out>;
> >                         hsync-active = <1>;
> >                         vsync-active = <1>;
> > diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
> > index 9c1262a276b5..285c6075950a 100644
> > --- a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
> > +++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
> > @@ -90,7 +90,9 @@ examples:
> >    - |
> >      #include <dt-bindings/interrupt-controller/arm-gic.h>
> >      #include <dt-bindings/clock/stm32mp1-clks.h>
> > +    #include <dt-bindings/media/video-interfaces.h>
> >      #include <dt-bindings/reset/stm32mp1-resets.h>
> > +    #
> 
> ?

Oops. I'll blame vim :-) I wonder why I didn't catch that when running
validation. I'll fix it in any case.

> In any case,
> 
> Reviewed-by: Rob Herring <robh at kernel.org>
> 
> >      dcmi: dcmi at 4c006000 {
> >          compatible = "st,stm32-dcmi";
> >          reg = <0x4c006000 0x400>;
> > @@ -104,7 +106,7 @@ examples:
> >          port {
> >               dcmi_0: endpoint {
> >                     remote-endpoint = <&ov5640_0>;
> > -                   bus-type = <5>;
> > +                   bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
> >                     bus-width = <8>;
> >                     hsync-active = <0>;
> >                     vsync-active = <0>;

-- 
Regards,

Laurent Pinchart



More information about the linux-arm-kernel mailing list