[PATCH 0/2] Add SCMI full message tracing

[Jim Quinlan]

On Thu, Jun 23, 2022 at 10:55 AM Cristian Marussi
<cristian.marussi at arm.com> wrote:
>
> Hi,
>
> after a few recent troubles handling too strictly out-of-spec replies from
> SCMI servers deployed in the wild, I though it could have been useful to
> have a basic way to dump at will the effective full payloads of successfuly
> transmitted/received SCMI messages.
>
> The existing SCMI traces already collect a bunch of information about SCMI
> message exchanges but they do NOT keep any payload information: this is
> certainly preferable most of the time since dumping full SCMI messages to
> the trace buffer involves a full copy of the payload.
>
> For this reason I added a new distinct trace_scmi_msg_dump with this series
> in order to be able to selectively enable at will message dumping only when
> required.
>
> Only successfully transmitted and received (valid) xfers are dumped.
>
> At first I was thinking about just dumping raw header and payload, but in
> order to make the log a bit more human readable (without the need of
> tooling to parse the log), I added some parsing/interpretation of the
> header, so that the final result is something like:
>
> root at deb-guest:~# echo 1 > /sys/kernel/debug/tracing/events/scmi/scmi_msg_dump/enable
> root at deb-guest:~# cat /sys/kernel/debug/tracing/trace_pipe
>
> (my annotations non on traces =>>)                       proto  type  cmd   seq  status    payload
>                                                           |      |    |      |     |        |
>  ++ cmd/reply                                             |      |    |      |     |        |
>    cat-224     [002] .....   147.755847: scmi_msg_dump: [0x15]:CMND:[0x06]:[0021]:[0]: 0000000000000000
> <idle>-0       [000] d.h2.   147.758311: scmi_msg_dump: [0x15]:RESP:[0x06]:[0021]:[0]: 25000000000000000000000000000000
>I'll probably still use a script, but
as you are keep
>
>  ++ cmd/reply/delayed
>    cat-223     [001] .....   122.384192: scmi_msg_dump: [0x15]:CMND:[0x06]:[0020]:[0]: 0100000001000000
> <idle>-0       [000] d.h2.   122.405548: scmi_msg_dump: [0x15]:RESP:[0x06]:[0020]:[0]:
> <idle>-0       [000] d.h2.   122.425839: scmi_msg_dump: [0x15]:DLYD:[0x06]:[0020]:[0]: 01000000a05a320000000000efbeaddefecafeca
>
>
>  ++ enable notif/notif
> iio_generic_buf-233     [003] .....   522.399690: scmi_msg_dump: [0x15]:CMND:[0x0A]:[0024]:[0]: 0800000003000000
>          <idle>-0       [000] dNh2.   522.417778: scmi_msg_dump: [0x15]:RESP:[0x0A]:[0024]:[0]: 00000000
>          <idle>-0       [000] d.h2.   522.500945: scmi_msg_dump: [0x15]:NOTI:[0x01]:[0000]:[0]: 000000000800000008daffffffffffff0040d3a45d46fb1610daffffffffffff0040d3a45d46fb1618daffffffffffff0040d3a45d46fb16
>
> Payload is dumped as it comes through byte-by-byte without any endianity
> conversion to avoid further load on the system.
>
> Any thoughs ?

Hi Christian,
I haven't tested this but the format looks good to me.  I have a
couple of minor suggestions
below.

As all numbers are hex, consider dropping the '0x'.  BTW,  the seq
value (eg [0020]) is hex but does not have '0x'.

Some TP_printk()s use this  style:

        scmi_msg_dump: pt=15 t=CMND cmd=06 seq=0021 s=0 pyld=12345678abcdef

which allows one to easily grep, for example, for all non-zero returns

        grep 's=[^0]'

This format is also easy to parse with a script:  strip the preamble,
split on whitespace, and then split on '=' to get the  [key, value]
pairs.

Thanks,
Jim Quinlan
Broadcom STB





>
> Thanks,
> Cristian
>
> Cristian Marussi (2):
>   include: trace: Add SCMI full message tracing
>   firmware: arm_scmi: Use new SCMI full message tracing
>
>  drivers/firmware/arm_scmi/driver.c | 21 ++++++++++++++++++++
>  include/trace/events/scmi.h        | 31 ++++++++++++++++++++++++++++++
>  2 files changed, 52 insertions(+)
>
> --
> 2.32.0
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4210 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20220627/257909bf/attachment.p7s>