[PATCH 00/14] arm64: dts: imx8mp: correct pad settings

[Shawn Guo]

On Wed, Jun 22, 2022 at 02:13:56PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan at nxp.com>
> 
> i.MX8MP iomux pad BIT3 and BIT0 are reserved bits. Writing 1 to the
> reserved bit will be ignored and reading will still return 0. Although
> function not broken with reserved bits set, we should not set reserved
> bits.
> 
> Peng Fan (13):
>   arm64: dts: imx8mp-evk: correct mmc pad settings
>   arm64: dts: imx8mp-evk: correct gpio-led pad settings
>   arm64: dts: imx8mp-evk: correct vbus pad settings
>   arm64: dts: imx8mp-evk: correct eqos pad settings
>   arm64: dts: imx8mp-evk: correct vbus pad settings
>   arm64: dts: imx8mp-evk: correct I2C5 pad settings
>   arm64: dts: imx8mp-evk: correct I2C1 pad settings
>   arm64: dts: imx8mp-evk: correct I2C3 pad settings
>   arm64: dts: imx8mp-venice-gw74xx: correct pad settings
>   arm64: dts: imx8mp-phyboard-pollux-rdk: correct uart pad settings
>   arm64: dts: imx8mp-phyboard-pollux-rdk: correct eqos pad settings
>   arm64: dts: imx8mp-phyboard-pollux-rdk: correct i2c2 & mmc settings
>   arm64: dts: imx8mp-icore-mx8mp-edim2.2: correct pad settings
> 
> Sherry Sun (1):
>   arm64: dts: imx8mp-evk: correct the uart2 pinctl value

Applied all, thanks!