[v3 0/3] Add dtsi for sc7280 herobrine boards that using rt5682 codec

[Bjorn Andersson]

On Tue 24 May 20:43 CDT 2022, Judy Hsiao wrote:

> Put sound node and lpass_cpu node settings for boards that use rt5682
> codec in the sc7280-herobrine-audio-rt5682.dtsi as there are different
> choices of headset codec for herobrine projects. Common audio setting
> for the internal speaker is in sc7280-herobrine.dtsi.
> 
> This series depends on:
> "Add lpass pin control support for audio on sc7280 based targets" [1]
> "Add soundcard support for sc7280 based platforms" [2]
> 
> [1]
> https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638776

Afaict this is applied.

> [2]
> https://patchwork.kernel.org/project/linux-arm-msm/list/?series=643589
> 

But [2] doesn't compile and hence this series doesn't compile.

Can you please submit a single series with all the audio dts patches you
want me to apply, where it's possible to run "make dtbs" after every
single patch in the series.

Thanks,
Bjorn

> 
> Changes Since V2:
>     -- Add bias-disable for i2s ws line.
>     -- Fix typo in the commit message.
> 
> Changes Since V1:
>     -- Remove sound-dai-cells in sound node.
>     -- Add dependency list.
>     -- Update patch subject.
> 
> Judy Hsiao (3):
>   arm64: dts: qcom: sc7280: herobrine: Add pinconf settings for mi2s1
>   arm64: dts: qcom: sc7280: Add sc7280-herobrine-audio-rt5682.dtsi
>   arm64: dts: qcom: sc7280: include sc7280-herobrine-audio-rt5682.dtsi
>     in villager and herobrine-r1
> 
>  .../qcom/sc7280-herobrine-audio-rt5682.dtsi   | 121 ++++++++++++++++++
>  .../qcom/sc7280-herobrine-herobrine-r1.dts    |   1 +
>  .../dts/qcom/sc7280-herobrine-villager-r0.dts |   1 +
>  .../arm64/boot/dts/qcom/sc7280-herobrine.dtsi |  15 +++
>  4 files changed, 138 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
> 
> -- 
> 2.36.1.124.g0e6072fb45-goog
>