[PATCH 2/2] MIPS: dts: align gpio-key node names with dtschema

[Krzysztof Kozlowski]

The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 arch/mips/boot/dts/ingenic/ci20.dts                        | 2 +-
 arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts | 2 +-
 arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts         | 2 +-
 arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts         | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index ab6e3dc0bc1d..37c46720c719 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -31,7 +31,7 @@ memory {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		sw1 {
+		switch {
 			label = "ci20:sw1";
 			linux,code = <KEY_F13>;
 			gpios = <&gpd 17 GPIO_ACTIVE_HIGH>;
diff --git a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
index 826e91b840a3..179558161f85 100644
--- a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
+++ b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
@@ -26,7 +26,7 @@ gpio-keys {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinmux_gpio_gpio>;	/* GPIO11 */
 
-		user_btn1 {
+		button {
 			label = "USER_BTN1";
 			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 			linux,code =<KEY_PROG1> ;
diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts
index 37037e4f3c3b..24eebc5a85b1 100644
--- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts
+++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts
@@ -29,7 +29,7 @@ i2c at 900 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		reset {
+		key-reset {
 			label = "reset";
 			gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_RESTART>;
diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
index a6201a119a1f..34006e667780 100644
--- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
+++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
@@ -29,7 +29,7 @@ i2c at 900 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		reset {
+		key-reset {
 			label = "reset";
 			gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_RESTART>;
-- 
2.34.1