[PATCH V4 2/2] rtc: Introduce ti-k3-rtc

[Georgi Vlaev]

Hi,

On Thu, Jun 23, 2022 at 12:08:08PM -0500, Nishanth Menon wrote:
> Introduce support for Texas Instruments Real Time Clock controller on
> newer K3 family of SoCs such as AM62x.
> 
> The hardware module that is being supported is the "digital only"
> version which doesn't have capability of external wakeup sources and
> external power backup. However, for many practical applications, this
> should suffice as RTC is operational across low power sequences.
> 
> The hardware block by itself is split into two distinct domains
> internally to further reduce the power consumption with the actual
> counter block and comparators clocked off a 32k clock source (which
> based on SoC integration can be sourced by an external crystal) and an
> register interface block which is driven by the bus clock. While optimal
> from power perspective, it does create some complicated synchronizations
> and sequences that one must be wary of in the driver handling.
> 
> Acked-by: Andrew Davis <afd at ti.com>
> Signed-off-by: Nishanth Menon <nm at ti.com>
> ---
> Changes since V3:
> * Updates for fixing typos, removal of un-necessary prints, sharpen
>   usage of ret

Tested on SK-AM62 (AM625).

Tested-by: Georgi Vlaev <g-vlaev at ti.com>

Regards,
Georgi