[PATCH 00/12] i2c: xiic: Added Standard mode and SMBus

Manikanta Guntupalli manikanta.guntupalli at xilinx.com
Fri Jun 24 05:05:15 PDT 2022


-Added standard mode for AXI I2C controller.
-Added Smbus block read support to xiic driver.
-Added 'xlnx,axi-iic-2.1' new IP version support.
-Added dynamic SCL frequency configuration support.
-Removed 'local_irq_save/restore' calls as discussed
 here: https://www.spinics.net/lists/linux-i2c/msg46483.html.
-Corrected the BNB interrupt enable sequence.

Raviteja Narayanam (11):
  i2c: xiic: Add standard mode support for > 255 byte read transfers
  i2c: xiic: Enter standard mode only for > 255 byte read transfers
  i2c: xiic: Fix Rx and Tx paths in standard mode repeated start
  i2c: xiic: Add wait for FIFO empty in send_tx
  i2c: xiic: Use 'nmsgs' variable instead of repeated_start
  i2c: xiic: Add smbus_block_read functionality
  i2c: xiic: Switch to Xiic standard mode for i2c-read
  i2c: xiic: Remove interrupt enable/disable in Rx path
  dt-bindings: i2c: xiic: Add 'xlnx,axi-iic-2.1' to compatible
  i2c: xiic: Update compatible with new IP version
  i2c: xiic: Add SCL frequency configuration support

Srinivas Goud (1):
  i2c: xiic: Correct the BNB interrupt enable sequence

 .../bindings/i2c/xlnx,xps-iic-2.00.a.yaml     |   4 +-
 drivers/i2c/busses/i2c-xiic.c                 | 631 ++++++++++++++++--
 2 files changed, 578 insertions(+), 57 deletions(-)

-- 
2.25.1




More information about the linux-arm-kernel mailing list