[PATCH v5 06/14] dt-bindings: power: Add fsl,scu-pd yaml file

[Krzysztof Kozlowski]

On 16/06/2022 18:42, Viorel Suman wrote:
> From: Abel Vesa <abel.vesa at nxp.com>
> 
> In order to replace the fsl,scu txt file from bindings/arm/freescale,
> we need to split it between the right subsystems. This patch documents
> separately the 'power controller' child node of the SCU main node.
> 
> Signed-off-by: Abel Vesa <abel.vesa at nxp.com>
> Signed-off-by: Viorel Suman <viorel.suman at nxp.com>
> ---
>  .../devicetree/bindings/power/fsl,scu-pd.yaml | 41 +++++++++++++++++++
>  1 file changed, 41 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/fsl,scu-pd.yaml
> 
> diff --git a/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml b/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml
> new file mode 100644
> index 000000000000..9d3cb51d7b37
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml
> @@ -0,0 +1,41 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/fsl,scu-pd.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: i.MX SCU Client Device Node - Power domain bindings based on SCU Message Protocol
> +
> +maintainers:
> +  - Dong Aisheng <aisheng.dong at nxp.com>
> +
> +description: i.MX SCU Client Device Node
> +  Client nodes are maintained as children of the relevant IMX-SCU device node.
> +  Power domain bindings based on SCU Message Protocol
> +
> +allOf:
> +  - $ref: /schemas/power/power-domain.yaml
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - fsl,imx8qm-scu-pd
> +          - fsl,imx8qxp-scu-pd
> +      - const: fsl,scu-pd
> +
> +  '#power-domain-cells':
> +    const: 1
> +
> +required:
> +  - compatible
> +  - '#power-domain-cells'
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    power-controller {
> +             compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";

Wrong indentation.

> +             #power-domain-cells = <1>;
> +    };


Best regards,
Krzysztof