[PATCH 1/3] ARM: dts: stm32: use the correct clock source for CEC on stm32mp151

[gabriel.fernandez at foss.st.com]

From: Gabriel Fernandez <gabriel.fernandez at foss.st.com>

The peripheral clock of CEC is not LSE but CEC.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez at foss.st.com>
---
 arch/arm/boot/dts/stm32mp151.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index edc0a1641c7b..0d8350894257 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -565,7 +565,7 @@ cec: cec at 40016000 {
 			compatible = "st,stm32-cec";
 			reg = <0x40016000 0x400>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc CEC_K>, <&clk_lse>;
+			clocks = <&rcc CEC_K>, <&rcc CEC>;
 			clock-names = "cec", "hdmi-cec";
 			status = "disabled";
 		};
-- 
2.25.1