[PATCH v3 00/14] Add Mediatek MT6370 PMIC support
ChiaEn Wu
peterwu.pub at gmail.com
Thu Jun 23 04:56:17 PDT 2022
From: ChiaEn Wu <chiaen_wu at richtek.com>
This patch series add Mediatek MT6370 PMIC support. The MT6370 is a
highly-integrated smart power management IC, which includes a single
cell Li-Ion/Li-Polymer switching battery charger, a USB
Type-C & Power Delivery (PD) controller, dual Flash LED current sources,
a RGB LED driver, a backlight WLED driver, a display bias driver and a
general LDO for portable devices.
Among with this we took some changes and refined the device tree files to
comply with DT specifications.
Thank you,
ChiaEn Wu
---
Changes in v3:
- Remove ADC ABI file, which is added in v2 Patch 7
- In patch 02/14:
- Add items and remove maxItems of io-channels
- Add io-channel-names and describe each item
- Add "unevaluatedProperties: false" in "usb-otg-vbus-regulator"
- Rename "enable-gpio" to "enable-gpios" in "usb-otg-vbus-regulator"
- In patch 03/14:
- Use leds-class-multicolor.yaml instead of common.yaml.
- Split multi-led and led node.
- Add subdevice "led" in "multi-led".
- In patch 04/14:
- Remove the description of enum.
- In patch 05/14:
- Rename "mediatek,bled-pwm-hys-input-threshold-steps" to
"mediatek,bled-pwm-hys-input-th-steps"
- Refine "bled-pwm-hys-input-th-steps", "bled-ovp-microvolt",
"bled-ocp-microamp" enum values
- In patch 06/14:
- Use " in entire patchset
- Refine ADC description
- Rename "enable-gpio" to "enable-gpios" in "regualtor"
- Change "/schemas/" to "../" in every reference of all MT6370 modules
- In patch 07/14:
- Refine Kconfig help text
- Refine error message of unknown vendor ID in
mt6370_check_vendor_info()
- Refine return value handling of mt6370_regmap_read()
- Refine all probe error by using dev_err_probe()
- Refine "bank_idx" and "bank_addr" in mt6370_regmap_read() and
mt6370_regmap_write()
- Add "#define VENID*" and drop the comments in
mt6370_check_vendor_info()
- Drop "MFD" in MODULE_DESCRIPTION()
- In patch 09/14:
- Refine Kconfig help text
- In patch 10/14:
- Refine Kconfig help text
- Refine all channel value in read_scale()
a. current: uA --> mA
b. voltage: uV --> mV
c. temperature: degrees Celsius --> milli degrees Celsius
- Add "default:" condition of switch statement in read_scale() and read_raw()
- Add error message for reading ADC register failed
- Add the comment for adc_lock
- Add <linux/mod_devicetable.h> header file for struct of_device_id
- Replace "adc" text with "ADC" in all of the error messages
- In patch 12/14:
- Refine the grammer of the Kconfig.
- Change reg mode to the const current mode.
- In patch 14/14:
- Refine bool properties parsing (pwm-enable, ovp-shutdown, ocp-shutdown) in DT
parsing function
- Refine u32 and u8 properties parsing (pwm-hys-input-th-steps, ovp-microvolt,
ocp-microamp), from using register value to using actual value
- Refine error string of "channle-use" parsing failed
- Refine Kconfig help text
Changes in v2:
- In patch 01/15:
- Add "unevaluatedProperties: false".
- Delete "DT bindings".
- Refine the description to fit in 80 columns.
- Skip the connector description.
- In patch 02/15:
- Refine items description of interrupt-name
- Rename "usb-otg-vbus" to "usb-otg-vbus-regulator"
- Add constraint properties for ADC
- In patch 03/15:
- Skip not useful description of "^(multi-)?led@[0-3]$"
and reg.
- Due to the dependency, remove the mention of mfd
document directory.
- Delete Soft-start property. In design aspect, we think
soft-restart should always be enabled, our new chip
has deleted the related setting register , also, we don’t
allow user adjust this parameter in this chip.
- Refine the commit message.
- In patch 04/15:
- Skip not useful description of "^led@[0-1]$" and reg.
- Add apace after '#'.
- Refine the commit message.
- In patch 05/15:
- Remove "binding documentation" in subject title
- Refine description of mt6370 backlight binding
document
- Refine properties name(bled-pwm-hys-input-bit,
bled-ovp-microvolt, bled-ocp-microamp) and their
description
- In patch 06/15:
- Refine ADC and Regulator descriptions
- Refine include header usage in example
- Refine node name to generic node name("pmic at 34")
- Refine led example indentation
- Refine license of mediatek,mt6370_adc.h
- Rename the dts example from IRQ define to number.
- Remove mediatek,mt6370.h
- In patch 07/15:
- Add ABI documentation for mt6370 non-standard ADC
sysfs interfaces.
- In patch 08/15:
- Add all IRQ define into mt6370.c.
- Refine include header usage
- In patch 09/15:
- No changes.
- In patch 10/15:
- Use 'gpiod_get_from_of_node' to replace
'fwnode_gpiod_get_index'.
- In patch 11/15:
- Refine Kconfig mt6370 help text
- Refine mask&shift to FIELD_PREP()
- Refine mutex lock name ("lock" -> "adc_lock")
- Refine mt6370_adc_read_scale()
- Refine mt6370_adc_read_offset()
- Refine mt6370_channel_labels[] by using enum to index
chan spec
- Refine MT6370_ADC_CHAN()
- Refine indio_dev->name
- Remove useless include header files
- In patch 12/15:
- Refine mt6370_chg_otg_rdesc.of_match
("mt6370,otg-vbus" -> "usb-otg-vbus-regulator") to match
DT binding
- In patch 13/15:
- Refine Kconfig description.
- Remove include "linux/of.h" and use
"linux/mod_devicetable.h".
- Place a comma for the last element of the const
unsigned int array.
- Add a comment line for the mutex 'lock'.
- In probe function, use 'dev_err_probe' in some
judgement to reduce the LOC.
- Refine include header usage.
BIT/GENMASK -> linux/bits.h
FIELD_GET -> linux/bitfield.h
- In patch 14/15:
- Add blank line.
- Replace container_of() with to_mt6370_led() .
- Refine description of ramping.
- Refine the mt6370_init_common_properties function.
- Refine the probe return.
- In patch 15/15:
- Refine MT6370 help text in Kconfig
- Refine DT Parse function
- Remove useless enum
- Add comment for 6372 backward compatible in
bl_update_status() and
check_vendor_info()
- Using dev_err_probe(); insteads dev_err()&return; in
the probe()
Alice Chen (2):
dt-bindings: leds: Add Mediatek MT6370 flashlight
leds: flashlight: mt6370: Add Mediatek MT6370 flashlight support
ChiYuan Huang (8):
dt-bindings: usb: Add Mediatek MT6370 TCPC
dt-bindings: leds: mt6370: Add Mediatek mt6370 current sink type LED
indicator
dt-bindings: backlight: Add Mediatek MT6370 backlight
dt-bindings: mfd: Add Mediatek MT6370
mfd: mt6370: Add Mediatek MT6370 support
usb: typec: tcpci_mt6370: Add Mediatek MT6370 tcpci driver
regulator: mt6370: Add mt6370 DisplayBias and VibLDO support
leds: mt6370: Add Mediatek MT6370 current sink type LED Indicator
support
ChiaEn Wu (4):
dt-bindings: power: supply: Add Mediatek MT6370 Charger
iio: adc: mt6370: Add Mediatek MT6370 support
power: supply: mt6370: Add Mediatek MT6370 charger driver
video: backlight: mt6370: Add Mediatek MT6370 support
.../leds/backlight/mediatek,mt6370-backlight.yaml | 92 ++
.../bindings/leds/mediatek,mt6370-flashlight.yaml | 41 +
.../bindings/leds/mediatek,mt6370-indicator.yaml | 77 ++
.../devicetree/bindings/mfd/mediatek,mt6370.yaml | 280 +++++
.../power/supply/mediatek,mt6370-charger.yaml | 87 ++
.../bindings/usb/mediatek,mt6370-tcpc.yaml | 36 +
drivers/iio/adc/Kconfig | 9 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/mt6370-adc.c | 275 +++++
drivers/leds/Kconfig | 11 +
drivers/leds/Makefile | 1 +
drivers/leds/flash/Kconfig | 9 +
drivers/leds/flash/Makefile | 1 +
drivers/leds/flash/leds-mt6370-flash.c | 657 ++++++++++++
drivers/leds/leds-mt6370.c | 989 +++++++++++++++++
drivers/mfd/Kconfig | 13 +
drivers/mfd/Makefile | 1 +
drivers/mfd/mt6370.c | 358 +++++++
drivers/power/supply/Kconfig | 11 +
drivers/power/supply/Makefile | 1 +
drivers/power/supply/mt6370-charger.c | 1132 ++++++++++++++++++++
drivers/regulator/Kconfig | 8 +
drivers/regulator/Makefile | 1 +
drivers/regulator/mt6370-regulator.c | 388 +++++++
drivers/usb/typec/tcpm/Kconfig | 8 +
drivers/usb/typec/tcpm/Makefile | 1 +
drivers/usb/typec/tcpm/tcpci_mt6370.c | 212 ++++
drivers/video/backlight/Kconfig | 9 +
drivers/video/backlight/Makefile | 1 +
drivers/video/backlight/mt6370-backlight.c | 346 ++++++
include/dt-bindings/iio/adc/mediatek,mt6370_adc.h | 18 +
31 files changed, 5074 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
create mode 100644 Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml
create mode 100644 Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml
create mode 100644 Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
create mode 100644 Documentation/devicetree/bindings/usb/mediatek,mt6370-tcpc.yaml
create mode 100644 drivers/iio/adc/mt6370-adc.c
create mode 100644 drivers/leds/flash/leds-mt6370-flash.c
create mode 100644 drivers/leds/leds-mt6370.c
create mode 100644 drivers/mfd/mt6370.c
create mode 100644 drivers/power/supply/mt6370-charger.c
create mode 100644 drivers/regulator/mt6370-regulator.c
create mode 100644 drivers/usb/typec/tcpm/tcpci_mt6370.c
create mode 100644 drivers/video/backlight/mt6370-backlight.c
create mode 100644 include/dt-bindings/iio/adc/mediatek,mt6370_adc.h
--
2.7.4
More information about the linux-arm-kernel
mailing list