[PATCH v10 0/5] media: atmel: atmel-isc: implement media controller

Wed Jun 22 06:52:38 PDT 2022

On 6/22/22 4:35 PM, Hans Verkuil wrote:
> Hi Eugen,
> 
> On 22/06/2022 14:25, Eugen.Hristev at microchip.com wrote:
>> On 6/22/22 2:53 PM, Hans Verkuil wrote:
>>> Hi Eugen,
>>>
>>> On 03/05/2022 11:51, Eugen Hristev wrote:
>>>> This series is a split from the series :
>>>> [PATCH v9 00/13] media: atmel: atmel-isc: implement media controller
>>>> and it includes the media controller part.
>>>> previous fixes were sent on a different patch series.
>>>>
>>>> As discussed on the ML, moving forward with having the media link validate at
>>>> start/stop streaming call.
>>>> I will test the patch :
>>>> [RFC PATCHv2] vb2: add support for (un)prepare_streaming queue ops
>>>> afterwards, but that patch requires moving my logic to the new vb2 callbacks.
>>>
>>> I'm looking at merging this series, but I would like to have the output of
>>> 'v4l2-compliance -m /dev/mediaX' to verify that the MC links etc. is all
>>> correct.
>>
>> Hello Hans,
>>
>> Please have a look at attached file . Unless you want me to add the
>> whole output to the e-mail ?
> 
> No, this is fine, thank you!
> 
>>
>> I also added output of media-ctl -p for your convenience.
>> the subdev2 is a device and driver that is not upstream and has some
>> compliance issues, they are reported by the v4l2-compliance tool, but
>> they should not affect this series, it's a synopsys driver that was
>> rejected on mainline a few years ago, I took it for internal usage, but
>> it's not cleaned up nor worked a lot upon.
> 
> OK, good to know.
> 
>  From the compliance output:
> 
>          v4l2-compliance 1.22.1, 32 bits, 32-bit time_t
> 
> This is an old v4l2-compliance version. Compile it directly from the
> v4l-utils git repo and check the output again.

Okay, I will start a build. I have to get my full environment ready, 
fire up a Buildroot. It will be ready tomorrow.

> 
>          Compliance test for atmel_isc_commo device /dev/media0:
> 
> As you can see, the driver name is cut off. Isn't 'atmel-isc'
> a better name?

Maybe, but this name is the name of the entity, and is taken from the 
name of the kernel module. Since the split of the isc driver into 
atmel_isc_common and atmel-sama5d2-isc , atmel-sama7g5-isc , this name 
has been set for the module here:

https://git.linuxtv.org/hverkuil/media_tree.git/tree/drivers/media/platform/atmel/Makefile?h=for-v5.20e#n7

And the ISC driver takes the module name and uses it for video name here:

https://git.linuxtv.org/hverkuil/media_tree.git/tree/drivers/media/platform/atmel/atmel-isc-base.c?h=for-v5.20e#n1999

> 
>>
>>>
>>> And one more question which may have been answered already in the past:
>>>
>>> Changing to the MC will break existing applications, doesn't it? Or did I
>>> miss something?
>>>
>>
>> The existing applications will have to configure the pipeline now. It
>> will no longer work by configuring just the top video node /dev/video0 .
>> They would have to use media-ctl for it, something similar with this set
>> of commands:
>>
>> media-ctl -d /dev/media0 --set-v4l2 '"imx219
>> 1-0010":0[fmt:SRGGB10_1X10/1920x1080]'
>> media-ctl -d /dev/media0 --set-v4l2
>> '"dw-csi.0":0[fmt:SRGGB10_1X10/1920x1080]'
>> media-ctl -d /dev/media0 --set-v4l2 '"csi2dc":0[fmt:SRGGB10_1X10/1920x1080]'
>> media-ctl -d /dev/media0 --set-v4l2
>> '"atmel_isc_scaler":0[fmt:SRGGB10_1X10/1920x1080]'
> 
> I'd like to see this documented in a new
> Documentation/admin-guide/media/atmel-isc.rst file. That can be a new patch.

Allright, I can do that.

> 
> Regards,
> 
>          Hans
> 
>>
>> Thank you for taking care of this !
>>
>> Eugen
>>
>>> Regards,
>>>
>>>           Hans
>>>
>>>>
>>>> Full series history:
>>>>
>>>> Changes in v10:
>>>> -> split the series into this first fixes part.
>>>> -> moved IO_MC addition from first patch to the second patch on the driver changes
>>>> -> edited commit messages
>>>> -> DT nodes now disabled by default.
>>>>
>>>> Changes in v9:
>>>> -> kernel robot reported isc_link_validate is not static, changed to static.
>>>>
>>>> Changes in v8:
>>>> -> scaler: modified crop bounds to have the exact source size
>>>>
>>>> Changes in v7:
>>>> -> scaler: modified crop bounds to have maximum isc size
>>>> -> format propagation: did small changes as per Jacopo review
>>>>
>>>>
>>>> Changes in v6:
>>>> -> worked a bit on scaler, added try crop and other changes as per Jacopo review
>>>> -> worked on isc-base enum_fmt , reworked as per Jacopo review
>>>>
>>>> Changes in v5:
>>>> -> removed patch that removed the 'stop' variable as it was still required
>>>> -> added two new trivial patches
>>>> -> reworked some parts of the scaler and format propagation after discussions with Jacopo
>>>>
>>>>
>>>> Changes in v4:
>>>> -> as reviewed by Hans, added new patch to remove the 'stop' variable and reworked
>>>> one patch that was using it
>>>> -> as reviewed by Jacopo, reworked some parts of the media controller implementation
>>>>
>>>>
>>>> Changes in v3:
>>>> - change in bindings, small fixes in csi2dc driver and conversion to mc
>>>> for the isc-base.
>>>> - removed some MAINTAINERS patches and used patterns in MAINTAINERS
>>>>
>>>> Changes in v2:
>>>> - integrated many changes suggested by Jacopo in the review of the v1 series.
>>>> - add a few new patches
>>>>
>>>> Eugen Hristev (5):
>>>>     media: atmel: atmel-isc: prepare for media controller support
>>>>     media: atmel: atmel-isc: implement media controller
>>>>     ARM: dts: at91: sama7g5: add nodes for video capture
>>>>     ARM: configs: at91: sama7: add xisc and csi2dc
>>>>     ARM: multi_v7_defconfig: add atmel video pipeline modules
>>>>
>>>>    arch/arm/boot/dts/sama7g5.dtsi                |  51 ++
>>>>    arch/arm/configs/multi_v7_defconfig           |   3 +
>>>>    arch/arm/configs/sama7_defconfig              |   2 +
>>>>    drivers/media/platform/atmel/Makefile         |   2 +-
>>>>    drivers/media/platform/atmel/atmel-isc-base.c | 485 +++++++++---------
>>>>    .../media/platform/atmel/atmel-isc-scaler.c   | 267 ++++++++++
>>>>    drivers/media/platform/atmel/atmel-isc.h      |  50 +-
>>>>    .../media/platform/atmel/atmel-sama5d2-isc.c  |  34 +-
>>>>    .../media/platform/atmel/atmel-sama7g5-isc.c  |  32 +-
>>>>    9 files changed, 685 insertions(+), 241 deletions(-)
>>>>    create mode 100644 drivers/media/platform/atmel/atmel-isc-scaler.c
>>>>
>>>
>>
> 