[PATCH v2 0/3] TQMa8MPxL + MBa8MPxL support

[Alexander Stein]

Hello,

this patch set adds support for TQMa8MPxL on mainboard MBa8MPxL. This
already includes some pinctrl and/or peripheral configurations which are
not yet in use, e.g. PWM for PWM fan, backlight for LVDS panel, etc.
Also note. this only supports MBa8MPxL Rev.2xx, Revision 1xx is
not supported!

Changes in v2:
* Added a-b in patch1
* Changed LED label to function + color
* Renamed some nodes
* Added more pwm-backlight properties
* Added comment about missing display compatible
* Added display power-supply regulator
* Fixed pinctl settings for HDMI mux
* Added patch3 as WIP to show the LVDS overlay

Best regards,
Alexander

Alexander Stein (2):
  arm64: dts: freescale: add initial device tree for TQMa8MPQL with
    i.MX8MP
  [DNI/WIP] arm64: dts: freescale: Add LVDS overlay for TQMa8MPxL

Markus Niebel (1):
  dt-bindings: arm: add TQMa8MPxL board

 .../devicetree/bindings/arm/fsl.yaml          |  12 +
 arch/arm64/boot/dts/freescale/Makefile        |   3 +
 .../imx8mp-tqma8mpql-mba8mpxl-lvds.dts        |  44 ++
 .../freescale/imx8mp-tqma8mpql-mba8mpxl.dts   | 708 ++++++++++++++++++
 .../boot/dts/freescale/imx8mp-tqma8mpql.dtsi  | 284 +++++++
 5 files changed, 1051 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi

-- 
2.25.1