[PATCH 11/14] arm64: dts: imx8mp-phyboard-pollux-rdk: correct uart pad settings

[Peng Fan (OSS)]

From: Peng Fan <peng.fan at nxp.com>

BIT3 and BIT0 are reserved bits, should not touch.

Fixes: 846f752866bd ("arm64: dts: imx8mp-phyboard-pollux-rdk: Change debug UART")
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
index 984a6b9ded8d..e34076954897 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
@@ -156,8 +156,8 @@ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x41
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x49
-			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x49
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x40
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x40
 		>;
 	};
 
-- 
2.25.1