[PATCH 08/14] arm64: dts: imx8mp-evk: correct I2C1 pad settings

[Peng Fan (OSS)]

From: Peng Fan <peng.fan at nxp.com>

According to RM bit layout, BIT3 and BIT0 are reserved.
 8  7   6   5   4   3  2 1  0
PE HYS PUE ODE FSEL X  DSE  X

Although function is not broken, we should not set reserved bit.

Fixes: 5497bc2a2bff ("arm64: dts: imx8mp-evk: Add PMIC device")
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index defba22da183..510f10fc8e1f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -483,8 +483,8 @@ MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x140
 
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c3
-			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c3
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c2
 		>;
 	};
 
-- 
2.25.1