[PATCH 04/14] arm64: dts: imx8mp-evk: correct vbus pad settings

[Peng Fan (OSS)]

From: Peng Fan <peng.fan at nxp.com>

0x19 is not a valid setting. According to RM bit layout, BIT3 and BIT0
are reserved.
  8  7   6   5   4   3  2 1  0
 PE HYS PUE ODE FSEL X  DSE  X

Not set reserved bit.

Fixes: 43da4f92a611 ("arm64: dts: imx8mp-evk: enable usb1 as host mode")
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 0e94e10a38fe..a3195e65c742 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -529,7 +529,7 @@ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x140
 
 	pinctrl_usb1_vbus: usb1grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR	0x19
+			MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR	0x10
 		>;
 	};
 
-- 
2.25.1