❌ FAIL: Test report for kernel 5.19.0-rc3 (arm-next, a111daf0)
CKI Project
cki-project at redhat.com
Tue Jun 21 11:29:01 PDT 2022
Check out this report and any autotriaged failures in our web dashboard:
https://datawarehouse.cki-project.org/kcidb/checkouts/45732
Hello,
We ran automated tests on a recent commit from this kernel tree:
Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git
Commit: a111daf0c53a - Linux 5.19-rc3
The results of these automated tests are provided below.
Overall result: FAILED (see details below)
Merge: OK
Compile: OK
Tests: FAILED
Targeted tests: NO
All kernel binaries, config files, and logs are available for download here:
https://arr-cki-prod-datawarehouse-public.s3.amazonaws.com/index.html?prefix=datawarehouse-public/2022/06/21/568907783
One or more kernel tests failed:
aarch64:
❌ CIFS Connectathon
❌ Networking cki netfilter test
❌ ALSA PCM loopback test
❌ storage: SCSI VPD
❌ storage: software RAID testing
❌ Storage: swraid mdadm raid_module test
❌ LTP - syscalls
❌ CIFS Connectathon
❌ Networking cki netfilter test
❌ ALSA PCM loopback test
❌ storage: SCSI VPD
❌ Boot test
❌ Boot test
We hope that these logs can help you find the problem quickly. For the full
detail on our testing procedures, please scroll to the bottom of this message.
Please reply to this email if you have any questions about the tests that we
ran or if you have any suggestions on how to make future tests more effective.
,-. ,-.
( C ) ( K ) Continuous
`-',-.`-' Kernel
( I ) Integration
`-'
______________________________________________________________________________
Compile testing
---------------
We compiled the kernel for 1 architecture:
aarch64:
make options: make -j24 INSTALL_MOD_STRIP=1 targz-pkg
Hardware testing
----------------
We booted each kernel and ran the following tests:
aarch64:
Host 1:
🚧 ✅ SELinux Custom Module Setup
🚧 ✅ machineinfo
✅ Boot test
✅ kdump - sysrq-c
✅ Reboot test
Host 2:
🚧 ✅ SELinux Custom Module Setup
🚧 ✅ machineinfo
✅ Boot test
✅ selinux-policy: serge-testsuite
✅ Reboot test
Host 3:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
🚧 ✅ SELinux Custom Module Setup
🚧 ✅ machineinfo
✅ Boot test
✅ ACPI table test
✅ ACPI enabled test
✅ i2c: i2cdetect sanity
✅ LTP - cve
✅ LTP - sched
✅ LTP - syscalls
✅ LTP - can
✅ LTP - commands
✅ LTP - containers
✅ LTP - dio
✅ LTP - fs
✅ LTP - fsx
✅ LTP - math
✅ LTP - hugetlb
✅ LTP - mm
✅ LTP - nptl
✅ LTP - pty
✅ LTP - ipc
✅ LTP - tracing
✅ LTP: openposix test suite
❌ CIFS Connectathon
✅ POSIX pjd-fstest suites
✅ Loopdev Sanity
✅ jvm - jcstress tests
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Ethernet drivers sanity
✅ Networking MACsec: sanity
✅ Networking socket: fuzz
✅ Networking sctp-auth: sockopts test
✅ Networking: igmp conformance test
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
❌ Networking cki netfilter test
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking tunnel: permtest
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Networking vnic: ipvlan/basic
✅ Networking VRF: sanity
✅ Libkcapi AF_ALG test
✅ pciutils: update pci ids test
❌ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ Storage: block zstd compression test
✅ Storage: block zstd smoke test
✅ storage: dm/common
✅ lvm thinp sanity
✅ lvm thinp stqe test
✅ lvm snapper test
❌ storage: SCSI VPD
❌ storage: software RAID testing
❌ Storage: swraid mdadm raid_module test
✅ Storage: swraid scsi_raid
⚡⚡⚡ storage: targetcli basic
⚡⚡⚡ trace: ftrace/tracer
⚡⚡⚡ kdump - kexec_boot
🚧 ⚡⚡⚡ Podman system test - as root
🚧 ⚡⚡⚡ Podman system test - as user
🚧 ⚡⚡⚡ Firmware test suite
🚧 ⚡⚡⚡ Memory function: kaslr
🚧 ⚡⚡⚡ Usex - version 1.9-29
🚧 ⚡⚡⚡ lvm cache test
🚧 ⚡⚡⚡ kdump - kexec-file-load
⚡⚡⚡ Reboot test
Host 4:
🚧 ✅ SELinux Custom Module Setup
🚧 ✅ machineinfo
✅ Boot test
✅ kdump - sysrq-c
✅ Reboot test
Host 5:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
🚧 ✅ SELinux Custom Module Setup
🚧 ✅ machineinfo
✅ Boot test
✅ ACPI table test
✅ ACPI enabled test
✅ i2c: i2cdetect sanity
✅ LTP - cve
✅ LTP - sched
❌ LTP - syscalls
✅ LTP - can
✅ LTP - commands
✅ LTP - containers
✅ LTP - dio
✅ LTP - fs
✅ LTP - fsx
✅ LTP - math
✅ LTP - hugetlb
✅ LTP - mm
✅ LTP - nptl
✅ LTP - pty
✅ LTP - ipc
✅ LTP - tracing
✅ LTP: openposix test suite
❌ CIFS Connectathon
✅ POSIX pjd-fstest suites
✅ Loopdev Sanity
✅ jvm - jcstress tests
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Ethernet drivers sanity
✅ Networking MACsec: sanity
✅ Networking socket: fuzz
✅ Networking sctp-auth: sockopts test
✅ Networking: igmp conformance test
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
❌ Networking cki netfilter test
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking tunnel: permtest
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Networking vnic: ipvlan/basic
✅ Networking VRF: sanity
✅ Libkcapi AF_ALG test
✅ pciutils: update pci ids test
❌ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ Storage: block zstd compression test
✅ Storage: block zstd smoke test
✅ storage: dm/common
✅ lvm thinp sanity
✅ lvm thinp stqe test
✅ lvm snapper test
❌ storage: SCSI VPD
⚡⚡⚡ storage: software RAID testing
⚡⚡⚡ Storage: swraid mdadm raid_module test
⚡⚡⚡ Storage: swraid scsi_raid
⚡⚡⚡ storage: targetcli basic
⚡⚡⚡ trace: ftrace/tracer
⚡⚡⚡ kdump - kexec_boot
🚧 ⚡⚡⚡ Podman system test - as root
🚧 ⚡⚡⚡ Podman system test - as user
🚧 ⚡⚡⚡ Firmware test suite
🚧 ⚡⚡⚡ Memory function: kaslr
🚧 ⚡⚡⚡ Usex - version 1.9-29
🚧 ⚡⚡⚡ lvm cache test
🚧 ⚡⚡⚡ kdump - kexec-file-load
⚡⚡⚡ Reboot test
Host 6:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
🚧 ✅ SELinux Custom Module Setup
🚧 ✅ machineinfo
✅ Boot test
✅ xfstests - ext4
✅ xfstests - xfs
🚧 ✅ xfstests - btrfs
⚡⚡⚡ Reboot test
Host 7:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
🚧 ✅ SELinux Custom Module Setup
🚧 ✅ machineinfo
✅ Boot test
✅ xfstests - ext4
✅ xfstests - xfs
🚧 ✅ xfstests - btrfs
⚡⚡⚡ Reboot test
Host 8:
🚧 ✅ SELinux Custom Module Setup
🚧 ✅ machineinfo
✅ Boot test
✅ Reboot test
Host 9:
🚧 ✅ SELinux Custom Module Setup
🚧 ✅ machineinfo
❌ Boot test
✅ IPMI driver test
✅ IPMItool loop stress test
✅ Storage blktests - blk
✅ Storage block - filesystem fio test
✅ Storage block - queue scheduler test
✅ stress: stress-ng - cpu-cache
✅ stress: stress-ng - memory
🚧 ✅ Storage blktests - nvme-tcp
🚧 ❌ Storage block - storage fio numa
✅ Reboot test
Host 10:
🚧 ✅ SELinux Custom Module Setup
🚧 ✅ machineinfo
✅ Boot test
🚧 ✅ Storage blktests - nvmeof-mp
✅ Reboot test
Host 11:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
🚧 ✅ SELinux Custom Module Setup
🚧 ✅ machineinfo
❌ Boot test
✅ IPMI driver test
✅ IPMItool loop stress test
✅ Storage blktests - blk
✅ Storage block - filesystem fio test
✅ Storage block - queue scheduler test
✅ stress: stress-ng - cpu-cache
⚡⚡⚡ stress: stress-ng - memory
🚧 ⚡⚡⚡ Storage blktests - nvme-tcp
🚧 ⚡⚡⚡ Storage block - storage fio numa
⚡⚡⚡ Reboot test
Host 12:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
🚧 ✅ SELinux Custom Module Setup
🚧 ✅ machineinfo
✅ Boot test
✅ xfstests - ext4
✅ xfstests - xfs
🚧 ✅ xfstests - btrfs
⚡⚡⚡ Reboot test
Host 13:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
🚧 ✅ SELinux Custom Module Setup
🚧 ✅ machineinfo
✅ Boot test
✅ xfstests - ext4
✅ xfstests - xfs
🚧 ❌ xfstests - btrfs
⚡⚡⚡ Reboot test
Test sources: https://gitlab.com/redhat/centos-stream/tests/kernel/kernel-tests
💚 Pull requests are welcome for new tests or improvements to existing tests!
Aborted tests
-------------
Tests that didn't complete running successfully are marked with ⚡⚡⚡.
If this was caused by an infrastructure issue, we try to mark that
explicitly in the report.
Waived tests
------------
If the test run included waived tests, they are marked with 🚧. Such tests are
executed but their results are not taken into account. Tests are waived when
their results are not reliable enough, e.g. when they're just introduced or are
being fixed.
Testing timeout
---------------
We aim to provide a report within reasonable timeframe. Tests that haven't
finished running yet are marked with ⏱.
Targeted tests
--------------
Test runs for patches always include a set of base tests, plus some
tests chosen based on the file paths modified by the patch. The latter
are called "targeted tests". If no targeted tests are run, that means
no patch-specific tests are available. Please, consider contributing a
targeted test for related patches to increase test coverage. See
https://docs.engineering.redhat.com/x/_wEZB for more details.
More information about the linux-arm-kernel
mailing list