[PATCH] ARM: dts: imx6qdl-prti6q.dtsi: Add applicable properties to usdhc3

[Ahmad Fatoum]

On 21.06.22 16:03, Robin van der Gracht wrote:
> The usdhc3 interface is connected to a soldered eMMC chip on all boards
> that import this dtsi. Adding these properties speeds up the device probe
> during boot.
> 
> Signed-off-by: Robin van der Gracht <robin at protonic.nl>

Reviewed-by: Ahmad Fatoum <a.fatoum at pengutronix.de>

> ---
>  arch/arm/boot/dts/imx6qdl-prti6q.dtsi | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
> index 19578f660b09..f0db0d4471f4 100644
> --- a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
> @@ -94,6 +94,9 @@ &usdhc3 {
>  	pinctrl-0 = <&pinctrl_usdhc3>;
>  	bus-width = <8>;
>  	non-removable;
> +	no-1-8-v;
> +	no-sd;
> +	no-sdio;
>  	status = "okay";
>  };
>  


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |