[PATCH v3 1/3] ARM: dts: stm32: add STM32MP1-based Phytec SoM

[Alexandre TORGUE]

On 6/21/22 12:15, Steffen Trumtrar wrote:
> The Phytec STM32MP1 based SoMs feature up to 1 GB DDR3LP RAM, up to 1 GB eMMC,
> up to 16 MB QSPI and up to 128 GB NAND flash.
> 
> As multiple default pinctrls are overwritten, collect them in one place
> in stm32mp157c-phycore-stm32mp15-pinctrl.dtsi.
> 
> Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
> ---
> Changes since v2:
>    - /delete-property/dmas
>    - fix dtbs_checks warnings
>    - remove problematic+unused nodes
> 
> 
>   arch/arm/boot/dts/Makefile                    |   3 +-
>   ...stm32mp157c-phycore-stm32mp15-pinctrl.dtsi | 317 +++++++++
>   .../stm32mp157c-phycore-stm32mp15-som.dtsi    | 634 ++++++++++++++++++
>   3 files changed, 953 insertions(+), 1 deletion(-)
>   create mode 100644 arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-pinctrl.dtsi
>   create mode 100644 arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-som.dtsi
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 184899808ee7..de5c3cadb01a 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1213,7 +1213,8 @@ dtb-$(CONFIG_ARCH_STM32) += \
>   	stm32mp157c-ev1.dtb \
>   	stm32mp157c-ev1-scmi.dtb \
>   	stm32mp157c-lxa-mc1.dtb \
> -	stm32mp157c-odyssey.dtb
> +	stm32mp157c-odyssey.dtb \
> +	stm32mp157c-phycore-stm32mp1-3.dtb
>   dtb-$(CONFIG_MACH_SUN4I) += \
>   	sun4i-a10-a1000.dtb \
>   	sun4i-a10-ba10-tvbox.dtb \
> diff --git a/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-pinctrl.dtsi
> new file mode 100644
> index 000000000000..b0b590df43b6
> --- /dev/null
> +++ b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-pinctrl.dtsi
> @@ -0,0 +1,317 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved
> + * Author: Dom VOVARD <dom.vovard at linrt.com>.
> + */
> +#include "stm32mp15-pinctrl.dtsi"
> +

Why do you create a dedicated file for Phytec ? all other SOM providers 
or board providers add their pinctrl groups in stm32mp15-pinctrl.dtsi file.

Apart that, Krzysztof did all the review :) (thanks for that)

Alex