[PATCH 39/49] gpio: sl28cpld: replace irqchip mask_invert with unmask_base

[Andy Shevchenko]

On Mon, Jun 20, 2022 at 10:10 PM Aidan MacDonald
<aidanmacdonald.0x0 at gmail.com> wrote:
>
> An inverted mask register can be described more directly
> as an unmask register.

Reviewed-by: Andy Shevchenko <andy.shevchenko at gmail.com>

> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0 at gmail.com>
> ---
>  drivers/gpio/gpio-sl28cpld.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/drivers/gpio/gpio-sl28cpld.c b/drivers/gpio/gpio-sl28cpld.c
> index 52404736ac86..2195f88c2048 100644
> --- a/drivers/gpio/gpio-sl28cpld.c
> +++ b/drivers/gpio/gpio-sl28cpld.c
> @@ -70,8 +70,7 @@ static int sl28cpld_gpio_irq_init(struct platform_device *pdev,
>         irq_chip->num_irqs = ARRAY_SIZE(sl28cpld_gpio_irqs);
>         irq_chip->num_regs = 1;
>         irq_chip->status_base = base + GPIO_REG_IP;
> -       irq_chip->mask_base = base + GPIO_REG_IE;
> -       irq_chip->mask_invert = true;
> +       irq_chip->unmask_base = base + GPIO_REG_IE;
>         irq_chip->ack_base = base + GPIO_REG_IP;
>
>         ret = devm_regmap_add_irq_chip_fwnode(dev, dev_fwnode(dev),
> --
> 2.35.1
>


-- 
With Best Regards,
Andy Shevchenko