[PATCH 06/49] mfd: wcd934x: Convert irq chip to config regs

Aidan MacDonald aidanmacdonald.0x0 at gmail.com
Mon Jun 20 13:06:01 PDT 2022


Switch the driver to config registers. This will allow the old
type register code in regmap-irq to be removed.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0 at gmail.com>
---
 drivers/mfd/wcd934x.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/mfd/wcd934x.c b/drivers/mfd/wcd934x.c
index 68e2fa2fda99..07e884087f2c 100644
--- a/drivers/mfd/wcd934x.c
+++ b/drivers/mfd/wcd934x.c
@@ -55,17 +55,22 @@ static const struct regmap_irq wcd934x_irqs[] = {
 	WCD934X_REGMAP_IRQ_REG(WCD934X_IRQ_SOUNDWIRE, 2, BIT(4)),
 };
 
+static const unsigned int wcd934x_config_regs[] = {
+	WCD934X_INTR_LEVEL0,
+};
+
 static const struct regmap_irq_chip wcd934x_regmap_irq_chip = {
 	.name = "wcd934x_irq",
 	.status_base = WCD934X_INTR_PIN1_STATUS0,
 	.mask_base = WCD934X_INTR_PIN1_MASK0,
 	.ack_base = WCD934X_INTR_PIN1_CLEAR0,
-	.type_base = WCD934X_INTR_LEVEL0,
-	.num_type_reg = 4,
-	.type_in_mask = false,
 	.num_regs = 4,
 	.irqs = wcd934x_irqs,
 	.num_irqs = ARRAY_SIZE(wcd934x_irqs),
+	.config_base = wcd934x_config_regs,
+	.num_config_bases = ARRAY_SIZE(wcd934x_config_regs),
+	.num_config_regs = 4,
+	.set_type_config = regmap_irq_set_type_config_simple,
 };
 
 static bool wcd934x_is_volatile_register(struct device *dev, unsigned int reg)
-- 
2.35.1




More information about the linux-arm-kernel mailing list