[PATCH] ARM: dts: stm32: Fix SPI2 pinmux pin comments
Alexandre TORGUE
alexandre.torgue at foss.st.com
Mon Jun 20 08:21:43 PDT 2022
Hi Marek
On 6/16/22 01:33, Marek Vasut wrote:
> Those pin comments refer to SPI2 pins, not SPI1 pins, update the comments.
> No functional change.
>
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Alexandre Torgue <alexandre.torgue at foss.st.com>
> Cc: linux-stm32 at st-md-mailman.stormreply.com
> To: linux-arm-kernel at lists.infradead.org
> ---
> arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> index 4f671045a0818..2cc9341d43d29 100644
> --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> @@ -1866,30 +1866,30 @@ pins {
>
> spi2_pins_a: spi2-0 {
> pins1 {
> - pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI1_SCK */
> - <STM32_PINMUX('I', 3, AF5)>; /* SPI1_MOSI */
> + pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */
> + <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */
> bias-disable;
> drive-push-pull;
> slew-rate = <1>;
> };
>
> pins2 {
> - pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI1_MISO */
> + pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */
> bias-disable;
> };
> };
>
> spi2_pins_b: spi2-1 {
I don't have this reference (spi2-1). Do I miss something ?
> pins1 {
> - pinmux = <STM32_PINMUX('I', 1, AF5)>, /* SPI1_SCK */
> - <STM32_PINMUX('I', 3, AF5)>; /* SPI1_MOSI */
> + pinmux = <STM32_PINMUX('I', 1, AF5)>, /* SPI2_SCK */
> + <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */
> bias-disable;
> drive-push-pull;
> slew-rate = <1>;
> };
>
> pins2 {
> - pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI1_MISO */
> + pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */
> bias-disable;
> };
> };
More information about the linux-arm-kernel
mailing list