[PATCH v3 06/18] clk: npcm8xx: add clock controller

[Christophe JAILLET]

Le 19/06/2022 à 17:12, Tomer Maimon a écrit :
> Nuvoton Arbel BMC NPCM8XX contains an integrated clock controller which
> generates and supplies clocks to all modules within the BMC.
> 
> Signed-off-by: Tomer Maimon <tmaimon77-Re5JQEeQqe8AvxtiuMwx3w at public.gmane.org>
> ---
>   drivers/clk/Kconfig       |   6 +
>   drivers/clk/Makefile      |   1 +
>   drivers/clk/clk-npcm8xx.c | 760 ++++++++++++++++++++++++++++++++++++++
>   3 files changed, 767 insertions(+)
>   create mode 100644 drivers/clk/clk-npcm8xx.c
> 

[...]

Hi, below a few comments related to error handling and possible 
dev_err_probe() usage to savec a few LoC.

CJ

> +static struct clk_hw *
> +npcm8xx_clk_register_pll(struct device *dev, void __iomem *pllcon,
> +			 const char *name, const char *parent_name,
> +			 unsigned long flags)
> +{
> +	struct npcm8xx_clk_pll *pll;
> +	struct clk_init_data init;
> +	struct clk_hw *hw;
> +	int ret;
> +
> +	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
> +	if (!pll)
> +		return ERR_PTR(-ENOMEM);
> +
> +	pr_debug("%s reg, name=%s, p=%s\n", __func__, name, parent_name);
> +
> +	init.name = name;
> +	init.ops = &npcm8xx_clk_pll_ops;
> +	init.parent_names = &parent_name;
> +	init.num_parents = 1;
> +	init.flags = flags;
> +
> +	pll->pllcon = pllcon;
> +	pll->hw.init = &init;
> +
> +	hw = &pll->hw;
> +
> +	ret = devm_clk_hw_register(dev, hw);
> +	if (ret) {
> +		kfree(pll);

Hi,

there is no other kfree(() in this patch. It is handled by the framework 
once the clk is registered or should there be another kfree() somewhere 
or should pll be devm_alloc()'ed?


> +		return ERR_PTR(ret);
> +	}
> +
> +	return hw;
> +}
> +

[...]

> +static int npcm8xx_clk_probe(struct platform_device *pdev)
> +{
> +	struct clk_hw_onecell_data *npcm8xx_clk_data;
> +	struct device *dev = &pdev->dev;
> +	void __iomem *clk_base;
> +	struct clk_hw *hw;
> +	int i;
> +
> +	npcm8xx_clk_data = devm_kzalloc(dev, struct_size(npcm8xx_clk_data, hws,
> +							 NPCM8XX_NUM_CLOCKS),
> +					GFP_KERNEL);
> +	if (!npcm8xx_clk_data)
> +		return -ENOMEM;
> +
> +	clk_base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(clk_base))
> +		return PTR_ERR(clk_base);
> +
> +	npcm8xx_clk_data->num = NPCM8XX_NUM_CLOCKS;
> +
> +	for (i = 0; i < NPCM8XX_NUM_CLOCKS; i++)
> +		npcm8xx_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER);
> +
> +	/* Reference 25MHz clock */
> +	hw = clk_hw_register_fixed_rate(dev, "refclk", NULL, 0, NPCM8XX_REF_CLK);

Other resoruces are managed, but not this one.
Is it on purpose?
Is an error handling path needed or a devm_add_action_or_reset()?

> +	if (IS_ERR(hw))
> +		return PTR_ERR(hw);
> +	npcm8xx_clk_data->hws[NPCM8XX_CLK_REFCLK] = hw;
> +
> +	/* Register plls */
> +	for (i = 0; i < ARRAY_SIZE(npcm8xx_plls); i++) {
> +		const struct npcm8xx_clk_pll_data *pll_data = &npcm8xx_plls[i];
> +
> +		hw = npcm8xx_clk_register_pll(dev, clk_base + pll_data->reg,
> +					      pll_data->name,
> +					      pll_data->parent_name,
> +					      pll_data->flags);
> +		if (IS_ERR(hw)) {
> +			dev_err(dev, "npcm8xx_clk: Can't register pll\n");
> +			return PTR_ERR(hw);
> +		}
> +
> +		if (pll_data->onecell_idx >= 0)
> +			npcm8xx_clk_data->hws[pll_data->onecell_idx] = hw;
> +	}
> +
> +	/* Register fixed dividers */
> +	hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PLL1_DIV2,
> +					       NPCM8XX_CLK_S_PLL1, 0, 1, 2);
> +	if (IS_ERR(hw)) {
> +		dev_err(dev, "npcm8xx_clk: Can't register fixed div\n");
> +		return PTR_ERR(hw);

return dev_err_probe()?

> +	}
> +
> +	hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PLL2_DIV2,
> +					       NPCM8XX_CLK_S_PLL2, 0, 1, 2);
> +	if (IS_ERR(hw)) {
> +		dev_err(dev, "npcm8xx_clk: Can't register pll div2\n");
> +		return PTR_ERR(hw);

Same here and in other calls below.

> +	}
> +
> +	hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PRE_CLK,
> +					       NPCM8XX_CLK_S_CPU_MUX, 0, 1, 2);
> +	if (IS_ERR(hw)) {
> +		dev_err(dev, "npcm8xx_clk: Can't register ckclk div2\n");
> +		return PTR_ERR(hw);
> +	}
> +
> +	hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_AXI,
> +					       NPCM8XX_CLK_S_TH, 0, 1, 2);
> +	if (IS_ERR(hw)) {
> +		dev_err(dev, "npcm8xx_clk: Can't register axi div2\n");
> +		return PTR_ERR(hw);
> +	}
> +
> +	hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_ATB,
> +					       NPCM8XX_CLK_S_AXI, 0, 1, 2);
> +	if (IS_ERR(hw)) {
> +		dev_err(dev, "npcm8xx_clk: Can't register atb div2\n");
> +		return PTR_ERR(hw);
> +	}
> +
> +	/* Register muxes */
> +	for (i = 0; i < ARRAY_SIZE(npcm8xx_muxes); i++) {
> +		const struct npcm8xx_clk_mux_data *mux_data = &npcm8xx_muxes[i];
> +
> +		hw = clk_hw_register_mux_table(dev, mux_data->name,
> +					       mux_data->parent_names,
> +					       mux_data->num_parents,
> +					       mux_data->flags,
> +					       clk_base + NPCM8XX_CLKSEL,
> +					       mux_data->shift,
> +					       mux_data->mask, 0,
> +					       mux_data->table,
> +					       &npcm8xx_clk_lock);
> +
Same here. Error handling?

> +		if (IS_ERR(hw)) {
> +			dev_err(dev, "npcm8xx_clk: Can't register mux\n");
> +			return PTR_ERR(hw);
> +		}
> +
> +		if (mux_data->onecell_idx >= 0)
> +			npcm8xx_clk_data->hws[mux_data->onecell_idx] = hw;
> +	}
> +
> +	/* Register clock dividers specified in npcm8xx_divs */
> +	for (i = 0; i < ARRAY_SIZE(npcm8xx_divs); i++) {
> +		const struct npcm8xx_clk_div_data *div_data = &npcm8xx_divs[i];
> +
> +		hw = clk_hw_register_divider(dev, div_data->name,
> +					     div_data->parent_name,
> +					     div_data->flags,
> +					     clk_base + div_data->reg,
> +					     div_data->shift, div_data->width,
> +					     div_data->clk_divider_flags,
> +					     &npcm8xx_clk_lock);

devm_clk_hw_register_divider()?

> +		if (IS_ERR(hw)) {
> +			dev_err(dev, "npcm8xx_clk: Can't register div table\n");
> +			return PTR_ERR(hw);
> +		}
> +
> +		if (div_data->onecell_idx >= 0)
> +			npcm8xx_clk_data->hws[div_data->onecell_idx] = hw;
> +	}
> +
> +	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
> +					   npcm8xx_clk_data);
> +}
> +
> +static const struct of_device_id npcm8xx_clk_dt_ids[] = {
> +	{ .compatible = "nuvoton,npcm845-clk", },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, npcm8xx_clk_dt_ids);
> +
> +static struct platform_driver npcm8xx_clk_driver = {
> +	.probe  = npcm8xx_clk_probe,
> +	.driver = {
> +		.name = "npcm8xx_clk",
> +		.of_match_table = npcm8xx_clk_dt_ids,
> +	},
> +};
> +
> +static int __init npcm8xx_clk_driver_init(void)
> +{
> +	return platform_driver_register(&npcm8xx_clk_driver);
> +}
> +arch_initcall(npcm8xx_clk_driver_init);
> +