[PATCH v2 02/15] dt-bindings: power: supply: Add Mediatek MT6370 Charger
Krzysztof Kozlowski
krzysztof.kozlowski at linaro.org
Fri Jun 17 16:12:01 PDT 2022
On 17/06/2022 03:19, ChiaEn Wu wrote:
> Hi Krzysztof,
>
> Thanks for your helpful comments! I have so some questions want to ask
> you below.
>
> Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org> 於 2022年6月17日 週五 清晨5:05寫道:
>>
>> On 13/06/2022 04:11, ChiaEn Wu wrote:
>>> From: ChiaEn Wu <chiaen_wu at richtek.com>
>>>
>>> Add Mediatek MT6370 Charger binding documentation.
>>>
>>> Signed-off-by: ChiaEn Wu <chiaen_wu at richtek.com>
>>> ---
>>> .../power/supply/mediatek,mt6370-charger.yaml | 60 +++++++++++++++++++
>>> 1 file changed, 60 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
>>> new file mode 100644
>>> index 000000000000..b63553ebb15b
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
>>> @@ -0,0 +1,60 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/power/supply/mediatek,mt6370-charger.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Mediatek MT6370 Battery Charger
>>> +
>>> +maintainers:
>>> + - ChiaEn Wu <chiaen_wu at richtek.com>
>>> +
>>> +description: |
>>> + This module is part of the MT6370 MFD device.
>>> + Provides Battery Charger, Boost for OTG devices and BC1.2 detection.
>>> +
>>> +properties:
>>> + compatible:
>>> + const: mediatek,mt6370-charger
>>> +
>>> + interrupts:
>>> + description: |
>>> + Specify what irqs are needed to be handled by MT6370 Charger driver. IRQ
>>> + "MT6370_IRQ_CHG_MIVR", "MT6370_IRQ_ATTACH" and "MT6370_IRQ_OVPCTRL_UVP_D"
>>> + are required.
>>> + items:
>>> + - description: BC1.2 done irq
>>> + - description: usb plug in irq
>>> + - description: mivr irq
>>> +
>>> + interrupt-names:
>>> + items:
>>> + - const: attach_i
>>> + - const: uvp_d_evt
>>> + - const: mivr
>>> +
>>> + io-channels:
>>> + description: |
>>> + Use ADC channel to read vbus, ibus, ibat, etc., info. Ibus ADC channel
>>> + is required.
>>
>> Add io-channel-names and describe each item - what type of ADC it is
>> expected to be.
>>
>
> I'm afraid I might not be understanding what you mean.
> I will try to add some text in "description" and "io-channel-names", like below
> ----------------------------------
> io-channels:
> description: |
> Use ADC channel to read VBUS, IBUS, IBAT, etc., info. Ibus ADC channel
> is required. It can be seen in
> include/dt-bindings/iio/adc/mediatek,mt6370_adc.h
> minItems: 1
> maxItems: 9
>
> io-channel-names:
> items:
> - const: vbusdiv5
> - const: vbusdiv2
Almost. The best would be something like this:
Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml
so also "items" with description under "io-channels". You need to skip
maxItems in such case (keep minItems).
> - ...
> ----------------------------------
> Did these modifications meet your expectations?
>
>>> + minItems: 1
>>> + maxItems: 9
>>> +
>>> + usb-otg-vbus-regulator:
>>> + type: object
>>> + description: OTG boost regulator.
>>> + $ref: /schemas/regulator/regulator.yaml#
>>
>> unevaluatedProperties: false
>
> I will add this in the next patch.
>
>>
>>> +
>>> + properties:
>>> + enable-gpio:
>>
>> "gpios", so:
>> enable-gpios
>
> If this otg regulator only uses one GPIO Pin, do I still need to
> change to "gpios"?
Yes, because "gpios" is the preferred suffix. This is requirement for
all such properties. enable-gpios are also documented here:
Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml
> If so, I will refine it along with the regulator "enable-gpio" in MFD
> dt-binding.
Yes, there it should be "enable-gpios" as well.
Best regards,
Krzysztof
More information about the linux-arm-kernel
mailing list