[PATCH v2 08/15] mfd: mt6370: Add Mediatek MT6370 support
ChiaEn Wu
peterwu.pub at gmail.com
Fri Jun 17 10:15:29 PDT 2022
Hi Lee,
Thanks for your helpful comments, we have some questions and replies below.
Lee Jones <lee.jones at linaro.org> 於 2022年6月16日 週四 清晨6:49寫道：
>
> On Mon, 13 Jun 2022, ChiaEn Wu wrote:
>
> > From: ChiYuan Huang <cy_huang at richtek.com>
> >
> > Add Mediatek MT6370 MFD support.
> >
> > Signed-off-by: ChiYuan Huang <cy_huang at richtek.com>
> > ---
> > drivers/mfd/Kconfig | 13 ++
> > drivers/mfd/Makefile | 1 +
> > drivers/mfd/mt6370.c | 349 +++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 363 insertions(+)
> > create mode 100644 drivers/mfd/mt6370.c
> >
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > index 3b59456f5545..d9a7524a3e0e 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -937,6 +937,19 @@ config MFD_MT6360
> > PMIC part includes 2-channel BUCKs and 2-channel LDOs
> > LDO part includes 4-channel LDOs
> >
> > +config MFD_MT6370
> > + tristate "Mediatek MT6370 SubPMIC"
> > + select MFD_CORE
> > + select REGMAP_I2C
> > + select REGMAP_IRQ
> > + depends on I2C
> > + help
> > + Say Y here to enable MT6370 SubPMIC functional support.
> > + It integrate single cell battery charger with adc monitoring, RGB
>
> s/integrates/consists of a/
>
> "ADC"
We will fine it in the next patch.
>
> > + LEDs, dual channel flashlight, WLED backlight driver, display bias
>
> > + voltage supply, one general purpose LDO, and cc logic
> > + controller with USBPD commmunication capable.
>
> The last part makes no sense - "and is USBPD"?
If we modify this help text to
"one general purpose LDO, and the USB Type-C & PD controller complies
with the latest USB Type-C and PD standards",
did these modifications meet your expectations?
>
> > config MFD_MT6397
> > tristate "MediaTek MT6397 PMIC Support"
> > select MFD_CORE
> > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> > index 858cacf659d6..62b27125420e 100644
> > --- a/drivers/mfd/Makefile
> > +++ b/drivers/mfd/Makefile
> > @@ -242,6 +242,7 @@ obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC) += intel_soc_pmic_bxtwc.o
> > obj-$(CONFIG_INTEL_SOC_PMIC_CHTWC) += intel_soc_pmic_chtwc.o
> > obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI) += intel_soc_pmic_chtdc_ti.o
> > obj-$(CONFIG_MFD_MT6360) += mt6360-core.o
> > +obj-$(CONFIG_MFD_MT6370) += mt6370.o
> > mt6397-objs := mt6397-core.o mt6397-irq.o mt6358-irq.o
> > obj-$(CONFIG_MFD_MT6397) += mt6397.o
> > obj-$(CONFIG_INTEL_SOC_PMIC_MRFLD) += intel_soc_pmic_mrfld.o
> > diff --git a/drivers/mfd/mt6370.c b/drivers/mfd/mt6370.c
> > new file mode 100644
> > index 000000000000..6af9f73c9c0c
> > --- /dev/null
> > +++ b/drivers/mfd/mt6370.c
> > @@ -0,0 +1,349 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +
> > +#include <linux/bits.h>
> > +#include <linux/i2c.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <linux/mfd/core.h>
> > +#include <linux/module.h>
> > +#include <linux/regmap.h>
> > +
> > +enum {
> > + MT6370_USBC_I2C = 0,
> > + MT6370_PMU_I2C,
> > + MT6370_MAX_I2C
> > +};
> > +
> > +#define MT6370_REG_DEV_INFO 0x100
> > +#define MT6370_REG_CHG_IRQ1 0x1C0
> > +#define MT6370_REG_CHG_MASK1 0x1E0
> > +
> > +#define MT6370_VENID_MASK GENMASK(7, 4)
> > +
> > +#define MT6370_NUM_IRQREGS 16
> > +#define MT6370_USBC_I2CADDR 0x4E
> > +#define MT6370_REG_ADDRLEN 2
> > +#define MT6370_REG_MAXADDR 0x1FF
> > +
> > +/* IRQ definitions */
> > +#define MT6370_IRQ_DIRCHGON 0
> > +#define MT6370_IRQ_CHG_TREG 4
> > +#define MT6370_IRQ_CHG_AICR 5
> > +#define MT6370_IRQ_CHG_MIVR 6
> > +#define MT6370_IRQ_PWR_RDY 7
> > +#define MT6370_IRQ_FL_CHG_VINOVP 11
> > +#define MT6370_IRQ_CHG_VSYSUV 12
> > +#define MT6370_IRQ_CHG_VSYSOV 13
> > +#define MT6370_IRQ_CHG_VBATOV 14
> > +#define MT6370_IRQ_CHG_VINOVPCHG 15
> > +#define MT6370_IRQ_TS_BAT_COLD 20
> > +#define MT6370_IRQ_TS_BAT_COOL 21
> > +#define MT6370_IRQ_TS_BAT_WARM 22
> > +#define MT6370_IRQ_TS_BAT_HOT 23
> > +#define MT6370_IRQ_TS_STATC 24
> > +#define MT6370_IRQ_CHG_FAULT 25
> > +#define MT6370_IRQ_CHG_STATC 26
> > +#define MT6370_IRQ_CHG_TMR 27
> > +#define MT6370_IRQ_CHG_BATABS 28
> > +#define MT6370_IRQ_CHG_ADPBAD 29
> > +#define MT6370_IRQ_CHG_RVP 30
> > +#define MT6370_IRQ_TSHUTDOWN 31
> > +#define MT6370_IRQ_CHG_IINMEAS 32
> > +#define MT6370_IRQ_CHG_ICCMEAS 33
> > +#define MT6370_IRQ_CHGDET_DONE 34
> > +#define MT6370_IRQ_WDTMR 35
> > +#define MT6370_IRQ_SSFINISH 36
> > +#define MT6370_IRQ_CHG_RECHG 37
> > +#define MT6370_IRQ_CHG_TERM 38
> > +#define MT6370_IRQ_CHG_IEOC 39
> > +#define MT6370_IRQ_ADC_DONE 40
> > +#define MT6370_IRQ_PUMPX_DONE 41
> > +#define MT6370_IRQ_BST_BATUV 45
> > +#define MT6370_IRQ_BST_MIDOV 46
> > +#define MT6370_IRQ_BST_OLP 47
> > +#define MT6370_IRQ_ATTACH 48
> > +#define MT6370_IRQ_DETACH 49
> > +#define MT6370_IRQ_HVDCP_STPDONE 51
> > +#define MT6370_IRQ_HVDCP_VBUSDET_DONE 52
> > +#define MT6370_IRQ_HVDCP_DET 53
> > +#define MT6370_IRQ_CHGDET 54
> > +#define MT6370_IRQ_DCDT 55
> > +#define MT6370_IRQ_DIRCHG_VGOK 59
> > +#define MT6370_IRQ_DIRCHG_WDTMR 60
> > +#define MT6370_IRQ_DIRCHG_UC 61
> > +#define MT6370_IRQ_DIRCHG_OC 62
> > +#define MT6370_IRQ_DIRCHG_OV 63
> > +#define MT6370_IRQ_OVPCTRL_SWON 67
> > +#define MT6370_IRQ_OVPCTRL_UVP_D 68
> > +#define MT6370_IRQ_OVPCTRL_UVP 69
> > +#define MT6370_IRQ_OVPCTRL_OVP_D 70
> > +#define MT6370_IRQ_OVPCTRL_OVP 71
> > +#define MT6370_IRQ_FLED_STRBPIN 72
> > +#define MT6370_IRQ_FLED_TORPIN 73
> > +#define MT6370_IRQ_FLED_TX 74
> > +#define MT6370_IRQ_FLED_LVF 75
> > +#define MT6370_IRQ_FLED2_SHORT 78
> > +#define MT6370_IRQ_FLED1_SHORT 79
> > +#define MT6370_IRQ_FLED2_STRB 80
> > +#define MT6370_IRQ_FLED1_STRB 81
> > +#define mT6370_IRQ_FLED2_STRB_TO 82
> > +#define MT6370_IRQ_FLED1_STRB_TO 83
> > +#define MT6370_IRQ_FLED2_TOR 84
> > +#define MT6370_IRQ_FLED1_TOR 85
> > +#define MT6370_IRQ_OTP 93
> > +#define MT6370_IRQ_VDDA_OVP 94
> > +#define MT6370_IRQ_VDDA_UV 95
> > +#define MT6370_IRQ_LDO_OC 103
> > +#define MT6370_IRQ_BLED_OCP 118
> > +#define MT6370_IRQ_BLED_OVP 119
> > +#define MT6370_IRQ_DSV_VNEG_OCP 123
> > +#define MT6370_IRQ_DSV_VPOS_OCP 124
> > +#define MT6370_IRQ_DSV_BST_OCP 125
> > +#define MT6370_IRQ_DSV_VNEG_SCP 126
> > +#define MT6370_IRQ_DSV_VPOS_SCP 127
> > +
> > +struct mt6370_info {
> > + struct i2c_client *i2c[MT6370_MAX_I2C];
> > + struct device *dev;
> > + struct regmap *regmap;
> > + struct regmap_irq_chip_data *irq_data;
> > +};
>
> Can we shove all of the above into a header file?
Well... In Patch v1, we put these "#define IRQ" into
"include/dt-bindings/mfd/mediatek,mt6370.h".
But the reviewer of DT files hoped us to remove this header file, we
put these "#define IRQ" in this .c file.
Shall we leave them here or put them into the header file in
"driver/power/supply/mt6370-charger.h"?
>
> > +static const struct regmap_irq mt6370_irqs[] = {
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHGON, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_TREG, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_AICR, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_MIVR, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_PWR_RDY, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FL_CHG_VINOVP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_VSYSUV, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_VSYSOV, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_VBATOV, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_VINOVPCHG, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_TS_BAT_COLD, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_TS_BAT_COOL, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_TS_BAT_WARM, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_TS_BAT_HOT, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_TS_STATC, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_FAULT, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_STATC, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_TMR, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_BATABS, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_ADPBAD, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_RVP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_TSHUTDOWN, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_IINMEAS, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_ICCMEAS, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHGDET_DONE, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_WDTMR, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_SSFINISH, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_RECHG, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_TERM, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_IEOC, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_ADC_DONE, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_PUMPX_DONE, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_BST_BATUV, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_BST_MIDOV, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_BST_OLP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_ATTACH, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DETACH, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_HVDCP_STPDONE, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_HVDCP_VBUSDET_DONE, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_HVDCP_DET, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHGDET, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DCDT, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHG_VGOK, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHG_WDTMR, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHG_UC, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHG_OC, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHG_OV, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_OVPCTRL_SWON, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_OVPCTRL_UVP_D, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_OVPCTRL_UVP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_OVPCTRL_OVP_D, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_OVPCTRL_OVP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED_STRBPIN, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED_TORPIN, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED_TX, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED_LVF, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED2_SHORT, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED1_SHORT, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED2_STRB, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED1_STRB, 8),
> > + REGMAP_IRQ_REG_LINE(mT6370_IRQ_FLED2_STRB_TO, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED1_STRB_TO, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED2_TOR, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED1_TOR, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_OTP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_VDDA_OVP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_VDDA_UV, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_LDO_OC, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_BLED_OCP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_BLED_OVP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DSV_VNEG_OCP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DSV_VPOS_OCP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DSV_BST_OCP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DSV_VNEG_SCP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DSV_VPOS_SCP, 8)
> > +};
> > +
> > +static const struct regmap_irq_chip mt6370_irq_chip = {
> > + .name = "mt6370-irqs",
> > + .status_base = MT6370_REG_CHG_IRQ1,
> > + .mask_base = MT6370_REG_CHG_MASK1,
> > + .num_regs = MT6370_NUM_IRQREGS,
> > + .irqs = mt6370_irqs,
> > + .num_irqs = ARRAY_SIZE(mt6370_irqs),
> > +};
> > +
> > +static const struct resource mt6370_regulator_irqs[] = {
> > + DEFINE_RES_IRQ_NAMED(MT6370_IRQ_DSV_VPOS_SCP, "db_vpos_scp"),
> > + DEFINE_RES_IRQ_NAMED(MT6370_IRQ_DSV_VNEG_SCP, "db_vneg_scp"),
> > + DEFINE_RES_IRQ_NAMED(MT6370_IRQ_DSV_BST_OCP, "db_vbst_ocp"),
> > + DEFINE_RES_IRQ_NAMED(MT6370_IRQ_DSV_VPOS_OCP, "db_vpos_ocp"),
> > + DEFINE_RES_IRQ_NAMED(MT6370_IRQ_DSV_VNEG_OCP, "db_vneg_ocp"),
> > + DEFINE_RES_IRQ_NAMED(MT6370_IRQ_LDO_OC, "ldo_oc")
> > +};
> > +
> > +static const struct mfd_cell mt6370_devices[] = {
> > + MFD_CELL_OF("adc", NULL, NULL, 0, 0, "mediatek,mt6370-adc"),
> > + MFD_CELL_OF("charger", NULL, NULL, 0, 0, "mediatek,mt6370-charger"),
> > + MFD_CELL_OF("backlight", NULL, NULL, 0, 0, "mediatek,mt6370-backlight"),
> > + MFD_CELL_OF("flashlight", NULL, NULL, 0, 0, "mediatek,mt6370-flashlight"),
> > + MFD_CELL_OF("indicator", NULL, NULL, 0, 0, "mediatek,mt6370-indicator"),
> > + MFD_CELL_OF("tcpc", NULL, NULL, 0, 0, "mediatek,mt6370-tcpc"),
> > + MFD_CELL_RES("regulator", mt6370_regulator_irqs)
> > +};
> > +
> > +static int mt6370_check_vendor_info(struct mt6370_info *info)
> > +{
> > + unsigned int devinfo;
> > + int ret;
> > +
> > + ret = regmap_read(info->regmap, MT6370_REG_DEV_INFO, &devinfo);
> > + if (ret)
> > + return ret;
> > +
> > + switch (FIELD_GET(MT6370_VENID_MASK, devinfo)) {
> > + case 0x8: /* RT5081 */
> > + case 0xA: /* RT5081A */
> > + case 0xE: /* MT6370 */
> > + case 0xF: /* MT6371 */
> > + case 0x9: /* MT6372P */
> > + case 0xB: /* MT6372CP */
>
> Please define these and drop the comments.
OK, we will refine them in the next patch! Thanks!
>
> > + break;
> > + default:
> > + dev_err(info->dev, "Not invalid value 0x%02x\n", devinfo);
> > + return -ENODEV;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int mt6370_regmap_read(void *context, const void *reg_buf,
> > + size_t reg_size, void *val_buf, size_t val_size)
> > +{
> > + struct mt6370_info *info = context;
> > + u8 bank_idx = *(u8 *)reg_buf, bank_addr = *(u8 *)(reg_buf + 1);
>
> Looks a little scruffy. Perhaps allocate the values below.
>
> > + int ret;
> > +
> > + ret = i2c_smbus_read_i2c_block_data(info->i2c[bank_idx], bank_addr,
> > + val_size, val_buf);
> > + if (ret != val_size)
> > + return ret;
> > +
> > + return 0;
> > +}
> > +
> > +static int mt6370_regmap_write(void *context, const void *data, size_t count)
> > +{
> > + struct mt6370_info *info = context;
> > + u8 bank_idx = *(u8 *)data, bank_addr = *(u8 *)(data + 1);
>
> As above.
OK, we will try to refine these parts in the next patch.
>
> > + int len = count - MT6370_REG_ADDRLEN;
> > +
> > + return i2c_smbus_write_i2c_block_data(info->i2c[bank_idx], bank_addr,
> > + len, data + MT6370_REG_ADDRLEN);
> > +}
> > +
> > +static const struct regmap_bus mt6370_regmap_bus = {
> > + .read = mt6370_regmap_read,
> > + .write = mt6370_regmap_write,
> > +};
> > +
> > +static const struct regmap_config mt6370_regmap_config = {
> > + .reg_bits = 16,
> > + .val_bits = 8,
> > + .reg_format_endian = REGMAP_ENDIAN_BIG,
> > + .max_register = MT6370_REG_MAXADDR,
> > +};
> > +
> > +static int mt6370_probe(struct i2c_client *i2c)
> > +{
> > + struct mt6370_info *info;
> > + struct i2c_client *usbc_i2c;
> > + int ret;
> > +
> > + info = devm_kzalloc(&i2c->dev, sizeof(*info), GFP_KERNEL);
> > + if (!info)
> > + return -ENOMEM;
> > +
> > + info->dev = &i2c->dev;
> > +
> > + usbc_i2c = devm_i2c_new_dummy_device(&i2c->dev, i2c->adapter,
> > + MT6370_USBC_I2CADDR);
> > + if (IS_ERR(usbc_i2c)) {
> > + ret = PTR_ERR(usbc_i2c);
> > + dev_err(&i2c->dev, "Failed to register usbc i2c client %d\n", ret);
>
> "USB-C I2C"?
MT6370 have two slave address, one is for the USB PD module and
another one is for other modules.
So we use "USB-C I2C" to refer to the USB PD module.
>
> > + return ret;
> > + }
> > +
> > + /* Assign I2C client for PMU and TypeC */
> > + info->i2c[MT6370_PMU_I2C] = i2c;
> > + info->i2c[MT6370_USBC_I2C] = usbc_i2c;
> > +
> > + info->regmap = devm_regmap_init(&i2c->dev, &mt6370_regmap_bus, info,
> > + &mt6370_regmap_config);
> > + if (IS_ERR(info->regmap)) {
> > + ret = PTR_ERR(info->regmap);
> > + dev_err(&i2c->dev, "Failed to register regmap (%d)\n", ret);
> > + return ret;
> > + }
> > +
> > + ret = mt6370_check_vendor_info(info);
> > + if (ret) {
> > + dev_err(&i2c->dev, "Failed to check vendor info (%d)\n", ret);
> > + return ret;
> > + }
> > +
> > + ret = devm_regmap_add_irq_chip(&i2c->dev, info->regmap, i2c->irq,
> > + IRQF_ONESHOT, -1, &mt6370_irq_chip,
> > + &info->irq_data);
> > + if (ret) {
> > + dev_err(&i2c->dev, "Failed to add irq chip (%d)\n", ret);
> > + return ret;
> > + }
> > +
> > + return devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO,
> > + mt6370_devices, ARRAY_SIZE(mt6370_devices),
> > + NULL, 0,
> > + regmap_irq_get_domain(info->irq_data));
> > +}
> > +
> > +static const struct of_device_id mt6370_match_table[] = {
> > + { .compatible = "mediatek,mt6370", },
> > + {}
> > +};
> > +MODULE_DEVICE_TABLE(of, mt6370_match_table);
> > +
> > +static struct i2c_driver mt6370_driver = {
> > + .driver = {
> > + .name = "mt6370",
> > + .of_match_table = mt6370_match_table,
> > + },
> > + .probe_new = mt6370_probe,
> > +};
> > +module_i2c_driver(mt6370_driver);
> > +
> > +MODULE_AUTHOR("ChiYuan Huang <cy_huang at richtek.com>");
> > +MODULE_DESCRIPTION("MT6370 I2C MFD Driver");
>
> Drop all references to "MFD" please.
OK, we will drop them in the next patch. Thank you so much!
>
> > +MODULE_LICENSE("GPL v2");
>
> --
> Lee Jones [李琼斯]
> Principal Technical Lead - Developer Services
> Linaro.org │ Open source software for Arm SoCs
> Follow Linaro: Facebook | Twitter | Blog
Best regards,
ChiaEn Wu
More information about the linux-arm-kernel
mailing list