[PATCH v13 0/9] ACPI/IORT: Support for IORT RMR node

[Steven Price]

On 15/06/2022 11:10, Shameer Kolothum wrote:
> Hi
> 
> v12 --> v13
>   -No changes. Rebased to 5.19-rc1.
>   -Picked up tags received from Laurentiu, Hanjun and Will. Thanks!.

You've already got my Tested-by tags, but just to confirm I gave this a
spin and it works fine.

Thanks,

Steve

> 
> Thanks,
> Shameer
> 
> From old:
> We have faced issues with 3408iMR RAID controller cards which
> fail to boot when SMMU is enabled. This is because these
> controllers make use of host memory for various caching related
> purposes and when SMMU is enabled the iMR firmware fails to
> access these memory regions as there is no mapping for them.
> IORT RMR provides a way for UEFI to describe and report these
> memory regions so that the kernel can make a unity mapping for
> these in SMMU.
> 
> Change History:
> 
> v11 --> v12
>   -Minor fix in patch #4 to address the issue reported by the kernel test robot.
>   -Added R-by tags by Christoph(patch #1) and Lorenzo(patch #4).
>   -Added T-by from Steve to all relevant patches. Many thanks!.
> 
> v10 --> v11
>  -Addressed Christoph's comments. We now have a  callback to 
>   struct iommu_resv_region to free all related memory and also dropped
>   the FW specific union and now has a container struct iommu_iort_rmr_data.
>   See patches #1 & #4
>  -Added R-by from Christoph.
>  -Dropped R-by from Lorenzo for patches #4 & #5 due to the above changes.
>  -Also dropped T-by from Steve and Laurentiu. Many thanks for your test
>   efforts. I have done basic sanity testing on my platform but please
>   do it again at your end.
> 
> v9 --> v10
>  - Dropped patch #1 ("Add temporary RMR node flag definitions") since
>    the ACPICA header updates patch is now in the mailing list
>  - Based on the suggestion from Christoph, introduced a 
>    resv_region_free_fw_data() callback in struct iommu_resv_region and
>    used that to free RMR specific memory allocations.
> 
> v8 --> v9
>  - Adressed comments from Robin on interfaces.
>  - Addressed comments from Lorenzo.
> 
> v7 --> v8
>   - Patch #1 has temp definitions for RMR related changes till
>     the ACPICA header changes are part of kernel.
>   - No early parsing of RMR node info and is only parsed at the
>     time of use.
>   - Changes to the RMR get/put API format compared to the
>     previous version.
>   - Support for RMR descriptor shared by multiple stream IDs.
> 
> v6 --> v7
>  -fix pointed out by Steve to the SMMUv2 SMR bypass install in patch #8.
> 
> v5 --> v6
> - Addressed comments from Robin & Lorenzo.
>   : Moved iort_parse_rmr() to acpi_iort_init() from
>     iort_init_platform_devices().
>   : Removed use of struct iort_rmr_entry during the initial
>     parse. Using struct iommu_resv_region instead.
>   : Report RMR address alignment and overlap errors, but continue.
>   : Reworked arm_smmu_init_bypass_stes() (patch # 6).
> - Updated SMMUv2 bypass SMR code. Thanks to Jon N (patch #8).
> - Set IOMMU protection flags(IOMMU_CACHE, IOMMU_MMIO) based
>   on Type of RMR region. Suggested by Jon N.
> 
> v4 --> v5
>  -Added a fw_data union to struct iommu_resv_region and removed
>   struct iommu_rmr (Based on comments from Joerg/Robin).
>  -Added iommu_put_rmrs() to release mem.
>  -Thanks to Steve for verifying on SMMUv2, but not added the Tested-by
>   yet because of the above changes.
> 
> v3 -->v4
> -Included the SMMUv2 SMR bypass install changes suggested by
>  Steve(patch #7)
> -As per Robin's comments, RMR reserve implementation is now
>  more generic  (patch #8) and dropped v3 patches 8 and 10.
> -Rebase to 5.13-rc1
> 
> RFC v2 --> v3
>  -Dropped RFC tag as the ACPICA header changes are now ready to be
>   part of 5.13[0]. But this series still has a dependency on that patch.
>  -Added IORT E.b related changes(node flags, _DSM function 5 checks for
>   PCIe).
>  -Changed RMR to stream id mapping from M:N to M:1 as per the spec and
>   discussion here[1].
>  -Last two patches add support for SMMUv2(Thanks to Jon Nettleton!)
> 
> Jon Nettleton (1):
>   iommu/arm-smmu: Get associated RMR info and install bypass SMR
> 
> Shameer Kolothum (8):
>   iommu: Introduce a callback to struct iommu_resv_region
>   ACPI/IORT: Make iort_iommu_msi_get_resv_regions() return void
>   ACPI/IORT: Provide a generic helper to retrieve reserve regions
>   ACPI/IORT: Add support to retrieve IORT RMR reserved regions
>   ACPI/IORT: Add a helper to retrieve RMR info directly
>   iommu/arm-smmu-v3: Introduce strtab init helper
>   iommu/arm-smmu-v3: Refactor arm_smmu_init_bypass_stes() to force
>     bypass
>   iommu/arm-smmu-v3: Get associated RMR info and install bypass STE
> 
>  drivers/acpi/arm64/iort.c                   | 360 ++++++++++++++++++--
>  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c |  78 ++++-
>  drivers/iommu/arm/arm-smmu/arm-smmu.c       |  52 +++
>  drivers/iommu/dma-iommu.c                   |   2 +-
>  drivers/iommu/iommu.c                       |  16 +-
>  include/linux/acpi_iort.h                   |  14 +-
>  include/linux/iommu.h                       |  10 +
>  7 files changed, 486 insertions(+), 46 deletions(-)
>