rk3399-roc-pc does not boot

[MR]

Am 17. Juni 2022 13:35:20 MESZ schrieb Corentin Labbe <clabbe.montjoie at gmail.com>:
>Le Fri, Jun 17, 2022 at 10:58:03AM +0100, Robin Murphy a écrit :
>> On 2022-06-17 10:06, Corentin Labbe wrote:
>> > Hello
>> > 
>> > I try to add rk3399-roc-pc to kernelCI but this board fail to ends its boot with any kernel I try.
>> > It boot normally up to starting init but it stucks shorty after.
>> > It fail on 5.10, 5.15, 5.17, 5.18 and linux-next.
>> > When disabling CONFIG_USB, the board boots successfully.
>> > 
>> > In dmesg I see OF: graph: no port node found in /i2c at ff160000/usb-typec at 22
>> > According to Documentation/devicetree/bindings/usb/fcs,fusb302.txt, the port is mandatory.
>> > Can it be possible that the problem was that the power port being disabled ?
>> 
>> Indeed, I believe the OF graph error is just a meaningless annoyance, 
>> but the general problem sounds like it's probably the same thing that's 
>> come up before:
>> 
>> https://lore.kernel.org/all/0ac6bbe7-6395-526d-213c-ac58a19d8673@fivetechno.de/
>> 
>> Disabling CONFIG_TYPEC_FUSB302 or blacklisting the fusb302 module should 
>> help confirm that. I have no idea if it's still an open problem, or if 
>> it's been fixed and you might just need to define the proper power role 
>> in the DT; this just triggered a memory of that older thread :)
>> 
>
>If I comment fusb0 node in arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi, the board boot well.
>
>With the following patch, the boards boot well also:
>diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
>index 0e45cc2d195b..60c400ca4034 100644
>--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
>+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
>@@ -552,6 +552,22 @@ fusb0: usb-typec at 22 {
>                pinctrl-0 = <&fusb0_int>;
>                vbus-supply = <&vcc_vbus_typec0>;
>                status = "okay";
>+
>+               connector {
>+                       compatible = "usb-c-connector";
>+                       data-role = "host";
>+                       label = "USB-C";
>+                       power-role = "dual";
>+
>+                       ports {
>+                               #address-cells = <1>;
>+                               #size-cells = <0>;
>+
>+                               port at 0 {
>+                                       reg = <0>;
>+                               };
>+                       };
>+               };
>        };
> 
>        mp8859: regulator at 66 {
>
>I think this patch is the proper way to fix, I will send it soon.
>
Thanks, happy to see that this works now.

>Linux-rockchip mailing list
>Linux-rockchip at lists.infradead.org
>http://lists.infradead.org/mailman/listinfo/linux-rockchip
>