[PATCH v3 2/3] dt-bindings: mfd: atmel,flexcom: Add new compatible string for lan966x

[Krzysztof Kozlowski]

On 12/06/2022 08:26, Kavyasree Kotagiri wrote:
> LAN966x SoC flexcoms has two optional I/O lines. Namely, CS0 and CS1
> in flexcom SPI mode. CTS and RTS in flexcom USART mode. These pins
> can be mapped to lan966x FLEXCOM_SHARED[0-20] pins and usage depends on
> functions being configured.
> 
> Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri at microchip.com>
> ---
> v2 -> v3:
>  - Add reg property of lan966x missed in v2.
> 
> v1 -> v2:
>  - Use allOf:if:then for lan966x dt properties
> 
>  .../bindings/mfd/atmel,flexcom.yaml           | 75 ++++++++++++++++++-
>  1 file changed, 73 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml
> index cee9c93ce4b9..d9b0fe2b0211 100644
> --- a/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml
> +++ b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml
> @@ -16,10 +16,13 @@ description:
>  
>  properties:
>    compatible:
> -    enum: atmel,sama5d2-flexcom
> +    enum:
> +      - atmel,sama5d2-flexcom
> +      - microchip,lan966x-flexcom

And here you have correct syntax...

>  
>    reg:
> -    maxItems: 1
> +    minItems: 1
> +    maxItems: 2
>  
>    clocks:
>      maxItems: 1
> @@ -46,6 +49,27 @@ properties:
>      $ref: /schemas/types.yaml#/definitions/uint32
>      enum: [1, 2, 3]
>  
> +  microchip,flx-shrd-pins:
> +    description: Specify the Flexcom shared pins to be used for flexcom
> +      chip-selects.
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      minimum: 0
> +      maximum: 20
> +
> +  microchip,flx-cs:
> +    description: Flexcom chip selects. Here, value of '0' represents "cts" line
> +      of flexcom USART or "cs0" line of flexcom SPI and value of '1' represents
> +      "rts" line of flexcom USART or "cs1" line of flexcom SPI.
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      minimum: 0
> +      maximum: 1
> +
>  patternProperties:
>    "^serial@[0-9a-f]+$":
>      description: See atmel-usart.txt for details of USART bindings.
> @@ -72,6 +96,25 @@ required:
>    - ranges
>    - atmel,flexcom-mode
>  
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: microchip,lan966x-flexcom
> +
> +    then:
> +      properties:
> +        reg:
> +          minItems: 2
> +          maxItems: 2

maxItems are not needed here.

> +          items:
> +            - description: Flexcom base regsiters map
> +            - description: Flexcom shared registers map
> +      required:
> +        - microchip,flx-shrd-pins
> +        - microchip,flx-cs

You need "else:" setting reg to maxItems:1 and disallowing the
properties (microchip,flx-cs:false). See for example:
https://elixir.bootlin.com/linux/v5.17-rc2/source/Documentation/devicetree/bindings/media/renesas,vsp1.yaml#L53



Best regards,
Krzysztof