[PATCH v3 3/4] tty: serial: atmel: remove enable/disable clock due to atmel_console_setup()

[Claudiu Beznea]

There is no need for clk_prepare_enable() at the beginning of
atmel_console_setup() and clk_disable_unprepare() at the end of
atmel_console_setup() as the clock is already enabled when calling
atmel_console_setup() and its disablement is done at the end
of probe.

Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
---
 drivers/tty/serial/atmel_serial.c | 16 ----------------
 1 file changed, 16 deletions(-)

diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 4cec97fd7241..3a94c2bdda72 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -2617,7 +2617,6 @@ static void __init atmel_console_get_options(struct uart_port *port, int *baud,
 
 static int __init atmel_console_setup(struct console *co, char *options)
 {
-	int ret;
 	struct uart_port *port = &atmel_ports[co->index].uart;
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 	int baud = 115200;
@@ -2630,10 +2629,6 @@ static int __init atmel_console_setup(struct console *co, char *options)
 		return -ENODEV;
 	}
 
-	ret = clk_prepare_enable(atmel_ports[co->index].clk);
-	if (ret)
-		return ret;
-
 	atmel_uart_writel(port, ATMEL_US_IDR, -1);
 	atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
 	atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN | ATMEL_US_RXEN);
@@ -2914,17 +2909,6 @@ static int atmel_serial_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_add_port;
 
-#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
-	if (uart_console(&atmel_port->uart)
-			&& ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) {
-		/*
-		 * The serial core enabled the clock for us, so undo
-		 * the clk_prepare_enable() in atmel_console_setup()
-		 */
-		clk_disable_unprepare(atmel_port->clk);
-	}
-#endif
-
 	device_init_wakeup(&pdev->dev, 1);
 	platform_set_drvdata(pdev, atmel_port);
 
-- 
2.34.1