[PATCH v3 30/40] arm64: dts: xilinx: align gpio-key node names with dtschema

[Krzysztof Kozlowski]

The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts | 2 +-
 arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 2 +-
 arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 2 +-
 arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 2 +-
 arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
index bb2602dd2805..20e83ca47b5d 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
@@ -52,7 +52,7 @@ memory at 0 {
 	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
-		fwuen {
+		key-fwuen {
 			label = "fwuen";
 			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index f6aad4159ccd..d61a297a2090 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -49,7 +49,7 @@ memory at 0 {
 	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
-		sw4 {
+		switch-4 {
 			label = "sw4";
 			gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 7b9a88b125d1..5fd6b70a154a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -47,7 +47,7 @@ memory at 0 {
 	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
-		sw19 {
+		switch-19 {
 			label = "sw19";
 			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_DOWN>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 20b7c75bb1d3..e2dd72fe33ce 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -47,7 +47,7 @@ memory at 0 {
 	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
-		sw19 {
+		switch-19 {
 			label = "sw19";
 			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_DOWN>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index e36df6adbeee..d685d8fbc36a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -47,7 +47,7 @@ memory at 0 {
 	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
-		sw19 {
+		switch-19 {
 			label = "sw19";
 			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_DOWN>;
-- 
2.34.1