[PATCH v3 13/40] ARM: dts: marvell: align gpio-key node names with dtschema
Krzysztof Kozlowski
krzysztof.kozlowski at linaro.org
Wed Jun 15 17:53:06 PDT 2022
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
arch/arm/boot/dts/armada-370-c200-v2.dts | 8 ++++----
arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi | 6 +++---
arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi | 6 +++---
arch/arm/boot/dts/armada-381-netgear-gs110emx.dts | 2 +-
arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi | 4 ++--
arch/arm/boot/dts/armada-385-linksys.dtsi | 4 ++--
arch/arm/boot/dts/armada-388-clearfog-base.dts | 2 +-
arch/arm/boot/dts/armada-388-clearfog.dts | 2 +-
arch/arm/boot/dts/armada-xp-axpwifiap.dts | 4 ++--
arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 6 +++---
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 4 ++--
11 files changed, 24 insertions(+), 24 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370-c200-v2.dts b/arch/arm/boot/dts/armada-370-c200-v2.dts
index 1a4a09bdde63..84d40e1d70ef 100644
--- a/arch/arm/boot/dts/armada-370-c200-v2.dts
+++ b/arch/arm/boot/dts/armada-370-c200-v2.dts
@@ -75,25 +75,25 @@ keys {
pinctrl-0 = <&pmx_buttons>;
pinctrl-names = "default";
- power {
+ button-power {
label = "Power Button";
linux,code = <KEY_POWER>;
gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
};
- reset {
+ button-reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
- usb1 {
+ button-usb1 {
label = "USB1 Button";
linux,code = <BTN_0>;
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};
- usb2 {
+ button-usb2 {
label = "USB2 Button";
linux,code = <BTN_1>;
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
index b52634ecf1d9..cf7bffdd1c21 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
@@ -111,19 +111,19 @@ gpio-keys {
#address-cells = <1>;
#size-cells = <0>;
- power {
+ button-power {
label = "Power button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
- backup {
+ button-backup {
label = "Backup button";
linux,code = <KEY_OPTION>;
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
- reset {
+ button-reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
index 0abac5ffe45a..6c33e3ba4ffb 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
@@ -86,19 +86,19 @@ gpio-keys {
#address-cells = <1>;
#size-cells = <0>;
- power {
+ button-power {
label = "Power button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
debounce-interval = <100>;
};
- reset {
+ button-reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
- button {
+ button-usb {
label = "USB VBUS error";
linux,code = <KEY_UNKNOWN>;
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
index 396172067f6a..095df5567c93 100644
--- a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
+++ b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
@@ -24,7 +24,7 @@ gpio-keys {
pinctrl-0 = <&front_button_pins>;
pinctrl-names = "default";
- factory_default {
+ key-factory-default {
label = "Factory Default";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
index 10ad46f29393..d1452a04e904 100644
--- a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
+++ b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
@@ -256,14 +256,14 @@ gpio-keys {
pinctrl-0 = <&cf_gtr_rear_button_pins &cf_gtr_front_button_pins>;
pinctrl-names = "default";
- button_0 {
+ button-0 {
label = "Rear Button";
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
linux,can-disable;
linux,code = <BTN_0>;
};
- button_1 {
+ button-1 {
label = "Front Button";
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
linux,can-disable;
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index fb9c8a0b241c..116aca5e688f 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -53,13 +53,13 @@ gpio_keys: gpio-keys {
pinctrl-0 = <&gpio_keys_pins>;
pinctrl-names = "default";
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
};
- reset {
+ button-reset {
label = "Factory Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-388-clearfog-base.dts b/arch/arm/boot/dts/armada-388-clearfog-base.dts
index 53b4bd35522a..f7daa3bc707e 100644
--- a/arch/arm/boot/dts/armada-388-clearfog-base.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts
@@ -19,7 +19,7 @@ gpio-keys {
pinctrl-0 = <&rear_button_pins>;
pinctrl-names = "default";
- button_0 {
+ button-0 {
/* The rear SW3 button */
label = "Rear Button";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
index 4140a5303b48..95299167dcf5 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -35,7 +35,7 @@ gpio-keys {
pinctrl-0 = <&rear_button_pins>;
pinctrl-names = "default";
- button_0 {
+ button-0 {
/* The rear SW3 button */
label = "Rear Button";
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index 3e77b4337802..86a0ad9bd5cc 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -69,14 +69,14 @@ ethernet at 74000 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&keys_pin>;
pinctrl-names = "default";
- reset {
+ button-reset {
label = "Factory Reset Button";
linux,code = <KEY_SETUP>;
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 36932e3b781a..51b2eb8bb4fd 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -172,20 +172,20 @@ bm-bppi {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&keys_pin>;
pinctrl-names = "default";
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};
- reset {
+ button-reset {
label = "Factory Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 0efcc166dabf..ff698d6ebb87 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -97,12 +97,12 @@ green_led {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
- init {
+ button-init {
label = "Init Button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
--
2.34.1
More information about the linux-arm-kernel
mailing list