[PATCH v3 5/6] ARM: dts: renesas: Use new media bus type macros

[Laurent Pinchart]

Now that a header exists with macros for the media interface bus-type
values, replace hardcoding numerical constants with the corresponding
macros in the DT sources.

Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
 arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts       | 11 +++++++----
 .../dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi     |  4 +++-
 .../dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi     |  4 +++-
 3 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
index 4e58c54cde17..33ac4bd1e63b 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
@@ -7,6 +7,9 @@
  */
 
 /dts-v1/;
+
+#include <dt-bindings/media/video-interfaces.h>
+
 #include "r8a7742-iwg21d-q7.dts"
 
 / {
@@ -242,7 +245,7 @@ port {
 		vin0ep: endpoint {
 			remote-endpoint = <&cam0ep>;
 			bus-width = <8>;
-			bus-type = <6>;
+			bus-type = <MEDIA_BUS_TYPE_BT656>;
 		};
 	};
 };
@@ -273,7 +276,7 @@ port {
 		vin1ep: endpoint {
 			remote-endpoint = <&cam1ep>;
 			bus-width = <8>;
-			bus-type = <6>;
+			bus-type = <MEDIA_BUS_TYPE_BT656>;
 		};
 	};
 };
@@ -305,7 +308,7 @@ vin2ep: endpoint {
 			remote-endpoint = <&cam2ep>;
 			bus-width = <8>;
 			data-shift = <8>;
-			bus-type = <6>;
+			bus-type = <MEDIA_BUS_TYPE_BT656>;
 		};
 	};
 };
@@ -335,7 +338,7 @@ port {
 		vin3ep: endpoint {
 			remote-endpoint = <&cam3ep>;
 			bus-width = <8>;
-			bus-type = <6>;
+			bus-type = <MEDIA_BUS_TYPE_BT656>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
index 40cef0b1d1e6..c73160df619d 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
@@ -7,6 +7,8 @@
  * Copyright (C) 2020 Renesas Electronics Corp.
  */
 
+#include <dt-bindings/media/video-interfaces.h>
+
 #define CAM_ENABLED	1
 
 &CAM_PARENT_I2C {
@@ -26,7 +28,7 @@ port {
 			CAM_EP: endpoint {
 				bus-width = <8>;
 				data-shift = <2>;
-				bus-type = <6>;
+				bus-type = <MEDIA_BUS_TYPE_BT656>;
 				pclk-sample = <1>;
 				remote-endpoint = <&VIN_EP>;
 			};
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
index f5e77f024251..a7f5cfec64b8 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
@@ -7,6 +7,8 @@
  * Copyright (C) 2020 Renesas Electronics Corp.
  */
 
+#include <dt-bindings/media/video-interfaces.h>
+
 #define CAM_ENABLED	1
 
 &CAM_PARENT_I2C {
@@ -21,7 +23,7 @@ ov7725 at 21 {
 		port {
 			CAM_EP: endpoint {
 				bus-width = <8>;
-				bus-type = <6>;
+				bus-type = <MEDIA_BUS_TYPE_BT656>;
 				remote-endpoint = <&VIN_EP>;
 			};
 		};
-- 
Regards,

Laurent Pinchart