[PATCH V4 1/7] dt-bindings: soc: add i.MX93 SRC

Peng Fan peng.fan at nxp.com
Tue Jun 14 20:51:43 PDT 2022


> Subject: Re: [PATCH V4 1/7] dt-bindings: soc: add i.MX93 SRC
> 
> On Tue, Jun 14, 2022 at 11:22:43PM +0000, Peng Fan wrote:
> > > Subject: Re: [PATCH V4 1/7] dt-bindings: soc: add i.MX93 SRC
> > >
> > > On Thu, Jun 09, 2022 at 08:50:54PM +0800, Peng Fan (OSS) wrote:
> > > > From: Peng Fan <peng.fan at nxp.com>
> > > >
> > > > Add bindings for i.MX93 System Reset Controller(SRC). SRC supports
> > > > resets and power gating for mixes.
> > > >
> > > > Signed-off-by: Peng Fan <peng.fan at nxp.com>
> > > > ---
> > > >  .../bindings/power/fsl,imx93-src.yaml         | 96
> > > +++++++++++++++++++
> > > >  include/dt-bindings/power/fsl,imx93-power.h   | 11 +++
> > > >  2 files changed, 107 insertions(+)  create mode 100644
> > > > Documentation/devicetree/bindings/power/fsl,imx93-src.yaml
> > > >  create mode 100644 include/dt-bindings/power/fsl,imx93-power.h
> > > >
> > > > diff --git
> > > > a/Documentation/devicetree/bindings/power/fsl,imx93-src.yaml
> > > > b/Documentation/devicetree/bindings/power/fsl,imx93-src.yaml
> > > > new file mode 100644
> > > > index 000000000000..880500a841f7
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/power/fsl,imx93-src.yaml
> > > > @@ -0,0 +1,96 @@
> > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML
> > > > +1.2
> > > > +---
> > > > +$id:
> > > > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2F
> > > > +devi
> > > >
> > >
> +cetree.org%2Fschemas%2Fpower%2Ffsl%2Cimx93-src.yaml%23&data=0
> > > 5%7C
> > > >
> > >
> +01%7Cpeng.fan%40nxp.com%7Cbce11534c1f9456c1a4108da4e4e6d4d%7C6
> > > 86ea1d3
> > > >
> > >
> +bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637908395997226535%7CUnkn
> > > own%7CTWF
> > > >
> > >
> +pbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVC
> > > I6
> > > >
> > >
> +Mn0%3D%7C3000%7C%7C%7C&sdata=sTDHZ9BVww%2FFe2pwS%2Fjoz
> > > HPwWRmkU1hi
> > > > +966eGXzjFSk%3D&reserved=0
> > > > +$schema:
> > > > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2F
> > > > +devi
> > > >
> > >
> +cetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=05%7C01%7Cpeng
> > > .fan%
> > > >
> > >
> +40nxp.com%7Cbce11534c1f9456c1a4108da4e4e6d4d%7C686ea1d3bc2b4c6
> > > fa92cd9
> > > >
> > >
> +9c5c301635%7C0%7C0%7C637908395997226535%7CUnknown%7CTWFpbG
> > > Zsb3d8eyJWI
> > > >
> > >
> +joiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3
> > > 000%
> > > >
> > >
> +7C%7C%7C&sdata=xAU2zmsZDWOtCndpmKvMScG1XqjytSUnXLvzxR40p
> > > HY%3D&amp
> > > > +;reserved=0
> > > > +
> > > > +title: NXP i.MX93 System Reset Controller
> > > > +
> > > > +maintainers:
> > > > +  - Peng Fan <peng.fan at nxp.com>
> > > > +
> > > > +description: |
> > > > +  The System Reset Controller (SRC) is responsible for the
> > > > +generation of
> > > > +  all the system reset signals and boot argument latching.
> > > > +
> > > > +  Its main functions are as follows,
> > > > +  - Deals with all global system reset sources from other modules,
> > > > +    and generates global system reset.
> > > > +  - Responsible for power gating of MIXs (Slices) and their memory
> > > > +    low power control.
> > > > +
> > > > +properties:
> > > > +  compatible:
> > > > +    items:
> > > > +      - const: fsl,imx93-src
> > > > +      - const: syscon
> > > > +
> > > > +  reg:
> > > > +    maxItems: 1
> > > > +
> > > > +  slices:
> > >
> > > power-controller
> > >
> > > But if there aren't any other child nodes for the SRC, then why do
> > > you need this level at all? If there are others, then your binding is
> incomplete.
> >
> > Currently we not need other parts from driver, so I not add them. I
> > just add mix slices with name "slices". For U-Boot, we are not using
> > DTB for mem slices, so I not add mem slices.
> >
> > It has following mix slices.
> 
> What's a mix slice?

i.MX9 has many logic block named [x]mix, such as wakeupmix,
mediamix. One mix slice is for one mix block logic.

> 
> > 0 EdgeLock Enclave
> > 1 AONMIX
> > 2 WAKEUPMIX
> > 3 DDRMIX
> > 4 DDRPHY
> > 5 MLMIX
> > 6 NICMIX
> > 7 HSIOMIX
> > 8 MEDIAMIX
> > 9 CM33MIX
> > 10 CA55 core 0
> > 11 CA55 core 1
> > 12 CA55 cluster
> >
> > It has following mem slices:
> 
> What's a mem slice?

>From HW perspective, registers are actually memory.
So saying mem slice is for memory related stuff for
a mix.

> 
> > 0 AONMIX memory
> > 1 WAKEUPMIX memory
> > 2 DDRMIX memory
> > 3 DDRPHY memory
> > 4 MLMIX memory
> > 5 NICMIX memory
> > 6 OCRAM
> > 7 HSIOMIX memory
> > 8 MEDIA memory
> > 9 CA55 core 0 memory
> > 10 CA55 core 1 memory
> > 11 CA55 cluster memory
> > 12 L3 cache
> >
> > It has some general purpose functions that could be covered by SRC
> > node itself.
> 
> Please make bindings as complete as possible, not what some u-boot or linux
> currently uses or not.

ok, got it. Then do you think following is ok?

  mix-slices:
    type: object
    description: list of power domains provided by this controller.

    properties:
      '#address-cells':
        const: 1

      '#size-cells':
        const: 0

    patternProperties:
      "power-domain@[0-9]$":
        $ref: /schemas/power/power-domain.yaml#

        type: object
        properties:
          '#power-domain-cells':
            const: 0

          reg:
            description: |
              Power domain index. Valid values are defined in
              include/dt-bindings/power/imx93-power.h for fsl,imx93-src
            maxItems: 1

          clocks:
            description: |
              A number of phandles to clocks that need to be enabled
              during domain power-up sequencing to ensure reset
              propagation into devices located inside this power domain.
            minItems: 1
            maxItems: 5

        required:
          - '#power-domain-cells'
          - reg

  mem-slices:
    type: object
    description: list of power domains provided by this controller.

    properties:
      '#address-cells':
        const: 1

      '#size-cells':
        const: 0

    patternProperties:
      "power-domain@[0-9]$":
        $ref: /schemas/power/power-domain.yaml#

        type: object
        properties:
          '#power-domain-cells':
            const: 0

          reg:
            description: |
              Power domain index. Valid values are defined in
              include/dt-bindings/power/imx93-power.h for fsl,imx93-src
            maxItems: 1

          clocks:
            description: |
              A number of phandles to clocks that need to be enabled
              during domain power-up sequencing to ensure reset
              propagation into devices located inside this power domain.
            minItems: 1
            maxItems: 5

        required:
          - '#power-domain-cells'
          - reg

Thanks,
Peng.

> 
> Rob



More information about the linux-arm-kernel mailing list