[PATCH V3 0/6] remoteproc: imx_rproc: support i.MX8QM/QXP

[Peng Fan]

Bjorn, Mathieu

> Subject: [PATCH V3 0/6] remoteproc: imx_rproc: support i.MX8QM/QXP

Please give a look on this patchset if possible.

Thanks,
Peng.

> 
> From: Peng Fan <peng.fan at nxp.com>
> 
> V3:
>  Drop the dependency in V2.
>  Tested on i.MX8QM/8MM
>  Use 'fsl,resource-id' and 'fsl,entry-address' Per dt maintainer  Drop 'reg'
> property Per remoteproc maintainer  Drop mcore self recovery, until we land
> in common framework support.
> 
> V2:
> 
> https://patchwork.kernel.org/project/linux-remoteproc/cover/202203091021
> 18.8131-1-peng.fan at oss.nxp.com/
>  Depends on
> https://patchwork.kernel.org/project/linux-remoteproc/list/?series=621311
>  Tested on i.MX8QXP/QM/8MP
>  Addressed Mathieu's comments
>  Drop V1 patch 5/9, patch 3/9 is replaced with upper dependency patchset
> Move V1 patch 4/9 out to
> https://patchwork.kernel.org/project/linux-remoteproc/patch/202203080657
> 54.3355-1-peng.fan at oss.nxp.com/
>  Update commit log
>  Drop magic number to get entry address from device tree in patch 4/6
> 
> The V1 patchset:
> https://patchwork.kernel.org/project/linux-remoteproc/patch/202201110333
> 33.403448-4-peng.fan at oss.nxp.com/
> 
> Peng Fan (6):
>   dt-bindings: remoteproc: imx_rproc: support i.MX8QXP
>   dt-bindings: remoteproc: imx_rproc: support i.MX8QM
>   remoteproc: imx_rproc: support attaching to i.MX8QXP M4
>   remoteproc: imx_rproc: support kicking Mcore from Linux for i.MX8QXP
>   remoteproc: imx_rproc: support i.MX8QM
>   remoteproc: imx_rproc: request mbox channel later
> 
>  .../bindings/remoteproc/fsl,imx-rproc.yaml    |  16 ++
>  drivers/remoteproc/imx_rproc.c                | 222
> +++++++++++++++++-
>  2 files changed, 231 insertions(+), 7 deletions(-)
> 
> --
> 2.25.1