[PATCH v4 0/5] Add Chameleon v3 devicetree

[Dinh Nguyen]

On 6/3/22 04:23, Paweł Anikiel wrote:
> The Google Chameleon v3 is a board made for testing both video and audio
> interfaces of external devices. It acts as a base board for the
> Mercury+ AA1 module.
> 
> socfpga_arria10_mercury_aa1.dtsi and socfpga_arria10_chameleonv3.dts
> have also been sent to u-boot:
> https://lists.denx.de/pipermail/u-boot/2022-May/485107.html
> https://lists.denx.de/pipermail/u-boot/2022-May/485111.html
> 
> v4 changes:
>   - remove enclustra,mercury-aa1 from Arria 10 boards in dt-bindings
> 
> v3 changes:
>   - make seperate group for Chameleon v3 in dt-bindings
>   - add blank line after copyright header
> 
> v2 changes:
>   - split first patch into three
>   - move sdmmc-ecc node to socfpga_arria10.dtsi (instead of removing it entirely)
>   - use generic names for dts node names
>   - keep the enclustra,mercury-aa1 compatible
> 
> Paweł Anikiel (5):
>    ARM: dts: socfpga: Change Mercury+ AA1 dts to dtsi
>    ARM: dts: socfpga: Move sdmmc-ecc node to Arria 10 dts
>    ARM: dts: socfpga: Add atsha204a node to Mercury+ AA1 dts
>    ARM: dts: socfpga: Add Google Chameleon v3 devicetree
>    dt-bindings: altera: Add Chameleon v3 board
> 
>   .../devicetree/bindings/arm/altera.yaml       |  9 +-
>   arch/arm/boot/dts/Makefile                    |  2 +-
>   arch/arm/boot/dts/socfpga_arria10.dtsi        | 10 +++
>   .../boot/dts/socfpga_arria10_chameleonv3.dts  | 90 +++++++++++++++++++
>   ...1.dts => socfpga_arria10_mercury_aa1.dtsi} | 48 ++--------
>   5 files changed, 117 insertions(+), 42 deletions(-)
>   create mode 100644 arch/arm/boot/dts/socfpga_arria10_chameleonv3.dts
>   rename arch/arm/boot/dts/{socfpga_arria10_mercury_aa1.dts => socfpga_arria10_mercury_aa1.dtsi} (70%)
> 

Whole series applied!

Thanks,
Dinh