[PATCH v7 00/17] Move HEVC stateless controls out of staging
Benjamin Gaignard
benjamin.gaignard at collabora.com
Tue Jun 14 00:49:30 PDT 2022
This series aims to make HEVC uapi stable and usable for hardware
decoder. HEVC uapi is used by 2 mainlined drivers (Cedrus and Hantro)
and 2 out of the tree drivers (rkvdec and RPI).
version 7:
- Apply Jernej patches for Cedrus about bit offset definition and
V4L2_CID_STATELESS_HEVC_SLICE_PARAMS being a dynamic array control.
version 6:
- Add short_term_ref_pic_set_size and long_term_ref_pic_set_size
in v4l2_ctrl_hevc_decode_params structure.
- Change slice_pic_order_cnt type to s32 to match with PoC type.
- Set V4L2_CTRL_FLAG_DYNAMIC_ARRAY flag automatically when using
V4L2_CID_STATELESS_HEVC_SLICE_PARAMS control.
- Add a define for max slices count
- Stop using Hantro dedicated control.
This version has been tested with these branches:
- GStreamer: https://gitlab.freedesktop.org/benjamin.gaignard1/gstreamer/-/tree/HEVC_aligned_with_kernel_5.15
- Linux: https://gitlab.collabora.com/benjamin.gaignard/for-upstream/-/tree/HEVC_UAPI_V6
With patches to decode 10-bits bitstream and produce P010 frames the Fluster score
which was 77/147 before, is now 138/147.
The 10-bits series will comes after this because of it dependency to
uAPI change. If you are curious you can find the WIP branch here:
https://gitlab.collabora.com/benjamin.gaignard/for-upstream/-/commits/WIP_HEVC_UAPI_V6
The 9 failing tests are:
- CONFWIN_A_Sony_1 which contains conformance_window_flag that isn't supported
by the hardware (but visually ok aside a pixel shift).
- PICSIZE_{A,B,C,D}_Bossen_1 where resolutions are to big for Hantro hardware.
- TSKIP_A_MS_3 is ok when testing alone but fail (corrupted lines on the
first frame) when running it after a couple of other tests.
- VPSSPSPPS_A_MainConcept_1 where there is an issue on gst parser side
because of VPS/SPS/PPS ordering
- WPP_D_ericsson_MAIN_2 and WPP_D_ericsson_MAIN10_2 are visually ok but some
difference exist on 5 decoded frames. Some pixels values are no the same
the very end of few lines.
version 6:
- Stop using Hantro dedicated control and compute the number
of bytes to skip inside the driver.
- Rebased on media_tree/master
version 5:
- Change __u16 pic_order_cnt[2] into __s32 pic_order_cnt_val in
hevc_dpb_entry structure
- Add defines for SEI pic_struct values (patch 4)
- Fix numbers of bits computation in cedrus_h265_skip_bits() parameters
- Fix num_short_term_ref_pic_sets and num_long_term_ref_pics_sps
documentation (patch 8)
- Rebased on v5-18-rc1
GStreamer H265 decoder plugin aligned with HEVC uAPI v5:
https://gitlab.freedesktop.org/benjamin.gaignard1/gstreamer/-/tree/HEVC_aligned_with_kernel_5.15
Version 4:
- Add num_entry_point_offsets field in struct v4l2_ctrl_hevc_slice_params
- Fix V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS name
- Initialize control V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS
- Fix space/tab issue in kernel-doc
- Add patch to change data_bit_offset definition
- Fix hantro-media SPDX license
- put controls under stateless section in v4l2-ctrls-defs.c
At the end fluster tests results on IMX8MQ is 77/147 for HEVC codec.
Benjamin Gaignard (14):
media: uapi: HEVC: Add missing fields in HEVC controls
media: uapi: HEVC: Rename HEVC stateless controls with STATELESS
prefix
media: uapi: HEVC: Change pic_order_cnt definition in
v4l2_hevc_dpb_entry
media: uapi: HEVC: Add SEI pic struct flags
media: uapi: HEVC: Add documentation to uAPI structure
media: uapi: HEVC: Define V4L2_CID_STATELESS_HEVC_SLICE_PARAMS as a
dynamic array
media: uapi: Move parsed HEVC pixel format out of staging
media: uapi: Add V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS control
media: uapi: Move the HEVC stateless control type out of staging
media: controls: Log HEVC stateless control in .std_log
media: hantro: Stop using Hantro dedicated control
media: uapi: HEVC: fix padding in v4l2 control structures
media: uapi: Change data_bit_offset definition
media: uapi: move HEVC stateless controls out of staging
Hans Verkuil (3):
videodev2.h: add V4L2_CTRL_FLAG_DYNAMIC_ARRAY
v4l2-ctrls: add support for dynamically allocated arrays.
vivid: add dynamic array test control
.../media/v4l/ext-ctrls-codec-stateless.rst | 897 ++++++++++++++++++
.../media/v4l/ext-ctrls-codec.rst | 780 ---------------
.../media/v4l/pixfmt-compressed.rst | 7 +-
.../media/v4l/vidioc-g-ext-ctrls.rst | 20 +
.../media/v4l/vidioc-queryctrl.rst | 8 +
.../media/videodev2.h.rst.exceptions | 5 +
.../media/test-drivers/vivid/vivid-ctrls.c | 15 +
drivers/media/v4l2-core/v4l2-ctrls-api.c | 103 +-
drivers/media/v4l2-core/v4l2-ctrls-core.c | 206 +++-
drivers/media/v4l2-core/v4l2-ctrls-defs.c | 38 +-
drivers/media/v4l2-core/v4l2-ctrls-priv.h | 3 +-
drivers/media/v4l2-core/v4l2-ctrls-request.c | 13 +-
drivers/staging/media/hantro/hantro_drv.c | 62 +-
.../staging/media/hantro/hantro_g2_hevc_dec.c | 69 +-
drivers/staging/media/hantro/hantro_hevc.c | 10 +-
drivers/staging/media/hantro/hantro_hw.h | 4 +-
drivers/staging/media/sunxi/cedrus/cedrus.c | 25 +-
.../staging/media/sunxi/cedrus/cedrus_dec.c | 10 +-
.../staging/media/sunxi/cedrus/cedrus_h265.c | 23 +-
.../staging/media/sunxi/cedrus/cedrus_video.c | 1 -
include/media/hevc-ctrls.h | 250 -----
include/media/v4l2-ctrls.h | 48 +-
include/uapi/linux/v4l2-controls.h | 458 +++++++++
include/uapi/linux/videodev2.h | 13 +
24 files changed, 1848 insertions(+), 1220 deletions(-)
delete mode 100644 include/media/hevc-ctrls.h
--
2.32.0
More information about the linux-arm-kernel
mailing list