[PATCH net-next v4 5/5] net: stmmac: make mdio register skips PHY scanning for fixed-link

Ong, Boon Leong boon.leong.ong at intel.com
Mon Jun 13 23:55:34 PDT 2022


>diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>index 73cae2938f6..bc8edd88175 100644
>--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>@@ -1141,19 +1141,20 @@ static void stmmac_check_pcs_mode(struct
>stmmac_priv *priv)
>  */
> static int stmmac_init_phy(struct net_device *dev)
> {
>+	struct fwnode_handle *fwnode = of_fwnode_handle(priv->plat-
>>phylink_node);

This is an obvious mistake and will be fixed in next revision. 

> 	struct stmmac_priv *priv = netdev_priv(dev);
>-	struct device_node *node;
> 	int ret;
>
>-	node = priv->plat->phylink_node;
>+	if (!fwnode)
>+		fwnode = dev_fwnode(priv->device);
>
>-	if (node)
>-		ret = phylink_of_phy_connect(priv->phylink, node, 0);
>+	if (fwnode)
>+		ret = phylink_fwnode_phy_connect(priv->phylink, fwnode, 0);
>
> 	/* Some DT bindings do not set-up the PHY handle. Let's try to
> 	 * manually parse it
> 	 */
>-	if (!node || ret) {
>+	if (!fwnode || ret) {
> 		int addr = priv->plat->phy_addr;
> 		struct phy_device *phydev;
>
>diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
>b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
>index 03d3d1f7aa4..5f177ea8072 100644
>--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
>+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
>@@ -434,9 +434,11 @@ int stmmac_mdio_register(struct net_device *ndev)
> 	int err = 0;
> 	struct mii_bus *new_bus;
> 	struct stmmac_priv *priv = netdev_priv(ndev);
>+	struct fwnode_handle *fwnode = of_fwnode_handle(priv->plat-
>>phylink_node);
> 	struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat-
>>mdio_bus_data;
> 	struct device_node *mdio_node = priv->plat->mdio_node;
> 	struct device *dev = ndev->dev.parent;
>+	struct fwnode_handle *fixed_node;
> 	int addr, found, max_addr;
>
> 	if (!mdio_bus_data)
>@@ -490,6 +492,18 @@ int stmmac_mdio_register(struct net_device *ndev)
> 	if (priv->plat->has_xgmac)
> 		stmmac_xgmac2_mdio_read(new_bus, 0, MII_ADDR_C45);
>
>+	/* If fixed-link is set, skip PHY scanning */
>+	if (!fwnode)
>+		fwnode = dev_fwnode(priv->device);
>+
>+	if (fwnode) {
>+		fixed_node = fwnode_get_named_child_node(fwnode, "fixed-
>link");
>+		if (fixed_node) {
>+			fwnode_handle_put(fixed_node);
>+			goto bus_register_done;
>+		}
>+	}
>+
> 	if (priv->plat->phy_node || mdio_node)
> 		goto bus_register_done;
>
>--
>2.25.1




More information about the linux-arm-kernel mailing list