[RFC PATCH 5/5] arm64: dts: ti: Add TI TPS65219 PMIC support for AM642 SK board.

[Mark Brown]

On Mon, Jun 13, 2022 at 11:06:04AM +0200, Jerome NEANNE wrote:

> +			buck2_reg: buck2 {
> +				regulator-name = "VCC1V8";
> +				regulator-min-microvolt = <1700000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};

The supply labelled 1V8 can vary between 1.7V and 1.8V?  That at least
deserves a comment.

You should only set boot-on for supplies where it is not possible to
read the current state.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20220613/d8699176/attachment.sig>